SUGON 8610DX Pro

Contents

SUGON 8610DX Pro 1000W Hot Air Rework Station

User Instruction Manual

1. Safety Precautions

Please read and understand all safety instructions before operating the SUGON 8610DX Pro Hot Air Rework Station. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Proper Use: Use this de-soldering station strictly according to this instruction manual. Do not use it for any unspecified purposes.
  • High Temperature Warning: The air outlet and surrounding areas become extremely hot during operation. Exercise extreme caution to avoid burns.
  • Handle Placement: When not in use, always place the handle correctly on its designated rack. Never place it directly on the workbench or any other surface.
  • Cool Down Procedure: After use, allow the station to cool down below 100°C (it will enter sleep mode) before turning off the power switch.
  • Air Outlet Clearance: Ensure the air outlet remains unblocked at all times. Clear any obstructions immediately.
  • Hose Protection: Do not place sharp objects on the air outlet hose to prevent damage.
  • Working Distance: Maintain a minimum distance of 2mm between the air outlet and the target item during operation.
  • Nozzle Selection: Different wind nozzles may result in slightly different temperatures. Select the appropriate nozzle for your application.
  • Power Disconnection: Unplug the power cord if the station will not be used for an extended period.
  • Careful Handling: Handle the station with care. Avoid tapping the handle or violently shaking the unit.
  • Regular Inspection: Periodically check and maintain the station. Do not use if damaged, especially if the power cable or air gun handle wire is compromised.
  • Environmental Conditions: Do not use the station in wet conditions or with wet hands to prevent short circuits or electric shocks. Do not use near flammable gases or other combustible substances.
  • Combustible Surfaces: Be aware that walls, ceilings, floors, or other surfaces may contain combustible materials. When working in such areas, continuously move the hot air de-soldering handle back and forth. Lingering or pausing the handle in one spot can ignite combustible materials.
  • Child Safety: Keep the station out of reach of children. Do not allow children to approach or touch the station.

2. Product Features

  • Customizable Channels: Features CH1, CH2, CH3, and CH4 working channels, each allowing independent storage of air volume and temperature settings.
  • Protection Functions: Equipped with multiple protection features and comprehensive key functions for safe operation.
  • Real-time Operation: Magnetic switch control automatically puts the handle into hibernation when placed on its holder.
  • Automatic Sleep Mode: Parameters can be adjusted even when the unit is in sleep mode.
  • Precise Temperature Control: Sensor closed-loop, microcomputer zero-trigger temperature control ensures rapid heating, high power, and stable, accurate temperature adjustments unaffected by air volume.
  • Brushless Vortex Fan: Adjustable air flow with a wide range, suitable for various applications.
  • Automatic Cooling: The system includes an automatic large air volume cooling function to extend the heating element's lifespan and protect the hot air handle.
  • Integrated Plug-in Handle: New design offers more stable and faster thermal conduction, significantly extending the life of the air gun handle.

3. Product Overview and Components

The SUGON 8610DX Pro is a high-performance hot air rework station designed for precision soldering and de-soldering tasks.

SUGON 8610DX Pro Rework Station with accessories

Figure 1: SUGON 8610DX Pro Rework Station with included accessories (handle stand, various nozzles, ground wire).

Control Panel Layout

Control panel showing 4 customizable memory channels

Figure 2: Close-up of the control panel. It features a digital display for temperature and air volume, and dedicated buttons for CH1, CH2, CH3, CH4 memory channels, temperature adjustment (TEMP ▲/▼), and air volume adjustment (AIR ▲/▼).

  • Digital Display: Shows current and set temperature, and air volume level.
  • Temperature Buttons (TEMP ▲/▼): Adjusts the hot air temperature.
  • Air Volume Buttons (AIR ▲/▼): Adjusts the air flow rate.
  • Channel Buttons (CH1, CH2, CH3, CH4): Used to store and recall preset temperature and air volume settings.
  • Power Switch: Turns the unit on/off.
  • Handle Stand: Provides a safe place to rest the hot air gun handle when not in use, triggering hibernation mode.

Hot Air Gun Handle and Nozzles

Diagram showing up to 8 airgun nozzles

Figure 3: The hot air gun handle features an integrated plug-in design for quick nozzle changes. A variety of nozzles are included, ranging from 0.19 inch (5mm) to 0.47 inch (12mm) for different applications.

4. Setup Instructions

4.1 Initial Setup

  1. Unpack the de-soldering station and check for any missing or damaged parts against the packing list. If any issues are found, contact your supplier.
  2. Place the de-soldering station on a stable, flat, and heat-resistant workbench.
  3. Ensure the handle stand is securely placed and accessible.
  4. Connect the power cord to the station and then to a suitable power outlet (110V or 220V depending on your model).

4.2 Nozzle Installation

Proper nozzle installation is crucial for effective and safe operation.

Three-step visual guide on how to correctly install a nozzle

Figure 4: Visual guide for nozzle installation.

  1. Ensure Safety: Turn off the power to the station and wait for the steel pipe of the handle to cool down completely before handling.
  2. Insert Nozzle: Select the desired air nozzle. Insert the nozzle into the steel pipe of the handle and press down firmly until it is securely seated.
  3. Verify Installation: Ensure the nozzle is stable and does not wobble.

5. Operating Instructions

5.1 Power On/Off

  1. Turn on the main power switch located on the front panel. The display will illuminate.
  2. Remove the handle from its holder. The system will enter normal working state, and the display will show the set temperature and actual temperature.
  3. To power off, place the handle back into its holder. The station will automatically enter cold air cooling mode. Once the temperature drops below 100°C, it will enter sleep mode. You can then turn off the main power switch.

5.2 Temperature and Air Volume Settings

The station allows precise adjustment of both temperature and air volume.

Rework station in use, showing adjustable air volume and temperature

Figure 5: The station in operation, demonstrating adjustable temperature (100°C-500°C) and air volume (1-120 levels).

Temperature Adjustment

  • Increase Temperature: Press the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.