Honda CRF brake clutch lever

Contents

Motorcycle Brake Clutch Master Cylinder Rod User Manual

Brand: Honda | Model: CRF Brake Clutch Lever

1. Product Overview

This manual provides basic usage guidelines for the Motorcycle Brake Clutch Master Cylinder Rod, a key component for your motorcycle's control system. It covers aspects such as installation, operation, and maintenance. While specific details may vary, these guidelines are designed to help you properly install, use, and maintain this accessory.

The product is constructed from durable 6061-T6 Aluminum and is designed for a 22mm handlebar diameter.

Pair of Motorcycle Brake and Clutch Master Cylinder Rods
Figure 1: Pair of Motorcycle Brake and Clutch Master Cylinder Rods

2. Safety Warnings

Read and Understand: Before using this accessory, carefully read this manual and any specific instructions provided with the product in detail.

Professional Installation: Unless you possess the corresponding skills and experience, it is highly recommended that a professional technician install this component.

Suitability: Always ensure that the accessories match your specific motorcycle model, year, and specifications. Refer to the compatibility list in the specifications section.

Personal Protection: Wear appropriate protective equipment, such as gloves and eye protection, when installing or replacing accessories.

Comply with Regulations: Ensure that all accessories and their installation comply with local traffic regulations and safety standards.

Avoid Incompatible Accessories: Do not use accessories that are incompatible with your motorcycle. Using incompatible parts can lead to malfunction or damage.

Professional Repair: If the accessories are damaged or their performance is degraded, stop using them immediately and seek professional repair. Do not attempt repairs if you lack the necessary expertise.

3. Specifications

FeatureDetail
Condition100% Brand New
Material6061-T6 Aluminum (Metal)
Handlebar Diameter22mm (7/8")
Item TypeRopes & Cables
External Testing CertificationISO9001
Item Weight0.5kg
Item Dimensions (Approx.)Length: 1 inch, Width: 1 inch, Height: 1 inch (Note: These are general package dimensions, refer to detailed images for component dimensions)

Compatibility (Honda Models 2002-2012)

  • Honda CR125R (1996-2007)
  • Honda CR250R (1996-2007)
  • Honda CR500R (1992-2001)
  • Honda CRF150R (2007-2016)
  • Honda CRF250R (2004-2016)
  • Honda CRF250X (2004-2016)
  • Honda CRF450R (2002-2006)
  • Honda CRF450X (2005-2016)

Detailed Dimensions

Clutch Lever Assembly with dimensions
Figure 2: Clutch Lever Assembly showing 88mm lever length, 156mm total length, and 22mm clamp diameter.
Brake Master Cylinder Assembly with dimensions
Figure 3: Brake Master Cylinder Assembly showing 126mm lever length and 22mm clamp diameter.

4. Setup and Installation

Before beginning installation, ensure your motorcycle is stable and powered off. Gather all necessary tools and wear appropriate personal protective equipment.

  1. Remove Old Components: Carefully remove the existing brake master cylinder and clutch lever assemblies from your handlebar. Disconnect any hydraulic lines (for brake) or clutch cables. Be prepared for brake fluid spillage if working on the brake side.
  2. Clean Handlebar: Clean the handlebar area where the new assemblies will be mounted to ensure a secure fit.
  3. Mount New Assemblies: Slide the new brake master cylinder and clutch lever assemblies onto the 22mm handlebar. Position them comfortably for your riding style.
  4. Secure Clamps: Tighten the clamp bolts evenly to secure the assemblies to the handlebar. Do not overtighten, as this can damage the handlebar or the assembly.
  5. Connect Brake Line/Clutch Cable:
    • Brake Master Cylinder: Connect the hydraulic brake line to the master cylinder. Ensure a tight, leak-free connection.
    • Clutch Lever: Connect the clutch cable to the clutch lever mechanism.
  6. Bleed Brake System (if applicable): If installing the brake master cylinder, you will need to bleed the brake system to remove any air and ensure proper brake function. Refer to your motorcycle's service manual for the correct bleeding procedure.
  7. Adjust Levers: Adjust the reach and free play of both the brake and clutch levers to your preference. The clutch lever typically has an inline adjuster for cable tension (see Figure 6).
  8. Test Functionality: Before riding, thoroughly test both the brake and clutch for proper operation. Ensure smooth engagement and disengagement, and check for any leaks in the brake system.
Detailed view of the clutch lever mechanism
Figure 4: Detailed view of the clutch lever mechanism, showing cable attachment point.
Detailed view of the brake master cylinder mechanism
Figure 5: Detailed view of the brake master cylinder mechanism, showing hydraulic line connection.
Clutch lever assembly showing the cable adjuster
Figure 6: Clutch lever assembly showing the cable adjuster for fine-tuning tension.

5. Operation

The brake and clutch levers are essential controls for your motorcycle. Proper operation ensures safe and effective riding.

  • Brake Lever (Right Handlebar): This lever controls the front brake. Squeeze the lever smoothly and progressively to apply the front brake. Avoid sudden, hard squeezing unless in an emergency, as this can cause loss of traction.
  • Clutch Lever (Left Handlebar): This lever disengages the engine from the transmission, allowing for gear changes and smooth starting/stopping. Squeeze the lever fully to disengage the clutch, shift gears, and then release smoothly to engage.

Always ensure both levers operate freely and return to their resting positions without sticking.

6. Maintenance

Regular maintenance of your brake and clutch levers is crucial for safety and longevity.

  • Regular Inspection: Periodically check the levers for any signs of wear, damage, or bending. Ensure all bolts are tight and secure.
  • Lubrication: Apply a small amount of appropriate grease or lubricant to the pivot points of the levers to ensure smooth operation and prevent corrosion.
  • Brake Fluid Check (Brake Master Cylinder): Regularly check the brake fluid level in the reservoir (see Figure 7). Ensure it is between the MIN and MAX lines. Use only the recommended type of brake fluid for your motorcycle.
  • Brake Fluid Replacement: Brake fluid should be replaced according to your motorcycle manufacturer's recommendations, typically every one to two years, as it absorbs moisture over time.
  • Clutch Cable Inspection: For cable-operated clutches, inspect the clutch cable for fraying, kinks, or excessive wear. Lubricate the cable periodically.
  • Cleaning: Keep the levers and surrounding areas clean from dirt, grime, and brake fluid residue.
Top view of the brake master cylinder assembly, showing the fluid reservoir
Figure 7: Top view of the brake master cylinder assembly, showing the fluid reservoir cap and fluid level markings.

7. Troubleshooting

If you encounter issues with your brake or clutch levers, consider the following common problems and solutions:

  • Spongy Brake Lever: This often indicates air in the hydraulic brake system. The system needs to be bled to remove air. Check for leaks in the brake line or master cylinder.
  • Hard Brake Lever: Could be a seized caliper, clogged brake line, or a problem with the master cylinder itself. Professional inspection is recommended.
  • Clutch Slipping: If the engine revs but the motorcycle doesn't accelerate proportionally, the clutch might be slipping. This could be due to incorrect cable adjustment (too tight), worn clutch plates, or contaminated clutch plates. Adjust the cable first.
  • Clutch Dragging (difficulty shifting): If the clutch doesn't fully disengage, it can be hard to shift gears. This is often due to insufficient clutch cable free play (too loose) or warped clutch plates. Adjust the cable first.
  • Leaking Brake Fluid: Immediately identify the source of the leak (master cylinder, brake line, caliper). Do not ride the motorcycle until the leak is repaired and the system is properly bled.
  • Damaged or Degraded Performance: If any part of the assembly is damaged or its performance deteriorates, stop using it immediately and seek professional repair. Continuing to use a compromised component can lead to serious safety hazards.

8. User Tips

  • Regular Checks: Before each ride, quickly check both levers for smooth operation, proper free play, and any visible damage.
  • Fluid Type: Always use the brake fluid type specified in your motorcycle's owner's manual. Mixing fluid types or using the wrong type can cause system failure.
  • Lever Position: Adjust the lever position to ensure comfortable reach and optimal control, especially during long rides or aggressive maneuvers.
  • Cleanliness: Keep the brake fluid reservoir cap clean to prevent contaminants from entering the system when opened.
  • Cable Routing: Ensure clutch cables are routed correctly without sharp bends or kinks that could impede smooth operation or cause premature wear.

9. Warranty and Support

For information regarding warranty coverage, returns, or technical support, please refer to the seller's specific policies on the product page or contact the seller directly. Keep your purchase records for any warranty claims.

10. Additional Resources

A comprehensive user manual in PDF format is available for download, which may contain further detailed instructions and diagrams:

View User Manual (PDF)

© 2023 Honda Motorcycle Accessories. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.