Important Safety Instructions
WARNING: High Voltage - Handle with care and ensure proper connection before use. Risk of electric shock and serious injury.
When using this electric product, basic precautions must always be followed. This manual contains important instructions for the safe use and maintenance of the adapter.
- Read all instructions before using this product.
- Do not put fingers into the adapter.
- Do not use this product if the flexible output cable, vehicle connector, vehicle inlet, or the adapter itself has broken insulation, broken or cracked housings, or if internal parts are accessible (including wiring).
- Do not use this adapter with any charger capable of operating in dynamic current control mode or boost current mode, as this may exceed the adapter's rating. This poses a risk of shock and fire.
- Always connect the adapter to the vehicle inlet first, then connect the vehicle connector (charger) to the adapter. When disconnecting, reverse this order.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Product Overview
The GUWIEYG CCS2 to NACS AC DC Adapter allows Tesla vehicles (NACS compatible) to charge from CCS2 Superchargers and Type2 AC chargers.

Figure 1: GUWIEYG CCS2 to NACS Adapter showing its design and markings.
Components:
- NACS Coupler: Connects to your Tesla vehicle's charging port.
- CCS2 Supercharger Inlet: Accepts CCS2 charging cables for DC fast charging.
- Type2 AC Charger Inlet: Accepts Type2 AC charging cables for AC charging.

Figure 2: Adapter compatibility with CCS2 and Type 2 chargers.
Setup and Installation
The adapter is designed for straightforward use. Ensure your vehicle is NACS compatible.
Compatibility:
- Vehicles: NACS compatible EVs (e.g., Tesla Model 3, Model X, Model Y).
- Chargers: CCS2 Superchargers, Type2 AC chargers (Portable Chargers, Charging Stations, other EV chargers).

Figure 3: Adapter is compatible with all NACS EVs.
Connection Procedure:
- Ensure your vehicle is parked safely and turned off.
- Connect the GUWIEYG adapter firmly to your Tesla vehicle's NACS charging inlet.
- Connect the CCS2 or Type2 charging cable from the charging station firmly into the corresponding inlet on the GUWIEYG adapter.
- Initiate charging from the vehicle or charging station as per their instructions.
Disconnection Procedure:
- Stop the charging session from your vehicle or the charging station.
- Disconnect the CCS2 or Type2 charging cable from the GUWIEYG adapter.
- Disconnect the GUWIEYG adapter from your Tesla vehicle's NACS charging inlet.
Video 1: Unboxing and demonstration of connecting the adapter to a charger.
Operating Instructions
- Do not disconnect the adapter or charging cable during an active charging session.
- Protect the adapter from excessive water and moisture.
- Operate the adapter within the specified temperature range of -30°C to +50°C.
- Handle the adapter with care and store it in a safe, dry location when not in use.
Charging Time:
Charging time will vary based on several factors:
- The power output of the supercharger or AC charging station.
- Your electric vehicle's specifications and charging capabilities.
- Environmental conditions (e.g., ambient temperature).
- Your vehicle's battery temperature and state of charge.
The adapter includes built-in temperature monitoring. If the internal temperature exceeds 85°C, the charging power may automatically decrease to prevent overheating and ensure safety.
Maintenance
- To clean the adapter, use a soft, dry cloth. Do not use detergents, solvents, or abrasive cleaners.
- Do not attempt to open, modify, or repair the adapter. Unauthorized modifications can void the warranty and pose safety risks.
Troubleshooting
If your vehicle fails to initiate charging, consider the following steps:
- Vehicle CCS Support: Ensure your electric vehicle supports the CCS charging function.
- Check Connections: Verify that all connections are firm and secure at both the CCS2/Type2 charger end and the NACS vehicle end of the adapter.
- Reset Connection: Safely unplug the charging cable and adapter following the disconnection procedure, then reconnect them carefully.
- Verify Status: Check the charging status displayed on the Supercharger/charging station and your electric vehicle's display.
- Contact Support: If issues persist after following these steps, please contact GUWIEYG customer support for further assistance.
Specifications

Figure 4: Key electrical specifications of the adapter.
| Feature | Specification |
|---|---|
| Model | CCS2 TO NACS ADAPTER (AC+DC) |
| Rated Current | 300A DC / 32A (Single Phase) AC Max |
| Rated Input/Output Voltage | 1,000V DC / 250V AC Max |
| Power (W) | 300KW MAX |
| IP Rating | IP54 (Weatherproof) |
| Operating Temperature | -30°C to +50°C |
| Temperature Sensor Threshold | 85°C |
| Connector Type | NACS |
| Inlet Type | CCS2 Supercharger / IEC-62196 Type2 Charger |
| Material | PA66/Copper |
| Hign-concerned Chemical | None |
| Origin | Mainland China |
User Tips
- Firm Connections: Always ensure the adapter is firmly seated in both the vehicle and the charger to prevent interruptions or errors during charging.
- Charging Speed: Be aware that actual charging speeds can vary significantly based on the charging station's output, your vehicle's battery state, and environmental conditions.
- Protection: Keep the adapter protected from extreme weather conditions and physical impacts to maintain its integrity and performance.
- Quality Build: Users have noted the adapter's high-quality feel and solid construction, often coming with a convenient storage case.
Warranty and Support
Warranty:
This GUWIEYG CCS2 to NACS AC DC Adapter comes with a 1-year warranty from the date of purchase.
Customer Support:
For any maintenance, servicing, replacements, or if you require assistance with usage guidelines, troubleshooting, or repairs, please contact GUWIEYG customer support through the purchase channel where you acquired this adapter.
You can also refer to the official user manual PDF for additional details: View User Manual (PDF)