IKSLED PIR Sensor Switch

Contents

IKSLED Mini PIR Motion Sensor Switch User Manual

DC 3.7V to 24V Pyroelectric Infrared Motion Human Sensor Automatic Detector Module for LED Strip

1. Introduction

The IKSLED Mini PIR Motion Sensor Switch is designed to automatically detect human motion using pyroelectric infrared technology. It is ideal for controlling LED strips and other low-voltage lighting applications, providing convenience and energy efficiency by turning lights on when motion is detected and off after a set delay.

Mini PIR Sensor Switch product image
Figure 1: IKSLED Mini PIR Motion Sensor Switch

2. Safety Information

  • Ensure the power supply voltage matches the sensor's specifications (3.7V-24V DC).
  • Do not use induction switches to control motors, solenoid valves, solar lights, constant current lamps, or other high-power/inductive equipment.
  • Always disconnect power before installation or troubleshooting.
  • Keep the sensor away from moisture and extreme temperatures.

3. Package Contents

Your package should contain the following:

  • Mini PIR Motion Sensor Switch (Probe extend, Probe bend, or Probe vertical variant)
  • Basic wiring instructions (may be on packaging)
Different probe types of the Mini PIR Sensor
Figure 2: Available probe types (Extend, Bend, Vertical)

4. Specifications

Attribute Value
Brand Name IKSLED
Model Number PIR Sensor Switch
Item Type SWITCHES
Switch Type Sensor Switch
Material Plastic
Voltage DC 3.7V - 24V (also compatible with 3V, 5V, 12V)
Current 3A
Max Wattage (Voltage dependent)
  • 3V: >5W
  • 3.7V: >7W
  • 5V: >12W
  • 12V: >36W
  • 24V: >48W
Induction Delay Time 30 seconds (infinitely extended if active within sensing area)
Sensing Distance 0-6 meters (affected by ambient temperature)
Working Mode All day
Certification CCC, CE
Is Smart Device No
Origin Mainland China

5. Setup and Wiring

Please connect the wires as described in the wiring diagram below. Ensure correct polarity and voltage for both the power source and the LED light.

Wiring example of PIR sensor switch with battery and LED light
Figure 3: Basic Wiring Example (Note: Voltage not lower than 2.7V)
Product packaging showing wiring diagram and specifications
Figure 4: Wiring Diagram and Specifications on Packaging

Wiring Instructions:

  • LED-: Connect to the negative terminal of your LED light.
  • LED+: Connect to the positive terminal of your LED light.
  • Power+: Connect to the positive terminal of your DC power source (3.7V-24V).
  • Power-: Connect to the negative terminal of your DC power source.

Ensure all connections are secure and insulated to prevent short circuits.

6. Operating Instructions

The PIR motion sensor switch operates by detecting infrared radiation emitted by moving bodies. When a person is detected within the sensing area, the connected LED light will turn on.

  • Induction Delay: After a person is detected, the light will remain on for approximately 30 seconds.
  • Continuous Activity: If a person remains active within the sensing area, the delay time will be continuously reset, keeping the light on. The light will only turn off 30 seconds after the last detected motion.
  • Sensing Distance: The sensor can detect motion within a range of 0-6 meters. This distance can be influenced by environmental factors such as temperature.
  • Working Mode: The sensor is designed for 'all day' operation, meaning it will activate regardless of ambient light levels.
Video 1: Demonstration of PIR sensor switch activating LED lights.

7. Maintenance

  • Keep the sensor lens clean and free from dust or obstructions to ensure optimal performance.
  • Avoid placing the sensor near heat sources or in direct sunlight, as this can affect its detection capabilities.
  • Do not expose the sensor to water or excessive humidity.

8. Troubleshooting

If, after connecting the wires, the light remains on or off and the switch cannot control it, there are three common reasons and their resolutions:

  1. Mismatch of Working Voltage

    Resolution: First, confirm that your adapter provides a constant voltage (e.g., DC 3.7V, 5V, 12V, 24V) and that your LED light is compatible with the same voltage (e.g., DC 3V, 3.7V, 5V, 12V, 24V). Ensure both components operate at the same voltage.

  2. Input/Output and Positive/Negative Poles are Reversed

    Resolution: Check if the input/output and positive/negative poles are connected in reverse. If they are, please correct the connections according to the wiring diagram.

  3. The Switch is Not Fixed or Moves During Use

    Resolution: If the switch is not fixed and moves during use, it may constantly re-check the environment, leading to erratic behavior. Turn off the power, securely fix the induction switch in place, and then resume use.

User Tips:

  • The power consumption in the waiting state is very low, making it suitable for battery-powered applications.
  • Some users have reported that at lower voltages (e.g., 3.7V), the sensor might not reliably turn off. If experiencing this, consider using a 12V power supply for more consistent operation.
  • This product is excellent for controlling lights based on motion, contributing to energy efficiency and convenience in various settings.

9. Warranty and Support

This product comes with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the manufacturer directly.

A user manual in PDF format is available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.