DIANQI 16mm19mm22mm with socket

Contents

DIANQI Metal Push Button Switch Instruction Manual

Models: 16mm, 19mm, 22mm with Connector

1. Product Overview

This DIANQI metal push button switch is an electronic component designed for controlling the on/off state of circuits. It features simple operation, stable performance, and is built for high reliability, long lifespan, and good safety performance. It is widely applicable in various fields such as industrial automation, mechanical equipment, household appliances, automotive (car, motorcycle), and home lighting systems.

2. Specifications

FeatureDetail
Mounting Hole Size16mm, 19mm, 22mm
Switch TypePush Button Switch
Operation TypeMomentary (Self-reset) or Latching (Self-lock)
Contact Configuration1 Normally Open (NO) and 1 Normally Closed (NC)
Terminal Type5 Pins terminal (with connector)
LED Colors AvailableRed, Green, Yellow, Blue, White
LED Voltage Options3-6V (suitable for 3V, 5V, 6V), 12-24V (suitable for 12V, 24V), 110-220V
Crust MaterialBrass nickel plating / Oxidized aluminum black
IP Protection GradeIP65 (Dust tight and protected against water jets)
Rated Current3A
Switch Rating2A/36VDC
CertificationsCCC, RoHS, CE
Package Dimensions (approx.)Length: 4cm, Width: 4cm, Height: 5cm
Package Weight (approx.)0.04 kg

Dimensions

Refer to the diagram below for detailed dimensions of the 16mm, 19mm, and 22mm switches.

Dimensions for 16mm, 19mm, and 22mm push button switches

Image: Detailed dimensions for 16mm, 19mm, and 22mm switches, including mounting hole size and overall length.

3. Installation

3.1. Mounting

Ensure the mounting hole size matches your selected switch (16mm, 19mm, or 22mm). The installation location should be easily accessible for operation and protected from physical impact or compression from external objects.

3.2. Wiring

The switch features a 5-pin terminal with a connector for easy wiring. The LED terminal does not distinguish between positive and negative polarity.

Pin Terminal Arrangement and Contact Types

Image: Diagram illustrating the pin terminal arrangement (NC, NO, C, LED terminals) and internal contact types (Normal Closed, Normal Open, Common).

The switch includes NC (Normally Closed) and NO (Normally Open) contacts, along with a Common (C) contact. The LED terminals are separate and can be wired without concern for polarity.

3.3. Wiring Diagrams for Different Scenarios

Below are various wiring diagrams to achieve different circuit behaviors:

Detailed Wiring Diagrams for Push Button Switch

Image: Detailed wiring diagrams for various configurations, including momentary and latching operations, and how to wire the LED with the switch function.

  1. Wiring Diagram 1 (Light NOT Working, Switch Open): When the button is pressed, the light works, and the switch closes.
  2. Wiring Diagram 2 (Light Working, Switch Open): When the button is pressed, the light works, and the switch closes.
  3. Wiring Diagram 3 (Light Working, Switch Closed): When the button is pressed, the light does not work, and the switch opens.
  4. Wiring Diagram 4 (Light Working, Switch Closed): When the button is pressed, the light works, and the switch opens.

4. Operation

This push button switch is available in two main operational types:

  • Momentary (Self-reset): When you press the button, the switch activates (changes state). Upon releasing the button, it automatically returns to its original position, and the switch deactivates (returns to its initial state).
  • Latching (Self-lock): When you press the button, the switch activates and remains in that state. To deactivate, you must press the button again, which will release the lock and return the switch to its original state.

Ensure you have selected the correct operation type for your application.

5. Maintenance

To ensure optimal performance and longevity of your push button switch, observe the following maintenance guidelines:

  • Environmental Conditions: Avoid installing or operating the switch in harsh environments characterized by high humidity, excessive dust, or extreme temperatures (both high and low).
  • Humidity: High humidity can lead to short circuits or corrosion within the switch, compromising its functionality.
  • Temperature: Extreme temperatures can negatively affect the switch's performance and significantly reduce its service life.
  • Physical Protection: Ensure the switch is installed in a location where it is protected from collision and compression by other objects.
  • Cleaning: For general cleaning, use a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the switch's material or finish.

6. Troubleshooting

Most issues related to the push button switch stem from incorrect electrical parameters or environmental factors. Consider the following:

  • Incorrect Voltage/Current: Always confirm that the rated voltage, current, and power of the switch match the actual requirements of your circuit. Using the switch with a voltage exceeding its rated value can cause damage, short circuits, burning, or even fire.
  • Poor Electrical Connection: Ensure all connections are secure and that the contact resistance and insulation resistance are within acceptable limits to guarantee good electrical connection and insulation performance.
  • Environmental Factors: If the switch malfunctions, check if it has been exposed to excessive humidity, dust, or extreme temperatures, which can impair its function.
  • Physical Damage: Inspect the switch for any signs of physical damage, such as bent terminals or a stuck button, which might affect its operation.

7. User Tips

  • Size Verification: Before purchase and installation, double-check that the selected switch size (16mm, 19mm, or 22mm) is appropriate for your application's mounting hole.
  • Durability: Users frequently commend the product for its solid build and excellent quality, indicating good long-term reliability.

8. Frequently Asked Questions (FAQ)

Q: What does 1NO1NC mean?
A: 1NO1NC refers to the contact configuration: one Normally Open contact and one Normally Closed contact. This allows for flexible control over a circuit, where one circuit closes while another opens, or vice-versa, when the button is actuated.
Q: Can I use this switch outdoors?
A: The switch has an IP65 rating, meaning it is dust-tight and protected against low-pressure water jets from any direction. While it offers good protection against environmental elements, prolonged exposure to heavy rain or submersion is not recommended.
Q: How do I know if my switch is Momentary or Latching?
A: A Momentary switch will return to its original position immediately after you release it. A Latching switch will stay in the pressed position until you press it again to release it. This is typically specified at the time of purchase.
Q: Is the LED always on?
A: The LED's behavior depends on how it is wired. It can be wired to be always on, only on when the switch is activated, or off when the switch is activated. Refer to the wiring diagrams in the Installation section for different configurations.

9. Warranty & Support

For any technical assistance, troubleshooting, or inquiries regarding your DIANQI push button switch, please contact the seller or manufacturer directly. While specific warranty details are not provided in this manual, general product support is available.

You can also refer to the official user manual PDF for additional details: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.