Ziqqucu YS-DZ-3.1

Contents

Ziqqucu YS-DZ-3.1 Universal LCD LED TV Backlight Driver Board

Instruction Manual

1. Introduction

The Ziqqucu YS-DZ-3.1 is a universal constant current driver board designed for LED LCD TV backlights, compatible with screens ranging from 10 to 65 inches. This boost adapter board provides a wide voltage input and automatically adjusts the output voltage to suit the specific requirements of your LED light strip, ensuring optimal performance and longevity for your display.

Front view of the YS-DZ-3.1 LCD TV universal backlight plate

Figure 1: Front view of the YS-DZ-3.1 board, highlighting input/output voltage and automatic regulation capabilities.

2. Features

  • Wide Voltage Input and Output: Designed with a lifting pressure plate for broad compatibility.
  • Automatic Voltage Adjustment: Output voltage automatically adjusts to match the requirements of your LED light strip.
  • Flexible Input Wiring: Supports two distinct wiring methods for input voltage determination.
  • Compact and Powerful: Small form factor with high power delivery capabilities.
  • Universal Compatibility: Suitable for 14-inch to 65-inch LED LCD TV universal backlight boards.
  • Included Cables: Comes with necessary input and output connecting wires for convenience.

3. Specifications

Parameter Value
Model YS-DZ-3.1
Type Voltage Regulator / Backlight Driver Board
Input Voltage 12-200V DC
Output Voltage Automatically adjustable between 24-400V DC
Output Current 300mA
Dimensions (L x W) 72mm x 44mm (2.83in x 1.73in)
Origin Mainland China
Dimensions of the YS-DZ-3.1 driver board

Figure 2: Physical dimensions of the YS-DZ-3.1 driver board.

4. Installation and Wiring

This driver board utilizes a wide voltage input and output method. The output voltage is automatically adjusted to match your lamp strip's requirements. The input voltage can be determined using two primary wiring methods.

4.1 Input Wiring Methods

Refer to the wiring diagrams below for detailed connection instructions.

Detailed wiring diagram for the YS-DZ-3.1 board

Figure 3: Detailed wiring diagram showing connections for power, ground, BLON signal, and LED output.

Simplified block diagram of wiring connections

Figure 4: Simplified block diagram illustrating the main input and output connections.

  1. Method 1 (Using two red and yellow wires for 12V input):

    • Connect the red and yellow wires together to a 12V DC power source.
    • Connect the blue wire to the BLON switch signal. If the BLON signal is not readily available on an integrated board, it can often be found on the back of the board. If BLON cannot be located, connect the blue wire to a 5V source (e.g., from a USB port).
    • Connect the black wire to ground (GND).
  2. Method 2 (Using separate red and yellow wires for input):

    • Connect the red line to the motherboard's output, providing 12V to 200V DC.
    • Connect the yellow line to a 12V DC power source.
    • Connect the blue line to the power on/off signal (BLON).
    • Connect the black line to ground (GND).

4.2 Output Connection to LED Strip

  • Connect the positive red wire from the driver board's output to the positive output of the LED lamp strip.
  • Connect the negative output from the driver board to the negative pole of the LED light strip.
  • If connecting multiple sets of light strips, ensure all connections are correct before powering on.

4.3 Important Considerations

  • If the input voltage is 12V, the voltage of the connected light strip should not exceed 100V.
  • If the input voltage is 24V, the voltage of the connected light strip should not exceed 200V.
  • Avoid operating the board under overload conditions to ensure its durability and longevity.

5. Operation

Once correctly installed and powered, the YS-DZ-3.1 driver board will automatically regulate its output voltage to match the requirements of the connected LED light strip. This ensures a stable and appropriate power supply for your TV's backlight.

5.1 Brightness Adjustment

If the TV image appears dim after powering on, the brightness can be adjusted using the designated pads on the booster board. These pads are typically labeled J1, J2, J3, J4, and J5.

  • To increase brightness: Shortening the welding points of J1 can increase the brightness. Short circuiting J2 will also increase brightness.
  • Adjust other pads (J3, J4, J5) by analogy to achieve the appropriate brightness level for your display.

6. Maintenance

To ensure the long-term reliability and performance of your YS-DZ-3.1 driver board, follow these general maintenance guidelines:

  • Avoid Overload: Do not operate the board with LED strips that demand power beyond its specified output capabilities. Refer to the specifications section for voltage and current limits.
  • Cleanliness: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning if necessary.
  • Proper Ventilation: Ensure adequate airflow around the board to prevent overheating, especially during extended operation.
  • Secure Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.

7. Troubleshooting

This section provides solutions to common issues you might encounter with the YS-DZ-3.1 driver board.

Problem Possible Cause Solution
TV image is dim after power on Incorrect brightness setting or default low brightness. Adjust brightness by shortening the welding points on the J1/J2/J3/J4/J5 pads on the booster board. Shortening J1 or J2 typically increases brightness.
Board not functioning / LED strip not lighting up Incorrect wiring, insufficient input voltage, or BLON signal issue. Verify all wiring connections according to Section 4. Ensure input voltage is within 12-200V range. Check BLON signal connection (try 5V from USB if unsure).
Board becomes hot or fails prematurely Overload condition (LED strip voltage too high for input voltage). Ensure the LED strip voltage does not exceed 100V for 12V input or 200V for 24V input. Avoid operating under overload to prevent damage.

8. User Tips

  • This driver board is known for being efficient and performing very well when installed correctly.
  • Always double-check your wiring against the provided diagrams before applying power to prevent damage to the board or your TV.
  • For non-visual users, a detailed PDF user manual is available for download. Download User Manual (PDF)

9. Frequently Asked Questions (FAQ)

Q: How is this item supposed to be used?
A: This item is designed to be applied as a constant current driver board for LCD TV backlights and LED TV monitors, providing the necessary power regulation for the LED strips.

10. Package Contents

The package typically includes:

  • 1x YS-DZ-3.1 Drive Board
  • 2x Connecting Cables
Contents of the product package: drive board and two cables

Figure 5: The YS-DZ-3.1 drive board along with the included connecting cables.

11. Warranty and Support

For any technical assistance or warranty inquiries, please contact the seller or manufacturer directly. Ensure you have your purchase details and product model number (YS-DZ-3.1) ready when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.