1. Introduction
This manual provides detailed instructions for the safe and effective use of your VISHRT QWE-741 Industrial Endoscope Camera. This high-performance industrial endoscope features a high-definition color IPS screen, an ergonomic design for one-hand control, and supports photo and video recording. It is equipped with a built-in 2600mAh rechargeable lithium battery, offering up to 3 hours of continuous operation. The camera cable is replaceable, and various camera specifications (length, diameter, depth of field, and angle of view) are available to suit different inspection scenarios.

The VISHRT Industrial Endoscope Camera, highlighting its 4.3-inch IPS screen, autofocus, and 15m cable length option.
2. Safety and Maintenance
2.1 Safety Precautions
- Do not violently hit the camera head or pull the cable forcefully.
- When operating in environments with sharp protrusions, exercise caution to prevent scratching the probe's waterproof protective layer.
- The camera is not made of high-temperature resistant material. Ensure the engine or inspection area has cooled to normal temperature before use.
- This product is not suitable for individuals with limited physical or mental abilities.
2.2 Maintenance
- When not in use, keep the lens and the main unit clean and dry.
- Avoid contact with oil stains or other corrosive hazardous materials.
3. Product Overview
3.1 Package Contents
The standard package includes:
- Host (Main Unit)
- Camera Cable (various lengths and diameters available)
- Instruction Manual
- Accessories: Magnet, Hook, Side Mirror (Note: 3.9mm/dual camera models may not include a side mirror)
- Charging Cable
3.2 Key Features and Components
The endoscope features a split design, allowing for easy replacement of lenses and cables, which helps save costs and extends service life.

The split design of the endoscope unit, illustrating how the camera cable connects to the main display unit via a USB connector.
The main unit includes a 4.3-inch IPS screen for clear and vivid images.

The 4.3-inch IPS screen provides rich colors and sharp, vivid images.
Various lens diameters are available to suit different inspection needs:

Illustration of various endoscope lens diameters and configurations, including single, dual, triple, and autofocus options.
- Camera Interface: Connects the camera cable to the main unit.
- Rotate Button: Rotates the image on the screen.
- Photo/Video Button: Captures still images or starts/stops video recording.
- Back/Menu Button: Navigates back or accesses the menu.
- OK/Switch Button: Confirms selections or switches between cameras (for dual/triple lens models).
- Down/Zoom Out Button: Moves down in menus or zooms out.
- Power Button/LED Light Adjustment: Powers the device on/off and adjusts the brightness of the LED lights on the camera head.
- Up/Zoom In Button: Moves up in menus or zooms in.
- Battery Compartment Cover: Protects the detachable battery.
- TF Card Slot: For inserting a Micro-SD card to store photos and videos.
- Reset Button: For resetting the device.
- Charging Port: Type-C port for charging.
4. Setup
4.1 Charging the Device
Before first use, fully charge the endoscope. Use a 5V household charger that meets safety regulations. Fast charging is not supported. The device can be used while charging. If the device is not used for a long time, ensure it is charged at least once every 3 months to prevent irreparable damage from over-discharge.
4.2 Inserting the TF Card
To store photos and videos, a TF (Micro-SD) card is required. Ensure the device is powered off before inserting the TF card. Confirm the correct orientation of the TF card before inserting. Do not use excessive force to prevent damage to the card slot structure.

The TF card slot for storing photos and videos.
4.3 Connecting the Camera Cable
Connect the camera cable's USB connector to the camera interface on the main unit. Ensure a secure connection.
Video demonstrating the unboxing, connecting the camera cable, and initial power-on of the endoscope.
5. Operating Instructions
5.1 Powering On/Off
Press and hold the Power button to turn the device on or off.
5.2 Adjusting LED Brightness
While the device is on, short press the Power button to cycle through LED brightness levels.
5.3 Taking Photos and Recording Videos
- To take a photo: Press the Photo/Video button once.
- To record a video: Press and hold the Photo/Video button to start recording. Press and hold again to stop recording.
5.4 Viewing and Deleting Media
Press the Menu button, then select the gallery or video option. Use the OK button to select the file to be deleted. Long press the Menu button again to confirm deletion.
5.5 Zoom Function
Use the Up/Zoom In and Down/Zoom Out buttons to adjust the digital zoom level.
5.6 Image Rotation
Press the Rotate button to rotate the image displayed on the screen.
5.7 Waterproof Capability
The endoscope lens is waterproof, allowing it to be used in wet environments such as drains or pipes.

The waterproof lens allows for inspection in wet conditions.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | VISHRT |
| Model Number | QWE-741 |
| Screen Type | 4.3 Inch IPS |
| Screen Resolution (Pixels) | 480*272 |
| Camera Resolution | 1920*1080 (1080P) |
| Video Resolution | 1920*1080 (1080P) |
| Camera Diameter | 3.9mm/5.5mm/8mm/Autofocus 8mm (Dual/Triple options available) |
| Cable Length Options | 1m/2m/3.5m/5m/10m/15m |
| Viewing Angle | 70° |
| Front Camera Best Focal Length | 4-10cm (50-80mm from OCR) |
| Side Camera Best Focal Length | 2-6cm (20-50mm from OCR, for dual/triple camera) |
| Battery Capacity | 2600mAh |
| Working Time | About 3 hours |
| Charging Time | About 2 hours |
| Working Temperature | 0°-45°C |
| Wire Type | Hard Wire |
| Certification | CE, FCC, RoHS |
| Origin | Mainland China |
7. Troubleshooting
7.1 Product Does Not Show Pictures or Black Screen
Solution:
- Remove the camera connector and reassemble it securely.
- Restart the device.
7.2 Stuck on the Picture
Solution:
- Check whether the product has sufficient power.
- Restart the device.
- Reassemble the camera connector.
7.3 Imaging Picture Not Clear
Solution:
- Ensure the object you are inspecting is within the best imaging focal length (2cm-10cm).
- Clean the front of the camera lens with a clean alcohol cloth.
8. User Tips
- Waterproof Lens: The endoscope lens is waterproof, making it suitable for inspecting wet areas like pipes and drains.
- Optimal Focus: For the clearest images, ensure the object is within the recommended focal length of 4-10cm for the front camera and 2-6cm for the side camera.
- Regular Charging: To prolong battery life, charge the device at least once every three months, even if not in use.
9. Warranty and Support
For warranty information and technical support, please refer to the official product page or contact the seller directly. Keep your purchase receipt for any warranty claims.
10. Compliance Statement
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.