Product Description
The MOES smart switch supports the ZigBee protocol and is designed to replace traditional light switches, offering various control modes. It integrates with the Smart Life/Tuya APP, enabling multi-control connections with other smart switches. Features include adjustable backlight status (on/off) and relay settings. This switch is suitable for diverse decorative styles and aims to provide optimal value.
MOES ZigBee US Light Switch, demonstrating compatibility with Alexa and Google Assistant for voice control.
Safety Information & Warnings
Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician.
- Always turn off the power at the circuit breaker and test that power is off before wiring.
- Disconnect the power supply before installing or removing the device to avoid irreversible damage from electric current or unpredictable problems such as lamp flashing.
Key considerations for installation: Requires 2.4GHz Wi-Fi (not 5GHz), minimum power of 3W, not suitable for dimmer or 3-way switches, and requires a MOES Zigbee Hub (purchased separately).
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ZS-B-US |
| Power Source | AC |
| Voltage | 90-240V AC, 50/60Hz |
| Max. Current | 10A/Gang; Total 10A |
| Wireless Protocol | ZigBee 3.0 |
| Communication Method | Zigbee |
| Frequency Band | 2405~2480Hz |
| Maximum Radio Transmit Power | <+10dBm |
| Plug Type | US Plug |
| Certification | CE |
Detailed dimensions (117.8mm x 71.8mm x 33mm) and electrical specifications for the ZS-B-US Zigbee Smart Switch.
Package Contents
- Smart Switch x1
- User Manual x1
- Screw bag x1
Installation Guide
Pre-installation Notes:
- Make sure that the power at the circuit breaker is off before wiring.
- The wire colors indicated in this manual are the usual colors and may differ in some houses.
- Ensure the wire conductors are securely fastened to each wire.
- Ensure the Wi-Fi signal is steady and normally working before wiring.
- If you don't have any wiring experience, please call a professional electrician.
Step-by-Step Installation:
-
Turn off Power: Turn off the circuit breaker and use an electrical tester to confirm the power is off before wiring.
Attention: Disconnect the power supply before installing or removing the device to prevent damage.
-
Remove Old Switch: Carefully remove the old switch from the wall. Identify the Line/Load wires. Note that wire colors may vary from the manual.
Verify power is off: Remove the faceplate from the old switch and use an electrical tester to confirm no voltage. You may need to turn off more than one circuit breaker.
-
Document Wiring: Take pictures of the existing wiring before disconnecting anything. This will serve as a reference.
-
Prepare for Wiring: Remove the panel of the new switch with a screwdriver. Do not install with electricity power on.
-
Connect Wires: Follow the wiring diagram to connect the switch wires to the wires in the wall box using wire conductors.
- Live wire connects to the "L" terminal.
- Neutral wire connects to the "N" terminal.
- Lamp wire connects to "L1, L2, L3, L4" terminals.
- 1 Gang connects to "L1" terminal.
- 2 Gang connects to "L1, L2" terminals.
- 3 Gang connects to "L1, L2, L3" terminals.
- 4 Gang connects to "L1, L2, L3, L4" terminals.
Wiring options for the MOES Smart Switch, showing connections for both 'No Neutral Wire' and 'With Neutral Wire' setups, including Ground, Neutral, Load, and Line terminals.
-
Mount Switch: Put the switch into the switch box in the wall and mount it using the two side screws.
-
Install Glass Panel: Install the glass panel from the top down.
-
Finish Installation: Complete the physical installation.
Comparison illustrating how the MOES smart switch (single gang) occupies less space than a traditional multi-gang switch, ideal for limited space setups.
App Setup & Operation
1. Download the MOES APP
Download the "MOES" App from the App Store (iOS) or Google Play Store (Android), or scan the provided QR code.
The MOES App offers enhanced compatibility and features compared to Tuya Smart/Smart Life App, including Siri, widget, and scene recommendations. While Tuya Smart/Smart Life App still works, MOES App is highly recommended.
2. Registration or Login
- Open the "MOES" Application.
- Enter the Register/Login interface. Tap "Register" to create an account by entering your phone number to get a verification code and setting a password.
- Choose "Log in" if you already have a MOES account.
3. Connecting the APP to the Device
Ensure the device is within the effective signal coverage of your smart ZigBee gateway for successful connection into the ZigBee gateway in the MOES APP.
- Make sure your MOES APP has successfully connected to a Zigbee gateway.
- Enter the gateway in the app. Follow the on-screen instructions to "Add subdevice." Ensure the device's LED is blinking. The connection process may take 10-120 seconds depending on your network condition. If the LED is not blinking, reset the device by long-pressing the switch for 10 seconds until the indicator flashes fast.
- Once the device is successfully added, you can edit its name and enter the device page by clicking "Done."
- Click "Done" again to enter the device page and begin using your smart switch with home automation features.
Screenshot of the MOES app demonstrating remote control functionality for a smart light switch, including individual button control, timer settings, and all on/off options.
Multi-Control Association (for N+L wire)
This feature allows multiple smart switches to control a single light. Please ensure you have successfully added the primary switch to your MOES App before proceeding.
- Add another smart switch to the same MOES App. (If you have already added it, proceed to the next step.)
- In the app, you will see two devices. Click on the main switch (e.g., a one-gang switch) to enter its operation interface.
- Click the icon in the upper right corner and choose "Multi-Control Association." Then click "+" in the right corner.
- Choose the switch you want to associate and then select the specific switch button that will control the same light.
- Go back to the previous page. You will now see two items: your main switch and the newly associated switch. You can now control your light with both switches. Do not associate another button in the same switch for multi-control.
- To add a third or more smart switches to control your light, repeat the steps above. The app will display all associated switches.
Note:
- If your switch requires a neutral wire, there is no need to wire the newly added switch to the light; only Line (L) and Neutral (N) are required for wiring. You can then control one light with multiple switches in the MOES App.
- If your switch does not require a neutral wire, follow the wiring instructions to connect the Line (L) and light. At this point, you can control the lights simultaneously with multiple switches.
- Please confirm the associated switch is enabled.
Voice Control Integration
MOES smart switches are compatible with Amazon Alexa and Google Home for voice-controlled functionalities.
For a step-by-step guide on integrating your smart switch with voice assistants, please refer to the official MOES blog: https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker
User Tips
- **Zigbee Router Functionality:** While the product may appear to support Zigbee router functionality with a neutral connection, some users have reported that this feature is blocked at the firmware level, preventing the switches from acting as Zigbee routers in practice. Consider this limitation if you plan to use the switch to extend your Zigbee network.
Troubleshooting
- **Device not pairing:** Ensure the device's LED is blinking rapidly. If not, long-press the switch for 10 seconds to enter network connection mode.
- **No power to switch:** Verify that the circuit breaker is in the ON position and that all wiring connections are secure. Use an electrical tester to confirm power is present at the switch.
- **Wi-Fi connectivity issues:** Ensure your Wi-Fi network is 2.4GHz (5GHz is not supported) and that the signal is strong and stable in the switch's location.
- **Light not responding:** Check that the minimum power requirement of 3W for the light bulb is met. Ensure the switch is not being used with a dimmer or as part of a 3-way switch setup, as these are not supported.
- **Zigbee connection issues:** Confirm that a MOES Zigbee Hub is installed and functioning correctly, as it is required for Zigbee connectivity.
Warranty Information
Thank you for purchasing this product. We hope you enjoy using it.
Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer.
To exercise warranty rights, the purchaser must present:
- Warranty card.
- Proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase), unless the purchase date is indicated on the warranty card.
If product quality problems occur within 24 months from the date of receipt, prepare the product and packaging and return it to the place of purchase for after-sales maintenance. If the product is damaged due to personal reasons, a maintenance fee will be charged.
We recommend properly protecting the goods during delivery for warranty service. Use the original packaging with padding to ensure safe transportation. If using replacement packaging, ensure adequate protection from shipping damage. Consider placing a sticker indicating susceptibility to impact, such as "Warning Glass."
Reported defects covered by the warranty will be considered immediately and no later than 14 days from the date of delivery of the goods to the Guarantor.
After checking and determining the legality of the warranty claim, the Guarantor's services will repair the product within a reasonable time, not exceeding 30 days from the date of delivery. If hard-to-find spare parts are required, this deadline may extend.
The warranty does not include the performance of maintenance and similar operations specified in the user manual; users are obliged to perform these themselves.
If defects occur due to natural wear and tear during use, the warranty does not cover it.
The warranty does not cover:
- Mechanical damage caused by the user's fault and product defects caused by such damage.
- Damage caused by improper use of the product.
The rights under the guarantee will expire if:
- The warranty seal is removed from the product.
- The serial number is removed from the product.
- Actions are taken to eliminate physical defects in the product outside of authorized service.
- Non-original parts and consumables are used.
Recycling Information
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.
FR: Cet appareil, ses accessoires, se recyclent (À DÉPOSER EN MAGASIN OU EN DÉCHÈTERIE)
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Contact & Support
Manufacturer:
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
UK Representative:
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: contact@evatost.com
EC Representative:
AMZLAB GmbH
Laubenhof 23, ESSEN 45326
Email: info@amz-lab.de
Tel: +491745298066
Made In China
Additional Resources
A detailed user manual in PDF format is available for download. You can access it via the following link: