Fccemc Car LED Ambient Light

Contents

Fccemc Car LED Ambient Light User Manual

USB 64 Colors Acrylic Strips with App & Remote Control

1. Product Overview

The Fccemc Car LED Ambient Light system provides customizable interior lighting for your vehicle. Featuring soft, flexible, and cuttable acrylic strips, it offers 64 colors, multiple modes, and control via a mobile application or an included remote control. The system is powered via a USB interface for easy, non-destructive installation.

Car interior with multi-color ambient LED strips installed, showing music notes and control options.

Figure 1: Car interior with multi-color ambient LED strips installed, showing music notes and control options.

2. Setup and Installation

The material of the lamp body is soft and can be cut, making it easy to install. Both the remote control and APP can control the lights.

Installation Steps:

  1. Step 1: Scan the QR code on the USB controller to download the mobile application.
  2. Step 2: Connect the USB to a power supply (e.g., car USB port, USB adapter) and test whether the light strip is functioning properly.
  3. Step 3: Insert the light strip into the desired installation gap in your car's interior. Use a scraper tool if needed to gently push the strip into crevices.
  4. Step 4: Open the downloaded app on your smartphone to pair with the device. After successful pairing, you can control the light through the app.
Diagram showing the components of the ambient light kit, installation steps, and mobile app functions.

Figure 2: Kit components, installation steps, and mobile app functions overview.

Important Notes:

  • The light strip is flexible and can be cropped to length. Be careful not to cut the lamp beads when cutting; the cut section will not be usable.
  • Ensure the USB power source provides stable 5V output.

3. Operating Instructions

Control your ambient lights using either the mobile application or the provided remote control.

Mobile App Functions:

The mobile app offers comprehensive control over your lighting system.

  • Scenes: Select from various pre-set lighting scenes.
  • Colorful: Access a full RGB color disc to choose any color arbitrarily. Customizable color blocks are available.
  • Rhythm: Activate music/microphone synchronization for dynamic lighting effects.
  • Schedule: Set timers for lights to turn on or off.
  • Settings: Adjust brightness, speed, and other parameters.
  • Multiple Modes: Utilize multiple preset seven-color changing modes with adjustable speed and brightness.
  • DIY Music Mode: Customize lighting modes that react to music or microphone input.

Remote Control:

The remote control provides quick access to basic functions such as power on/off, color selection, and mode changes.

USB Controller Button:

The USB controller itself has a short press button for On/Switch mode and a long press to Close (turn off).

Video 1: Demonstration of the Car LED Ambient Light in operation, showcasing various colors and app control.

4. Maintenance

  • Keep the light strips clean and free from dust. Wipe gently with a dry or slightly damp cloth if necessary.
  • Avoid exposing the USB controller or light strips to excessive moisture or extreme temperatures.
  • Do not use harsh chemicals or abrasive cleaners on the product.

5. Troubleshooting

Common Issues and Solutions:

  • Light strip not fully illuminated: This is often a matter of setting the number of lamp beads. Use your app to set it correctly.
  • Remote control not working: The remote control requires a CR2025-2032 button battery, which is not included due to shipping restrictions. Please ensure a fresh battery is installed correctly.
  • Light bar does not fit my car: The light bar is designed to fit all car models. Use a scraper and double-sided tape for installation.
  • Cannot connect multiple lights to one power source: In the case of simultaneous power, multiple lights can be combined on the mobile app for unified control.
  • No memory function: The system has a memory function. Whether turned off via the app or button, it will resume the previous mode when turned on again.

If you encounter any other problems during use, please contact customer support for assistance.

6. Specifications

Brand NameFccemc
Item TypeAtmosphere Lamp
Special FeaturesSound control
Voltage5V
MaterialAcrylic
Length Options35cm, 110cm, 140cm (available separately)
Control MethodsMobile App, Remote Control, USB Controller Button

7. User Tips

  • For optimal remote control functionality, ensure you have a fresh CR2025-2032 button battery installed.
  • When installing, use a plastic scraper tool to gently tuck the light strip into car interior gaps for a seamless look.
  • Experiment with the app's DIY Music Mode to create personalized light shows that sync with your car's audio.

8. Warranty and Support

For any product-related issues, technical support, or warranty claims, please contact the seller directly through your purchase platform. Provide your order details for faster service.

© 2023 Fccemc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.