KLARUS HM3

Contents

KLARUS HM3 Super Lightweight Multifunction Headlamp User Manual

Model: HM3

1. Introduction

Thank you for choosing the KLARUS HM3 Super Lightweight Multifunction Headlamp. This manual provides essential information for the safe and effective use of your new headlamp. Please read it thoroughly before operation and retain it for future reference.

The KLARUS HM3 is designed for versatility and portability, offering powerful illumination in a compact, lightweight form factor suitable for hiking, camping, mountaineering, and various outdoor activities.

2. Package Contents

Please check the package for the following items:

  • KLARUS HM3 Headlamp Unit x 1
  • Micro-USB Charging Cable x 1
  • Headband x 1
  • Stainless Steel Clip x 1
  • User Manual x 1

3. Product Overview

The KLARUS HM3 headlamp features a compact design with a single control button and a Micro-USB charging port for convenience.

KLARUS HM3 Headlamp in black with headband
Figure 3.1: KLARUS HM3 Headlamp (Black) with Headband
Front view of KLARUS HM3 Headlamp unit
Figure 3.2: Front View of HM3 Headlamp Unit
Side view of KLARUS HM3 Headlamp showing Micro-USB charging port
Figure 3.3: Side View with Micro-USB Charging Port
KLARUS HM3 Headlamp unit with detachable clip
Figure 3.4: HM3 Headlamp Unit with Detachable Clip

4. Setup

4.1. Initial Charging

Before first use, it is recommended to fully charge your HM3 headlamp.

  1. Locate the Micro-USB charging port on the side of the headlamp unit.
  2. Connect the supplied Micro-USB cable to the headlamp and plug the other end into a USB power source (e.g., wall adapter, computer USB port, power bank, car charger).
  3. The charging indicator light will be Red while charging.
  4. The indicator light will turn Green when charging is complete.

4.2. Assembly

The HM3 headlamp can be used in multiple configurations:

  • Headlamp Mode: Attach the headlamp unit to the provided headband. Adjust the headband for a comfortable and secure fit.
  • Clip Mode: Use the integrated clip to attach the headlamp to a visor, backpack strap, or other suitable surfaces. The clip allows for 0-180° angle adjustment.

5. Operating Instructions

The HM3 headlamp features a single button for intuitive control of all functions.

Hand pressing the single control button on KLARUS HM3 headlamp
Figure 5.1: Single Button Control

5.1. Turn ON/OFF and Adjust Output

  1. To Turn ON: Single click the button. The light will turn on in High mode.
  2. To Cycle Modes: With the light ON, single click the button to cycle through modes: High > Medium > Low.
  3. To Turn OFF: From any mode, single click the button after 10 seconds of operation. If less than 10 seconds, it will cycle to the next mode.

5.2. One-Touch Turbo Mode

For instant maximum brightness:

  • From any mode (ON or OFF), press and hold the button for more than 3 seconds to enter Turbo mode.
  • Single click the button to turn OFF Turbo mode.

5.3. Red Flashing Signal Mode

For signaling during emergencies or to maintain night vision:

  • From any mode (ON or OFF), double click the button to enter Red Flashing Signal mode.
  • Single click the button to turn OFF Red Flashing Signal mode.
Person using KLARUS HM3 headlamp in red flashing mode for signaling
Figure 5.2: Red Flashing Mode in Use

5.4. Versatile Mounting Options

The innovative clip design allows for flexible lighting angles and positions:

  • Headlamp Mode: 0-90° angle adjustment.
  • Visor Mode: 90-180° angle adjustment.
  • Backpack Mode: 0-180° angle adjustment.
Diagram showing headlamp, visor, and backpack modes with angle adjustments
Figure 5.3: HM3 Multifunction Modes

6. Maintenance

  • Cleaning: Wipe the headlamp with a clean, soft cloth. Do not use abrasive cleaners or solvents.
  • Storage: For long-term storage, recharge the headlamp every three months to maintain battery health. Store in a cool, dry place away from direct sunlight and extreme temperatures.
  • Avoid Disassembly: Do not disassemble the product without authorization, as this may void the warranty and damage the headlamp.
  • Environmental Precautions: Keep the headlamp away from flammable materials, high temperatures, and high humidity. Do not immerse it in water without proper protection, despite its IPX5 rating (which protects against water jets, not submersion).
  • Eye Safety: Do not shine the light directly into human or animal eyes to prevent injury.

7. Troubleshooting

If you experience issues with your KLARUS HM3 headlamp, please refer to the following common solutions:

  • Light Does Not Turn On:
    • Ensure the headlamp is fully charged. Connect it to a power source and check the charging indicator.
    • Verify that the button is being pressed correctly according to the operating instructions.
  • Light Output is Dim or Flickering:
    • The battery may be low. Recharge the headlamp fully.
    • Ensure the lens is clean and free from dirt or debris.
  • Headlamp Does Not Charge:
    • Check the Micro-USB cable for damage and try a different cable if necessary.
    • Try a different USB power source.
    • Ensure the charging port is clean and free of obstructions.

If problems persist, please contact KLARUS customer support.

8. Specifications

General Specifications:

Dimension41.4mm x 34.8mm x 32.4mm
Bead Model6500-7500K
Optical Flux670lm (lumen)
Voltage2.8-4.2V
Recharging Current5V/0.5A
Waterproof RatingIPX5
Capacity200mAh
Weight27.3g (Excluding headlight zone)
Working Temperature-20~45°C

Performance Specifications:

ModeOutput (Lumen)Runtime (Hr.)Candela (Cdl)Beam Distance (M.)
Turbo67035m200090
High3001h20m100063
Medium1702h20m60050
Low405h35037
RedN/AN/AN/AN/A

Drop Resistance: 1 Meter

9. User Tips

  • Comfortable Wear: The HM3 is exceptionally lightweight (27g), allowing for extended wear without fatigue.
  • Versatility: Utilize the innovative clip design to switch between headlamp, visor, and backpack modes for optimal lighting in various situations.
  • Simple Operation: Master the single-button control for quick access to all modes, including instant Turbo and Red Flashing Signal.

10. Warranty and Support

10.1. Warranty Policy

  • 15-Day Exchange: Products showing defects under normal use within 15 days of the purchase date will be exchanged or replaced with a similar product without charge.
  • 1-Year Warranty: KLARUS will repair products free of charge (for issues arising from material or workmanship) within 1 year from the purchase date.
  • Limited Lifetime Warranty: Outside of the 1-year warranty period, the product may be repaired or replaced at the cost of the owner for parts and service.

Please retain your receipt and warranty card as proof of purchase for any warranty or repair requests.

10.2. Customer Support

For further assistance or warranty claims, please contact:

KLARUS Lighting Technology Co., Limited
Address: B/F, Building E, Longjing Industrial Park, Longgang District, Banlian St., Shenzhen, China
Zip Code: 518000
Telephone: +86-755-27700110 (or 400-631-0169)
Email: service@klaruslight.com
Website: www.klaruslight.com

You can also refer to the official user manual PDF for more detailed information: KLARUS HM3 User Manual (PDF)


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.