Tuya Temperature Humidity Sensor

Contents

Tuya WiFi Zigbee Temperature Humidity Sensor User Manual

Model: Temperature Humidity Sensor

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Tuya WiFi Zigbee Temperature Humidity Sensor. Please read this manual thoroughly before using the device to ensure safe and optimal performance.

2. Safety Information and Warnings

WARNING: Keep out of reach of children. In case of ingestion, seek medical attention immediately.

Important Safety Information:

  • Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

For more detailed safety guidelines, please refer to the User Manual PDF.

3. Package Contents

Please check the package for the following items:

  • Tuya WiFi Zigbee Temperature Humidity Sensor
  • User Manual (this document)
  • Bracket (for angle adjustment)

Note:

AAA*3 batteries are NOT included and must be purchased separately.

4. Device Overview

The sensor features a clear LCD display showing real-time temperature, humidity, time, date, and battery status. It includes a backlight for visibility in low-light conditions.

Tuya WiFi Zigbee Temperature Humidity Sensor front view

Image: Front view of the sensor displaying temperature (23.8°C), humidity (58%), time, date, and battery level. It also indicates DRY, COMFORT, and WET zones.

5. Setup Guide

5.1. Battery Installation

  1. Locate the battery compartment on the back of the sensor.
  2. Insert three AAA batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment cover securely.

5.2. App Download and Installation

This device works with the Smart Life app.

  1. Scan the QR code on the product packaging or search for "Smart Life" in your smartphone's app store (Google Play Store for Android or Apple App Store for iOS).
  2. Download and install the "Smart Life" app.
  3. Register or log in to your Smart Life account.

5.3. Device Pairing (WiFi + Bluetooth)

The sensor supports both WiFi and Bluetooth for faster network connection. For Zigbee versions, a Zigbee gateway is required.

Steps to add device to Smart Life app

Image: Step-by-step guide for adding the sensor to the Smart Life app. It shows opening WiFi and Bluetooth, pressing the sensor button for 5 seconds, the app searching for the device, and automatic connection.

  1. Ensure your smartphone's WiFi and Bluetooth are turned on.
  2. Open the Smart Life app. A window may pop up automatically to add the device.
  3. On the sensor, press and hold the main button for approximately 5 seconds until the pairing indicator appears or flashes.
  4. In the Smart Life app, tap "Add Device" or the "+" icon. The app will search for nearby devices.
  5. Select the "WiFi Temperature & Humidity Sensor" from the discovered devices.
  6. Enter your 2.4GHz WiFi network password when prompted and confirm.
  7. The device will connect automatically. Once connected, you can rename the device.

Video: Demonstrates the WiFi Bluetooth pairing process, intelligent linkage setup, real-time monitoring, alarm management, and function settings within the Smart Life app.

5.4. Zigbee Gateway Requirement

If you have purchased the Zigbee version of this sensor, it requires a Zigbee gateway (hub) to connect to your smart home network and the Smart Life app. Ensure your Zigbee gateway is properly set up and connected to the app before attempting to pair the sensor.

6. Operating Instructions

6.1. Real-time Monitoring

Once connected, you can view the current temperature and humidity readings directly on the sensor's LCD display or remotely via the Smart Life app. The app also provides historical data with graphical representations.

App remote control of temperature and humidity sensor

Image: Screenshot of the Smart Life app showing real-time temperature (28.6°C) and humidity (55%) readings, along with a historical graph.

6.2. Backlight Operation

The sensor features a backlight for improved visibility in dark environments. Press the reset button (usually the main button) briefly to trigger the backlight. It will illuminate for approximately 10 seconds.

Backlight supported feature

Image: Demonstrates the sensor with backlight off and on, activated by pressing the reset button.

6.3. Temperature Unit Conversion (°C/°F)

You can switch between Celsius (°C) and Fahrenheit (°F) display units through the Smart Life app settings for the device. The unit conversion setting is typically found under the device's settings menu.

Celsius and Fahrenheit option in app

Image: Screenshots of the Smart Life app showing temperature displayed in both Celsius (20.2°C) and Fahrenheit (68.3°F).

6.4. Intelligent Linkage (Automation)

Integrate your sensor with other smart devices to create automated scenes based on temperature and humidity conditions.

  • Example 1: Air Conditioner Control
    Set a rule: If the indoor temperature reaches 30°C, then turn on the air conditioner. (Requires a compatible WiFi IR Remote, sold separately).
    Intelligent linkage with air conditioner

    Image: Smart Life app showing an automation rule: IF WiFi Temperature & Humidity Sensor Temperature > 30°C THEN Air Conditioner Mode Cool, Temperature 16, Speed Auto ON.

  • Example 2: Humidifier Control
    Set a rule: If the humidity drops below 68%, then turn on the humidifier.
    Intelligent linkage with humidifier

    Image: Smart Life app showing an automation rule: IF WiFi Temperature & Humidity Sensor Humidity < 68% THEN turn on humidifier. Also shows humidity ranges: Dry (0-40%), Comfort (40-70%), Moist (70-100%).

6.5. Alarm Management

Set custom upper and lower limits for temperature and humidity in the Smart Life app. If the readings go outside these set ranges, you will receive notifications.

Alarm management settings in app

Image: Smart Life app showing alarm settings for temperature (e.g., -10°C to 39°C) and humidity (e.g., 20% to 68%), along with device history and alarm notifications.

6.6. Group Control Function

If you have multiple sensors or other smart devices, you can group them within the Smart Life app for simultaneous control or to manage them by room.

Group control function in app

Image: Smart Life app interface demonstrating how to create a group to control multiple temperature and humidity sensors in different rooms.

6.7. Offline Notification

Enable the offline notification feature in the Smart Life app to be alerted if your sensor loses connection to the network (e.g., due to power failure or WiFi issues).

Offline notification setting in app

Image: Smart Life app showing the "Offline Notification" toggle switch within the device settings.

6.8. Voice Control

The sensor is compatible with Amazon Alexa and Google Home Assistant. Link your Smart Life account to your voice assistant app to control and query the sensor using voice commands.

Voice control with Alexa and Google Home

Image: Illustration of using Alexa to turn on an air conditioner, demonstrating voice control capabilities.

7. Maintenance

7.1. Cleaning

Wipe the sensor's exterior with a soft, dry cloth. Do not use abrasive cleaners or allow water to enter the device.

7.2. Battery Replacement

When the battery indicator on the display or in the app shows low power, replace the three AAA batteries promptly to ensure continuous operation and accurate readings.

8. Troubleshooting

  • Device not connecting to app: Ensure your WiFi is 2.4GHz, Bluetooth is on, and the sensor is in pairing mode (button held for 5 seconds). Check WiFi signal strength.
  • Inaccurate readings: Ensure the sensor is placed in a location with good air circulation, away from direct sunlight, heat sources, or drafts. Allow some time for readings to stabilize after placement or battery change.
  • Offline status: Check your WiFi router and internet connection. Ensure the sensor is within WiFi range. If using Zigbee, check the gateway status.
  • Backlight not working: Ensure batteries are not depleted.

9. Specifications

Product parameters diagram

Image: Diagram showing the dimensions and key product parameters.

ParameterValue
Dimensions5.6cm (L) x 5.6cm (W) x 2.3cm (H)
Connection WayWiFi + Bluetooth (Zigbee option available)
Input VoltageDC4.5V (LR03*3 AAA batteries, NOT Included)
Wireless Type2.4GHz IEEE 802.11b/g/n
Temperature Measure Range-10°C ~ 55°C
Temperature Accuracy±1°C
Humidity Measure Range10% RH ~ 99% RH
Humidity Accuracy±5% RH
Quiescent Current≤ 30uA
BacklightSupported

10. User Tips

To optimize your experience with the sensor:

  • For best accuracy, place the sensor in a central location within the room, away from windows, doors, and direct airflow from HVAC systems.
  • Regularly check the battery level in the app to avoid interruptions in monitoring.
  • Utilize the intelligent linkage features to automate your home environment for comfort and energy efficiency.

11. Warranty and Support

For warranty information, technical support, or further assistance, please contact your original seller or refer to the product listing page. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.