Introduction
Thank you for purchasing the NieNie Digital Weather Clock. This device combines a clock, alarm, calendar, temperature, humidity, and weather forecast display with a convenient voice-activated backlight. Please read this manual carefully to ensure proper use and maintenance of your new device.

Figure 1: NieNie Digital Weather Clock Front View
Main Functions
- Time Display (12/24H format)
- Alarm Clock with Snooze
- Perpetual Calendar (2001-2099)
- Temperature Display (°C/°F)
- Humidity Display
- Weather Forecast Icons
- Voice-Activated Backlighting
- Max/Min Temperature and Humidity Records

Figure 2: Overview of Main Functions
Setup
Package Contents
- NieNie Digital Weather Clock
- USB Power Cable
- Detachable Stand
Powering the Device
Your clock can be powered by batteries or via the included USB cable.
- Battery Installation:
a. Gently remove the detachable stand from the back of the clock.
b. Open the battery compartment cover.
c. Insert 2 x AAA batteries (not included), ensuring correct polarity (+/-).
d. Close the battery compartment cover.
e. Reattach the stand.
Note: When powered by batteries, the backlight will turn off after 5-10 seconds to conserve power. - USB Power:
a. Connect the small end of the USB power cable to the DC4.5V Power Port on the back of the clock.
b. Connect the other end of the USB cable to a USB power adapter (not included) or a USB port on a computer.
Note: For continuous backlight display, it is recommended to use USB power.

Figure 3: Back Panel Layout
Video 1: Unboxing and Initial Setup Demonstration
Operating Instructions
Button Functions
- MODE: Cycles through display modes (Time, Calendar, Alarm) and enters setting modes.
- ▲12/24 (UP): Adjusts values upwards in setting modes; switches between 12-hour and 24-hour time format.
- ▼°C/°F (DOWN): Adjusts values downwards in setting modes; switches between Celsius and Fahrenheit temperature units.
- MAX/MIN: Displays maximum and minimum recorded temperature and humidity.
- SNZ (Snooze): Activates snooze function for the alarm; also activates backlight.
- SNOOZE/LIGHT (Back of clock): Activates backlight; also functions as snooze.
- Sound Control OFF/ON (Back of clock): Toggles voice-activated backlight feature.
- RESET (Back of clock): Resets all settings to factory defaults.

Figure 4: Front Display and Button Labels
Setting the Time
- From the time display, press and hold the MODE button for 3 seconds. The hour digits will start flashing.
- Use the ▲12/24 or ▼°C/°F buttons to adjust the hour.
- Press MODE again. The minute digits will start flashing.
- Use the ▲12/24 or ▼°C/°F buttons to adjust the minutes.
- Press MODE to confirm and exit time setting.
Setting the Calendar
- From the time display, press the MODE button twice. The month digits will start flashing.
- Use the ▲12/24 or ▼°C/°F buttons to adjust the month.
- Press MODE again. The day digits will start flashing.
- Use the ▲12/24 or ▼°C/°F buttons to adjust the day.
- Press MODE again. The year digits will start flashing.
- Use the ▲12/24 or ▼°C/°F buttons to adjust the year.
- Press MODE to confirm and exit calendar setting.
Setting the Alarm
- From the time display, press the MODE button three times. The alarm time will be displayed.
- Press and hold the MODE button for 3 seconds. The alarm hour digits will start flashing.
- Use the ▲12/24 or ▼°C/°F buttons to adjust the alarm hour.
- Press MODE again. The alarm minute digits will start flashing.
- Use the ▲12/24 or ▼°C/°F buttons to adjust the alarm minutes.
- Press MODE to confirm. The alarm ON/OFF indicator will flash.
- Use the ▲12/24 or ▼°C/°F buttons to turn the alarm ON or OFF.
- Press MODE to confirm and exit alarm setting.
Alarm and Snooze Function
- When the alarm rings, press the SNZ button (or SNOOZE/LIGHT button on the back) to activate the snooze function. The alarm will sound again after 5 minutes.
- To stop the alarm completely, press any other button (MODE, ▲12/24, ▼°C/°F, MAX/MIN).
Temperature and Humidity Display
- Switching Units: Press the ▼°C/°F button to toggle between Celsius (°C) and Fahrenheit (°F).
- Max/Min Records: Press the MAX/MIN button once to view the maximum recorded temperature and humidity. Press it again to view the minimum recorded temperature and humidity.
Voice-Activated Backlight
- Ensure the