1. Introduction
Thank you for choosing the TAIYEDQ LS-LX Series Emergency Stop Pull Rope Switch. This device is designed as a critical safety component for industrial applications, providing an immediate stop function when the pull rope is activated. It features high-quality materials, durable contacts, and robust construction for reliable performance.
Figure 1: Overview of TAIYEDQ Emergency Stop Pull Rope Switches (LS-LX and HFSKY models).
2. Safety Information
- Always disconnect power before installation, maintenance, or inspection.
- Installation should be performed by qualified personnel in accordance with local electrical codes and safety regulations.
- Ensure the pull rope is correctly installed and tensioned for proper operation.
- Do not modify the switch or its components.
- Regularly inspect the switch and pull rope for any signs of wear or damage.
3. Setup and Installation
3.1. Mounting
The switch should be securely mounted to a stable surface using appropriate fasteners through the designated mounting holes. Refer to the dimension diagrams for precise mounting hole locations and overall switch dimensions.
Figure 2: Technical drawing showing dimensions and mounting hole details (4-φ6).
Figure 3: Dimensions for HFSKY-S (Manual) and HFSKY-R (Automatic) models.
Figure 4: Dimensions for LS-LX-Z (Manual) and LS-LX-S (Automatic) models.
3.2. Pull Rope Installation
A pull rope is required for the operation of this switch and must be purchased separately. Ensure the pull rope is securely attached to the drawstring clasp setting on the switch and routed appropriately along the desired activation path. The rope should be tensioned correctly to allow for the specified action stroke.
Figure 5: Example of a 2-meter pull rope (sold separately).
3.3. Wiring
Access the internal wiring terminals by opening the switch housing. Connect the power and control circuits to the high-quality copper terminals. Ensure proper grounding is established via the designated ground protection point. The contact capacity is 380V 5A.
Figure 6: Internal view showing wiring hole, high-quality copper parts, and ground protection.
Figure 7: Close-up of the thickened copper dot silver contacts for durability.
4. Operating Instructions
The emergency stop pull rope switch is designed for immediate machine shutdown or process interruption. When the pull rope is activated (pulled), the switch changes its state, triggering the emergency stop circuit.
- Activation: Apply a force of at least 3KG to the pull rope, causing a stroke of >15+2mm. This will activate the emergency stop function.
- Manual Reset Models (e.g., LS-LX-Z, HFSKY-S): After activation, these models require manual intervention to reset the switch to its normal operating state. This typically involves pressing a reset button or lever on the switch.
- Automatic Reset Models (e.g., LS-LX-S, HFSKY-R): These models will automatically return to their normal state once the tension or force on the pull rope is released.
Figure 8: LS-LX-S (Automatic) and LS-LX-Z (Manual) models.
5. Maintenance
- Regular Inspection: Periodically check the switch housing, pull rope, and connections for any signs of physical damage, corrosion, or wear.
- Cleanliness: Keep the switch free from dust, dirt, and debris, which could impede its operation. Use a soft, dry cloth for cleaning.
- Contact Integrity: The switch features thickened copper dot silver contacts for durability, but ensure they remain free from excessive arcing or contamination.
- Rope Condition: Inspect the pull rope for fraying, cuts, or excessive slack. Replace the rope if any damage is observed.
6. Troubleshooting
- Switch Not Activating:
- Check if the pull rope is securely attached and properly tensioned.
- Ensure the action force (3KG) and stroke (>15+2mm) requirements are met.
- Inspect for any mechanical obstructions preventing the switch from moving.
- Switch Not Resetting:
- For manual reset models, ensure the reset mechanism is fully engaged.
- For automatic reset models, verify that the pull rope tension has been completely released and there are no obstructions.
- No Electrical Response:
- Verify all wiring connections are secure and correct.
- Check the power supply to the control circuit.
- Inspect the internal contacts for any visible damage or contamination.
7. Specifications
| Attribute | Specification |
|---|---|
| Product Name | Pull Switch |
| Brand | TAIYEDQ |
| Model Numbers | LS-LX (Manual/Auto), HFSKY-S (Manual), HFSKY-R (Automatic) |
| Item Type | SWITCHES |
| Features | Rope switch, Emergency Stop |
| Material | Aluminium alloy |
| Current Rating | 5A |
| Contact Capacity | 380V 5A |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| Action Stroke | >15+2mm |
| Action Force | 3KG |
| Protection Class | IP65 |
| Smart Device | No |
| Origin | Mainland China |
| Certification | NONE |
| Dimensions (HFSKY) | Body: 80mm (H) x 40mm (W) x 41mm (D); Total Height: 62mm/76mm (with eyelet) |
| Dimensions (LS-LX) | Total Height: 170mm; Body: 52mm (W) x 41.5mm (D) |
8. User Tips
- Rope Purchase: Remember that the pull rope is not included with the switch and must be purchased separately.
- Secure Installation: Always ensure the pull rope is securely attached and free from obstructions along its entire path for reliable emergency stop functionality.
- Model Choice: Select between manual and automatic reset models based on your specific application's safety protocols and operational requirements.
- Orientation: While primarily designed for linear pull, ensure the switch is mounted in an orientation that allows for unobstructed activation and reset.
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your TAIYEDQ Emergency Stop Pull Rope Switch, please contact your seller or the manufacturer directly.
A detailed user manual in PDF format may be available for download from the seller's product page or by contacting customer support. (Reference: User Manual PDF)