Product Description
The MOES Tuya ZigBee Smart Light Switch is designed to replace traditional light switches, offering various control modes and smart home integration. It supports the ZigBee protocol and can be connected with the Smart Life/Tuya APP for multi-control association with other smart switches. Features include backlight on/off status and relay control, making it suitable for diverse decorative styles and smart home setups.
Safety Warnings and Important Notes
Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are unsure about any part of these instructions, please seek professional assistance from a qualified electrician.
- Only 2.4GHz Wi-Fi is supported, not 5GHz.
- Minimum power for connected lights needs to be 3W.
- This switch cannot be used as a dimmer or a 3-way switch.
- A MOES Zigbee Hub is required for Zigbee connection and needs to be purchased separately.
- Always turn off the power at the circuit breaker and test that power is off before wiring.
- Ensure the wire conductors are securely fastened to each wire.
- Ensure the Wi-Fi signal is steady and normally working before wiring.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ZS-B-US |
| Voltage | 90-240V AC, 50/60Hz |
| Max. Current | 10A/Gang; Total 10A |
| Wireless Protocol | ZigBee 3.0 |
| Frequency Band | 2405~2480Hz |
| Maximum Radio Transmit Power | <+10dBm |
Package List
- Smart Switch ×1
- User Manual ×1
- Screw bag ×1
Installation Guide
Step 1: Power Off and Verify
- Turn off the circuit breaker for the switch you are replacing.
- Use an electrical tester to confirm that the power is completely off before proceeding.
Attention: Disconnect the power supply before installing or removing the device to prevent irreversible damage or unpredictable issues like lamp flashing.
Step 2: Remove Old Switch
- Carefully remove the old switch from the wall box.
- Identify the Line/Load wires. Note that wire colors may vary from standard diagrams.
- It is highly recommended to take pictures of your existing wiring before disconnecting anything. This will serve as a reference during the installation of the new smart switch.
Step 3: Prepare for Wiring
- Remove the front panel of the new smart switch using a screwdriver. (Ensure power is OFF).
- Prepare to connect the wires according to the wiring diagram.
Step 4: Wiring Connections
The MOES Smart Switch supports two wiring modes: with Neutral Wire and without Neutral Wire. Refer to the diagram below for correct connections.
- Live wire: Connects to the "L" terminal.
- Neutral wire: Connects to the "N" terminal (if applicable).
- Lamp wire (Load): Connects to the "L1", "L2", "L3", "L4" terminals depending on the number of gangs.
- 1 Gang: Connects to "L1" terminal.
- 2 Gang: Connects to "L1, L2" terminals.
- 3 Gang: Connects to "L1, L2, L3" terminals.
- 4 Gang: Connects to "L1, L2, L3, L4" terminals.
- Ground wire: Connect to the Ground terminal.
Step 5: Mount and Finish Installation
- Carefully put the wired switch into the switch box in the wall.
- Mount the two side screws to secure the switch.
- Install the glass panel by sliding it from the top.
- Finish the installation.
App Setup and Connection
1. Download the MOES App
The MOES App offers enhanced compatibility and features compared to the standard Tuya Smart/Smart Life App, including Siri, widget, and scene recommendations. While Tuya Smart/Smart Life App still works, MOES App is highly recommended.
Download the MOES App from your device's app store or scan the QR code below:
(Note: This image is a placeholder for the actual QR code from OCR page 8, which is not directly embeddable via URL. Please refer to the physical manual for the scannable QR code.)
2. Registration or Login
- Open the "MOES" Application.
- Enter the Register/Login interface. Tap "Register" to create an account by entering your phone number to get a verification code and set a password.
- If you already have a MOES account, choose "Log in".
3. Reset/Re-pair Wi-Fi Device
To put the switch into network connection mode, long press the switch for 10 seconds until the indicator on the switch flashes fast.
4. Connecting the App to the Device
Ensure your smart switch is within the effective signal coverage of your ZigBee gateway for successful connection to the MOES App.
- Make sure your MOES App has successfully connected to a Zigbee gateway.
- In the app, enter the gateway interface. Follow the on-screen instructions to "Add subdevice". The LED on the switch should be blinking. The connection process may take 10-120 seconds depending on your network condition.
- Once the device is successfully added, you can edit its name and enter the device page by clicking "Done".
- Click "Done" again to enter the device page and begin enjoying smart control and home automation.
Multi-Control Association (for N+L wire only)
This feature allows multiple smart switches to control the same light. Ensure you have successfully added the switches to your MOES App before proceeding.
- Add all smart switches you intend to use for multi-control to the same MOES App.
- In the app, you will see all added devices. Click on the main switch (e.g., a one-gang switch) to enter its operation interface.
- Click the icon in the upper right corner of the device interface and select "Multi-Control Association". Then click "+" in the right corner.
- Choose the switch you want to associate and then select the specific button on that switch that will control the same light.
- Go back to the previous page. You will now see your main switch and the newly associated switch listed.
- To add more switches for multi-control, repeat the steps above. The app will display all associated switches.
Note:
- If your switch requires a neutral wire, the newly added switch for multi-control does not need to be wired to the light; only Line and Neutral connections are required.
- If your switch does not require a neutral wire, follow the standard wiring instructions for Line and Load. You can then control the lights simultaneously with multiple switches.
- Do not associate another button within the same switch for multi-control.
Voice Control Integration
The MOES Smart Switch is compatible with Amazon Alexa and Google Home, allowing for convenient voice control of your lighting.
For detailed step-by-step guides on linking your smart switch with Alexa or Google Home, please refer to the official MOES website or the in-app instructions.
Example command: "Hey Alexa, turn on the light."
User Tips
- Zigbee Hub is Essential: Remember that a MOES Zigbee Hub is required for the smart switch to function. It is not included and must be purchased separately.
- Not for 3-Way or Dimmers: This switch is designed for single-pole applications and cannot be used in 3-way setups or with dimmable lights. Ensure your existing setup is compatible before installation.
- Stable Wi-Fi: A stable 2.4GHz Wi-Fi connection is crucial for initial setup and consistent performance. Ensure your router is broadcasting on this frequency and the signal is strong where the switch is installed.
Maintenance
- Keep the switch clean by wiping it with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Regularly check for firmware updates in the MOES App to ensure optimal performance and security.
Troubleshooting
- Switch not responding:
- Check if the circuit breaker is on.
- Ensure the switch is properly wired according to the diagrams.
- Verify that the Zigbee Hub is powered on and connected to your network.
- Try resetting the switch (long press for 10 seconds) and re-pairing it with the app.
- App connection issues:
- Confirm your Wi-Fi network is 2.4GHz and stable.
- Ensure your phone is connected to the same 2.4GHz Wi-Fi network during pairing.
- Restart your router and Zigbee Hub.
- Make sure the switch is in pairing mode (flashing indicator).
- Voice control not working:
- Verify that the MOES App is correctly linked to your Alexa or Google Home account.
- Check your internet connection.
- Ensure the device name in the MOES App matches the name used in your voice assistant.
Warranty and Support
Warranty Instructions
Products are covered by a 24-month warranty, effective from the date of purchase by a retail customer. To exercise warranty rights, the purchaser must present a warranty card and proof of purchase (VAT invoice, financial receipt, or other document confirming the actual date of purchase).
If product quality problems occur within 24 months from the date of receipt, please contact the place of purchase for after-sales maintenance. Damage due to personal reasons may incur a maintenance fee.
We recommend using the original packaging with padding for safe transportation if the product needs to be returned for service. If using replacement packaging, ensure adequate protection and consider marking the package with "Warning Glass".
The warranty does not cover:
- Mechanical damage caused by user fault or product defects resulting from such damage.
- Damage caused by improper use of the product.
- Defects due to natural wear and tear.
- Removal of warranty seals or serial numbers.
- Unauthorized repairs or use of non-original parts.
Recycling Information
All products marked with the WEEE symbol (Waste Electrical and Electronic Equipment Directive 2012/19/EU) must be disposed of separately from unsorted municipal waste. This ensures proper recycling and protection of human health and the environment. Contact your local authorities for designated collection points.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. If interference occurs, try reorienting the receiving antenna, increasing separation between equipment and receiver, or connecting the equipment to a different circuit outlet.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Contact Information
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After-sale Service: service@moeshouse.com
For an electronic version of this manual, please refer to the PDF available at: MOES Smart Switch User Manual (PDF)