Hongwin Knock Sensor 8200680689

Contents

Hongwin Knock Sensor User Manual

Model: Knock Sensor 8200680689

1. Product Overview

This manual provides instructions for the Hongwin Knock Sensor, designed for various vehicle models including Renault, Nissan, Suzuki, Dacia, Opel, and Vauxhall. The knock sensor is a critical component in your vehicle's engine management system, detecting engine knocking or pinging and sending signals to the Engine Control Unit (ECU) to adjust ignition timing, optimizing engine performance and preventing damage.

Hongwin Knock Sensor in retail packaging
Figure 1: Hongwin Knock Sensor in its retail packaging, showing part number 8200680689 and a 2-pin connector.

2. Safety Information

  • Always disconnect the vehicle's battery before performing any electrical work.
  • Ensure the engine is cool before attempting installation or removal of components.
  • Wear appropriate personal protective equipment (PPE), such as gloves and eye protection.
  • Consult a professional mechanic if you are unsure about any installation steps.

3. Installation Guide

The knock sensor is typically located on the engine block. Refer to your vehicle's specific service manual for the exact location and torque specifications.

3.1 Pre-Installation Checks

  • Verify that the new knock sensor matches the original part in terms of physical dimensions and connector type.
  • Ensure the mounting surface on the engine block is clean and free from oil, dirt, or debris.

3.2 Installation Steps

  1. Locate the existing knock sensor on the engine block.
  2. Carefully disconnect the electrical connector from the old sensor.
  3. Using an appropriate wrench (size 24mm, as indicated in Figure 2), remove the old knock sensor.
  4. Clean the sensor mounting hole and surrounding area thoroughly.
  5. Install the new Hongwin Knock Sensor. Ensure it is hand-tightened first, then torque to the manufacturer's specified value (typically found in your vehicle's service manual). Overtightening or undertightening can affect sensor performance.
  6. Connect the 2-pin electrical connector to the new sensor, ensuring a secure connection.
  7. Reconnect the vehicle's battery.
  8. Start the engine and check for any diagnostic trouble codes (DTCs).
Technical diagram of knock sensor with dimensions
Figure 2: Technical diagram showing key dimensions (e.g., wrench size 24mm, thread M12 x 1.25) and the 2-pin connector configuration.
Close-up of 2-pin connector
Figure 3: Detailed view of the 2-pin electrical connector on the knock sensor.

4. Operation

Once installed, the Hongwin Knock Sensor operates automatically. It continuously monitors engine vibrations to detect abnormal combustion (knocking). Upon detection, it sends a signal to the ECU, which then adjusts the ignition timing to prevent engine damage and maintain optimal performance. No user intervention is required for its operation.

5. Maintenance

The Hongwin Knock Sensor is a sealed unit and requires no routine maintenance. Periodically inspect the sensor and its wiring for any signs of physical damage or corrosion. Ensure the electrical connector remains securely attached.

6. Troubleshooting

6.1 Common Issues and Solutions

ProblemPossible CauseSolution
Check Engine Light (CEL) with Knock Sensor DTCFaulty sensor, wiring issue, incorrect installation.Verify sensor connection, inspect wiring for damage, ensure proper torque during installation. If issues persist, test sensor or consult a professional.
Engine knocking/pinging persists after sensor replacementOther engine issues (e.g., fuel quality, carbon buildup), incorrect sensor type, ECU malfunction.Ensure correct sensor application, check fuel quality, diagnose other potential engine problems.

If you encounter persistent issues, it is recommended to consult a qualified automotive technician for diagnosis and repair.

7. Specifications

FeatureDetail
BrandHongwin
Sensor TypeMagnetic Induction / Magnetostrictive
Connector Type2-Pin
Thread SizeM12 x 1.25
Wrench Size24 mm
OEM Part Numbers7700866055, 2206000Q0B, 8200680689, 8200639103, 2206000Q0A, 2206000QAA, 22060BN700, 7700732262
Compatible VehiclesRenault (CLIO, ESPACE, FLUENCE, KANGOO, LAGUNA, MEGANE, MODUS, SAFRANE, SCENIC, THALIA, TRAFIC, TWINGO, VEL SATIS), Nissan, Suzuki, Dacia, Opel, Vauxhall (Specific models listed in the product description)
OriginMainland China
Package Dimensions (L x W x H)13 cm x 9 cm x 4 cm
Package Weight0.067 kg

For a detailed list of compatible vehicle models and engine types, please refer to the product's full description or the supplementary PDF user manual: User Manual (PDF).

Close-up of knock sensor with OEM STANDARD marking
Figure 4: Close-up view of the knock sensor body, indicating 'OEM STANDARD'.

8. Warranty and Support

The Hongwin Knock Sensor comes with a one-year guarantee from the date of purchase.

8.1 Manufacturer Contact Information

  • Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
  • Customer Service Email: inf@hwautoparts.com
  • Tel: 86-18005775583
  • Manufacturer Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China

8.2 EU Representative Contact Information

  • Representative: MJCM SARL
  • Representative Address: CN-78 avenue des Champs Elysees Office 326
  • Tel: 33-767213611
  • E-mail: mjcm190928@gmail.com

9. User Tips

  • Pre-Installation Check: Before installation, visually inspect the sensor for any damage. Ensure it matches the description and your vehicle's requirements.
  • Accuracy: The magnetic induction sensor type is designed for high accuracy in detecting engine knocking across compatible vehicle models.
  • Professional Installation: If you are not experienced with automotive repairs, consider professional installation to ensure correct fitment and function.

10. Packaging Disposal

Please dispose of packaging materials responsibly. Follow local guidelines for separating and depositing packaging elements in the sorting bin.

WARNING: To avoid danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.