1. Introduction
Thank you for choosing the Aigo AR12 PC Case Fan. This manual provides detailed instructions for the installation, operation, and maintenance of your new ARGB cooling fans. Please read this manual carefully before installation to ensure proper setup and optimal performance.
Figure 1: Aigo AR12 Single Fan
Figure 2: Aigo AR12 Fan Kit with Controller and Remote
2. Safety Information
- Ensure your computer is powered off and unplugged from the wall outlet before installation.
- Handle components carefully to avoid damage.
- Do not attempt to modify the fan or its components.
- Keep out of reach of children.
- Refer to your motherboard manual for specific fan header locations and power limits.
3. Package Contents
Depending on the kit purchased, your package may include:
- Aigo AR12 Chassis Fan(s)
- Control Box (for multi-fan kits)
- Remote Control (for multi-fan kits)
- Mounting Screws
- Installation Guide (this manual)
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | AR12 |
| Voltage | 12V |
| Fan Speed | 1200 - 1350rpm |
| Used For | Case |
| Power Interface | 6pin, SATA, 5v-3pin ARGB |
| Package | Yes |
| Noise | 20dBA |
| Lines | 6 lines |
| Fan Life | 100000 hrs |
| Certification | CE, FCC, RoHS |
| Blade Quantity | 7 |
| Bearing | Fluid Bearing |
| Air Volume | 48 |
| Origin | Mainland China |
| Brand Name | Aigo |
| Series | ventilador |
| Power (W) | 3 |
| Fan Size | 120 MM |
5. Setup and Installation
Follow these steps to install your Aigo AR12 PC Case Fans:
5.1 Physical Installation
- Identify suitable mounting locations in your PC case (e.g., front, top, rear, bottom).
- Secure each fan to the desired location using the provided mounting screws. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
5.2 Control Box Wiring (for multi-fan kits)
The control box manages power and ARGB lighting for multiple fans and LED strips. Refer to the diagram below for connections:
Figure 3: Control Box Wiring Diagram
- Power: Connect the SATA power port on the control box to a SATA power connector from your power supply unit (PSU).
- Fans (FAN1-10): Connect the 6-pin fan cables from your AR12 fans to the corresponding 6-pin ports on the control box. Connect them in sequence from FAN1 to FAN10.
- Reset: To control the fan lighting via your computer case's reset button, connect the case's reset cable to the 'RESET' port on the control box.
- LED1-2: To connect additional LED strips, use these ports.
5.3 Motherboard ARGB Sync (Optional)
If your motherboard supports 5V-3pin ARGB (Addressable RGB) synchronization, you can connect the control box to your motherboard to control lighting effects via motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion). Ensure your motherboard has a 5V-3pin ARGB header. Do NOT connect to a 12V-4pin RGB header, as this can damage the LEDs.
Figure 4: Motherboard ARGB Sync Connection
- Connect the 'M/B SYNC' cable from the control box to your motherboard's 5V-3pin ARGB header.
- Switch the RC/MB switch on the remote control to 'MB' mode to enable motherboard control.
6. Operation
The Aigo AR12 fans can be controlled via the included remote control or synchronized with your motherboard's ARGB software.
6.1 Remote Control Usage
The remote control allows for independent control of lighting and fan speed. Ensure the RC/MB switch on the remote is set to 'RC' for remote control operation.
Figure 5: Remote Control Layout
- ON/OFF: The 'ON' key is responsible for switching lights on/off. Fan speed control is independent. The 'OFF' key is only responsible for switching lights off.
- M+/M-: Mode adjustment keys.
- S+/S-: Speed adjustment keys for lighting effects.
- AUTO: Cycles through all pre-programmed lighting patterns sequentially. Each pattern executes for 5 seconds.
- Brightness Keys: Adjust the luminosity of the lighting.
- Seven Color Monochromatic Shortcut Keys: Directly select a single color.
- RC/MB Switch: Toggles between remote control (RC) and motherboard synchronization (MB) modes.
6.2 Visual Demonstration
Watch this video to see the Aigo AR12 fans in action, showcasing their vibrant ARGB lighting effects:
Video 1: Aigo AR12 Fan RGB Lighting Demonstration
Figure 6: Installed Fans with RGB Lighting
7. Maintenance
To ensure the longevity and optimal performance of your Aigo AR12 fans:
- Regularly clean the fan blades and housing with a soft, dry cloth or compressed air to remove dust buildup.
- Ensure no cables are obstructing the fan blades.
- Avoid exposing the fans to excessive moisture or extreme temperatures.
8. Troubleshooting
- Fans not spinning: Check all power connections, especially the SATA power to the control box and the 6-pin fan connections. Ensure the PSU is providing power.
- RGB lights not working: Verify the 6-pin fan connections to the control box. If using motherboard sync, ensure the 5V-3pin ARGB cable is correctly connected and the remote switch is set to 'MB'. If using remote control, ensure the switch is set to 'RC' and the remote's battery is functional.
- Lights stuck on one color or not changing: If using motherboard sync, check your motherboard's ARGB software settings. If using remote, try cycling through modes with M+/M- or pressing AUTO.
- Fans making unusual noise: Check for any cable obstructions or debris caught in the fan blades. Ensure fans are securely mounted.
9. User Tips
- Check Connector Compatibility: Before purchasing, verify your motherboard has a compatible 5V-3pin ARGB header if you plan to use motherboard synchronization. The fans use a 6-pin connector for power and RGB, which connects to the Aigo control box, not directly to standard motherboard fan headers.
- Kits Include Controllers: If you need a controller and remote for RGB effects and fan management, ensure you purchase a multi-fan kit, as single fans typically do not include these accessories.
- Fan Direction: Pay attention to the fan's orientation during installation to ensure optimal airflow (intake or exhaust) for your PC case.
10. Frequently Asked Questions (FAQ)
- Q: What is the practical use of this item?
- A: The Aigo AR12 fan is primarily used for cooling computer cases, helping to dissipate heat and maintain optimal operating temperatures for PC components.
- Q: Is the connection 6-pin?
- A: Yes, the fans connect to the control box via a 6-pin interface. The control box itself is powered by a SATA connector and can connect to a motherboard via a 5V-3pin ARGB header for synchronization.
- Q: Do the fan kits (e.g., 4-fan or 7-fan kits) include a controller and remote?
- A: Yes, typically the multi-fan kits include a dedicated control box and a remote control for managing the fans and their ARGB lighting effects.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the official Aigo website or contact your retailer. You may also find additional resources and documents, such as a user manual in PDF format, available from the seller.
A user manual (PDF) is available for download: View User Manual (PDF)