RACBOX Universal 12V-24V LED Brake Taillight

Contents

RACBOX Universal 12V-24V LED Brake Taillight User Manual

Model: Universal 12V-24V LED Brake Taillight (Batch/Serial Number: 020-06)

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of the RACBOX Universal 12V-24V LED Brake Taillight. This product is designed as an auxiliary accessory for motorcycle lighting, suitable for normal replacement and upgrade of original lights on various vehicles including Honda, Suzuki, Yamaha Cruiser Motorcycles, Trucks, and ATVs. It functions as a tail light, brake light, and turn signal with DRL (Daytime Running Light) capabilities.

RACBOX LED Tail Brake Light Bar installed on a motorcycle
RACBOX LED Tail Brake Light Bar installed on a motorcycle, demonstrating its function as a rear brake lamp and turn signal.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Package Contents

The package includes the following items:

  • 2 x LED Tail Brake Light Bars
  • 2 x Mounting Brackets
  • Mounting Hardware (screws, nuts)
  • Wiring Harnesses
Components of the RACBOX LED Tail Brake Light Bar kit
All components included in the RACBOX LED Tail Brake Light Bar kit.

4. Specifications

FeatureDetail
Model NameUniversal 12V-24V LED Brake Taillight
Voltage12V-24V
Battery IncludedNo
High-concerned chemicalNone
OriginMainland China
Waterproof RatingIP67
Dimensions (Light Bar)Length: 126mm (4.97"), Width: 19mm (0.75")
Mounting Height18mm (0.7")
Mounting Hole Distance88mm (3.5")
Mounting Bolt Length39mm (1.5")
Mounting Bolt Spacing23mm (0.9")
Wire Length590mm
Product size diagram for RACBOX LED Tail Brake Light Bar
Detailed dimensions of the LED light bar and mounting points.

5. Installation Instructions

  1. Disconnect Power: Turn off the motorcycle/vehicle and disconnect the negative battery terminal to prevent short circuits.
  2. Remove Old Taillight: Unscrew the stock taillight, carefully remove its housing, and unplug the existing wiring connector.
  3. Install New Taillight: Align the new taillight with the mounting holes on your vehicle and secure it firmly with the provided screws.

6. Wiring Diagram

The LED light bar uses a 3-wire connection system. Ensure correct polarity and function matching during connection.

  • Red Wire: Connect to DRL (Daytime Running Light) / Driving Light positive.
  • Yellow Wire: Connect to Turn Signal positive.
  • Black Wire: Connect to Negative / Ground.
Wiring diagram for the 3-wire LED light bar
Visual representation of the 3-wire connection: Red for DRL, Yellow for Turn Signal, Black for Negative.

Wire Connection Step: Connect the red wire to positive, black to negative. Match the function wires (e.g., yellow to turn signal positive) and wrap all connections with insulating tape for safety and weather protection.

7. Operating Instructions

After installation and wiring, reconnect power to your vehicle. Test the running light, brake light, and turn signals to ensure proper functionality. Tidy the wires and reinstall the housing.

Light Functions:

  • DRL (Daytime Running Light): Provides a constant light for enhanced visibility. Available in Red or White light styles depending on the product variant.
  • Turn Signal: Features a dynamic, flowing amber light effect to indicate turns.
Red DRL and flowing amber turn signal light effects
Demonstration of Red DRL and flowing amber turn signal light effects.
White DRL and flowing amber turn signal light effects
Demonstration of White DRL and flowing amber turn signal light effects.
Flowing amber turn signal effect
Close-up of the dynamic flowing amber turn signal effect.

Product demonstration video showing installation steps, light functions (DRL, turn signal), and IP67 waterproof testing.

8. Troubleshooting

  • Light Does Not Turn On: If the light does not illuminate after installation, please reverse the plug polarity. Incorrect polarity is a common cause for LED lights not functioning.

9. User Tips

  • Verify Dimensions: Before purchasing and installing, carefully check the product dimensions against your vehicle's mounting area to ensure a perfect fit.
  • Secure Wiring: Always ensure all wire connections are secure and properly insulated to prevent short circuits and water damage, especially given the IP67 waterproof rating.

10. Manufacturer & Support

This product meets relevant national automotive lighting industry standards and has undergone strict quality testing.

  • Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No. 1489, Fanghua Road Baiyun Guangzhou
  • EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND

For further assistance or detailed documentation, please refer to the official user manual PDF, which can be found at: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.