1. Introduction
This manual provides essential information for the safe and efficient use of your DATEIYOU Electronic Control Sewing Machine Light. Please read these instructions carefully before installation and operation, and retain for future reference.
2. Safety Warnings
- Voltage Compatibility: Always ensure that the correct voltage (5VDC, 12VDC, or 24VDC, depending on your model) is connected before use. Connecting an incorrect voltage can damage the device and pose a safety risk.
- Keep the light away from water and excessive moisture.
- Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.
- Ensure the light is securely mounted to prevent it from falling during operation.
3. Product Overview
The DATEIYOU Electronic Control Sewing Machine Light is designed to provide efficient illumination for various sewing applications. It comes in several styles and voltage options to suit different needs.
3.1 Available Styles and Dimensions
- U-model LED: 5V, lamp head approx. 4.3cm long, wire length 118cm.
- 6LED Model: 5V, 12V, or 24V (optional), lamp head approx. 4.5cm long, wire length 148cm.
- Touch Style: 5V, lamp head approx. 9.2cm long, hose length approx. 19cm, wire length 125cm.
- 20LED Model: 5V, lamp head approx. 7.5cm long, hose length approx. 17cm, wire length 130cm.
- 4LED Model: 5V, lamp head approx. 2.6cm long, wire length 119cm.
- 3LED Model: 5V or 12V (optional), lamp head approx. 2.1cm long, wire length 121cm.
- Roller Car Special (Two-color): 5V, lamp head approx. 4.2cm long, wire length 22cm.
- Roller Car Special (White Light): 5V, lamp head approx. 4.2cm long, wire length 22cm.
4. Setup Instructions
- Choose the Correct Model: Select the appropriate light model (e.g., U-model, 6LED, Touch style) and voltage (5V, 12V, or 24V) that matches your sewing machine's requirements.
- Mount the Light: Securely attach the light head to your sewing machine in a position that provides optimal illumination for your work area.
- Connect the Power: Plug the electric control plug into the corresponding port on your sewing machine or power source. Ensure the connection is firm.
Figure 9: Electric control plug. - Verify Voltage: Double-check that the voltage of the light matches the output voltage of your sewing machine or power adapter.
4.1 Setup Demonstration Video
Watch this video for a visual guide on connecting and setting up various models of the sewing machine light:
5. Operating Instructions
- Power On: Once connected, turn on your sewing machine or the power source. The light should illuminate.
- Adjust Position: For models with a flexible hose (e.g., Touch style, 20LED), adjust the light head to direct illumination precisely where needed on your work area.
- Touch Control (for Touch Style models): If you have a 'Touch style' model, gently touch the designated area on the lamp head to turn the light on or off.
6. Maintenance
- Cleaning: Wipe the light head and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, disconnect the light from the power source and store it in a dry, cool place.
- Bulb Replacement: The LED bulbs are integrated and not user-replaceable. If the LEDs fail, the entire unit may need replacement.
7. Troubleshooting
- Light does not turn on:
- Check if the power source is active.
- Ensure the electric control plug is securely connected.
- Verify that the light's voltage matches the power source's output.
- For 'Touch style' models, ensure you are touching the correct activation area.
- Light flickers:
- Check for loose connections.
- Ensure the voltage is stable and correct.
If problems persist, please refer to the Warranty and Support section.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | ILH-004FP |
| Brand Name | DATEIYOU |
| Light Source | LED bulbs |
| LED Wattage | 1-3W |
| LED Color Temperature | Coldwhite 6000-6500K |
| Input Voltage | 5VDC / 12VDC / 24VDC (model dependent) |
| Power Source | AC |
| Is Bulbs Included | Yes |
| Is Dimmable | No |
| Luminous Flux | <60 |
| Irradiation Distance | Within 0.3 meter for use |
| Lampshade Material | Metal, Aluminum |
| Use | Industrial |
| Package Dimensions (L x W x H) | 10cm x 10cm x 10cm |
| Package Weight | 0.1 kg |
| Certification | CE, CCC |
9. User Tips
- For optimal lighting, position the lamp head to avoid shadows on your work area.
- If your sewing machine has multiple power ports, ensure you use the one compatible with the light's voltage.
- Consider the length of the wire when choosing a mounting location to ensure it reaches the power source without strain.
10. Warranty and Support
This product comes with a 1-year warranty from the date of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller, IGNITE LIGHT OF HAPPINESS Store, through the platform where you purchased the product.
You can also refer to the official user manual PDF for additional details: View User Manual (PDF).