BroadLink RM4 Pro+ HTS2

Contents

BroadLink RM4 Pro+ HTS2 Universal Remote Hub User Manual

Model: RM4 Pro+ HTS2

1. Introduction

The BroadLink RM4 Pro+ HTS2 is a universal remote hub designed to integrate and control your infrared (IR) and radio frequency (RF) home appliances. Equipped with a temperature and humidity sensor (HTS2), it provides real-time environmental monitoring and enables smart automation. This device works seamlessly with voice assistants like Amazon Alexa and Google Assistant, offering a convenient way to manage your home.

2. What's Included

Please check the package contents upon unboxing:

  • RM4 Pro+ Device: 1 unit
  • Mounting Board: 1 unit
  • USB Cable: 1 unit (for power)
  • HTS2 USB Cable with Sensor: 1 unit (if purchased as a bundle)
  • User Guides: 2 units
BroadLink RM4 Pro+ HTS2 components: hub, smartphone app, USB cable, and sensor accessory.

Figure 2.1: BroadLink RM4 Pro+ HTS2 components including the hub, smartphone displaying the app, USB power cable, and the HTS2 sensor accessory.

3. Device Overview

3.1. Physical Features

  • LED Indicator: Located on the front of the device, it shows the device's status.
  • Reset Button: Located on the back, used for resetting the device to different setup modes.
  • Power Input (Micro USB): Located on the back, for connecting the power cable.

3.2. Dimensions

  • RM4 Pro+ Device: 84.4 mm (Length) x 84.4 mm (Width) x 31 mm (Height)
  • HTS2 USB Cable with Sensor: Approximately 1000 mm ± 50 mm in length
  • Mounting Board: 22.4 mm (Length) x 29.6 mm (Width) x 4.7 mm (Height)

3.3. LED Indicator Status

StatusIndication
Flashes quickly (5 times/sec)Device is in Smart Setup mode (waiting to be added).
Flashes intermittentlyDevice is in AP Setup mode (waiting to be added).
Flashes slowly then offDevice is being set up and added to the network.
Flashes slowly continuouslyDevice failed to connect to the network or is disconnected.
Flash onceIR or RF signal has been sent.

4. Setup

4.1. Powering On and Connecting HTS2 Sensor

  1. Connect the provided USB power cable to the Micro USB port on the back of the RM4 Pro+ device.
  2. Plug the other end of the USB cable into a 5V DC 1A power adapter (not included).
  3. If you have the HTS2 sensor cable, plug its Micro USB end into the power input port of the RM4 Pro+ device. The HTS2 cable will then provide power to the device while also functioning as a sensor.

4.2. Mounting the Device

The RM4 Pro+ can be placed on a flat surface or mounted on a wall using the included mounting board.

  1. Attach the small mounting board to the base of the RM4 Pro+ by twisting it into place.
  2. Secure the mounting board to your desired location (e.g., drywall) using appropriate screws (not included).
  3. Once the mounting board is secured, attach the RM4 Pro+ device to it.

4.3. App Installation and Device Pairing

  1. Download the BroadLink App from your smartphone's app store (iOS App Store or Google Play Store).
  2. Register or log in to your BroadLink account.
  3. Reset for Smart Setup: With the device powered on, use a needle or pin to press and hold the reset button for approximately 10 seconds until the LED indicator flashes quickly (5 times/sec). This puts the device into Smart Setup mode.
  4. In the BroadLink App, tap the '+' icon to add a new device.
  5. Follow the on-screen instructions to connect the RM4 Pro+ to your 2.4GHz Wi-Fi network. Ensure your Wi-Fi password contains no more than 32 non-special characters.
  6. Once successfully connected, the LED will flash slowly then turn off.

4.4. Adding Appliances

After pairing the RM4 Pro+ to the app, you can add your home appliances:

  1. In the BroadLink App, select your RM4 Pro+ device.
  2. Tap 'Add appliances' or the '+' icon within the device interface.
  3. Choose the type of appliance you want to add (e.g., TV, AC, Set-top Box, Fan, Bulb, Projector, etc.).
  4. Follow the app's instructions to either use a pre-set remote template or learn commands from your original remote control (IR or RF).

Video 4.1: Official product video demonstrating unboxing, device features, HTS2 sensor connection, mounting, and voice control setup.

5. Operating the Device

5.1. Universal Remote Control (IR & RF)

Once your appliances are added, you can control them directly from the BroadLink App. The RM4 Pro+ acts as a central hub, sending IR or RF signals to your devices.

Man using a smartphone to control an air conditioner remotely via the BroadLink hub.

Figure 5.1: Remote control of home appliances from anywhere using the BroadLink app.

5.2. Temperature & Humidity Monitoring

With the HTS2 sensor connected, the BroadLink App will display real-time temperature and humidity readings of the room where the RM4 Pro+ is located. This data can be used to trigger automated scenes.

BroadLink RM4 Pro+ hub connected to HTS2 sensor, with a smartphone displaying real-time temperature and humidity data.

Figure 5.2: Real-time temperature and humidity detection displayed in the BroadLink App.

5.3. Voice Control Integration

The RM4 Pro+ is compatible with Amazon Alexa and Google Assistant. Link your BroadLink account to your voice assistant app to enable voice commands for your connected appliances.

  • Example Commands:
    • "Alexa, turn on AC."
    • "Hey Google, turn on TV."
    • "Alexa, open curtain."
Person watching TV, with a speech bubble 'Alexa, I need to switch TV shows.' and 'Works with Alexa' and 'Works with Google Assistant' logos.

Figure 5.3: Voice control of TV via Alexa or Google Assistant.

5.4. Scene Creation and Automation

Utilize the BroadLink App to create custom scenes and automation routines based on time, sensor readings, or other triggers. For example, you can set your AC to turn on when the temperature reaches a certain level, or create a 'Good Night' scene that turns off all lights and closes curtains.

Woman sleeping, with a graph showing temperature/humidity changes throughout the night.

Figure 5.4: Automation based on environmental conditions for comfort, such as during sleep.

5.5. Multi-User Access

The BroadLink App allows you to invite members to control your smart home devices, enabling multiple family members to manage appliances.

Two women looking at a smartphone displaying the BroadLink app with an 'Invite members' option.

Figure 5.5: Sharing device control with family members through the BroadLink app.

6. Maintenance

  • Keep the device clean and free from dust by wiping it with a soft, dry cloth.
  • Ensure the device is used in a dry indoor environment only.
  • Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
  • Keep clear space around the device for optimal IR/RF signal transmission.

7. Troubleshooting

7.1. Cannot Add Device in App

  • Ensure your Wi-Fi network is 2.4GHz. The device does not support 5GHz Wi-Fi.
  • Verify that your Wi-Fi password contains no more than 32 non-special characters.
  • Avoid having too many devices on your network (typically no more than 15, including phones, tablets, laptops).

7.2. Failed to Learn Codes

  • Refer to the in-app instructions to correctly identify the type of your physical remote (IR or RF) and make the correct selection.
  • For IR learning, short-press the button on your physical remote.
  • For RF learning, long-press the button on your physical remote.
  • Ensure the RM4 Pro+ is within close proximity to the original remote during the learning process.

7.3. Device Not Found in Alexa/Google Home App

  • Alexa and Google Home recognize sub-devices (IR and RF appliances) rather than the universal remote itself.
  • Ensure that your IR and RF devices can be controlled from external networks within the BroadLink App before attempting to discover them in Alexa or Google Home.

7.4. HTS2 Sensor Cable Not Working

  • If you purchased the product with the HTS2 sensor cable, ensure it is properly connected to the RM4 Pro+ power input.
  • Temperature and humidity data should automatically display in the BroadLink App once the universal remote is successfully added and the sensor is connected.

8. Specifications

FeatureDetail
Model NumberRM4 Pro+HTS2
Power SourceDC 5V 1A (Adapter not included)
Communication MethodRF, Wi-Fi, IR
State of AssemblyReady-to-Go
Control Channels2 CHANNELS
RF Frequency305~335MHz and 430~440MHz (Note: 305-335MHz may not be available in certain regions like US, CA, AU, NZ, EU)
AppBroadLink APP
CertificationCE, RoHS, FCC
Usage EnvironmentIndoor, dry environment only

9. User Tips

  • The BroadLink RM4 Pro+ is known for its ease of learning and highly customizable functions, allowing you to tailor your smart home experience precisely to your needs.
  • Consider this device as an excellent and cost-effective alternative to expensive dedicated controllers for appliances like air conditioners, offering similar functionality at a fraction of the price.

10. Warranty and Support

This product comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support, further promotions, or additional information, please visit:

© 2023 BroadLink. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.