1. Introduction
Thank you for choosing the CoBa CA-W001 COB LED Work Light. This versatile and durable work light is designed for various applications, including camping, repairing, and emergency situations. It features a powerful COB LED, rechargeable battery compatibility, strong magnetic base, rotatable hook, and multiple lighting modes to provide reliable illumination wherever you need it.

2. Package Contents
Please check the package for the following items:
- 1 x CoBa CA-W001 COB LED Work Light
- 1 x MicroUSB Charging Cable
- 1 x Color Box
- Note: 18650 lithium batteries may or may not be included depending on your purchase option. Please check your order details.

3. Setup
3.1 Battery Installation
- Open the battery compartment located at the rear of the light (refer to the parts diagram in Section 4.1).
- If your light did not come with batteries, ensure you use 18650 Pointed Head Batteries. Do NOT use 18650 Flat Head Batteries.
- Insert the battery correctly: the positive pole (+) should face down (towards the light head) and the negative pole (-) should face up (towards the battery compartment cover).
- Ensure there are no obstructions or debris on the battery contact points.
- Close the battery compartment securely.

3.2 Remove Battery Protection
Before first use, please remove any protective film or sticker from the battery terminals if present.
3.3 Initial Charging
For optimal performance and battery longevity, fully charge the work light before its first use.
4. Operating Instructions
4.1 Parts Overview

4.2 Powering On and Light Modes
The work light features a three-position switch:
- Switch Down (symbol '_'): Activates dim light mode.
- Switch Up (symbol '='): Activates strong light mode.
- Middle Position (symbol 'O'): Turns the flashlight off.
4.3 Charging the Work Light
- Locate the charging interface (9) on the side of the light. This model supports both MicroUSB and USB-C charging ports.
- Connect the provided MicroUSB cable (or a compatible USB-C cable) to the charging port and the other end to a 5V USB power source (e.g., wall adapter, computer USB port).
- During charging, the indicator light will flash continuously.
- When fully charged, the indicator light will turn off.
- Do not exceed 5V input during charging to prevent damage to the battery or light.
- Ensure the battery is fully inserted and making proper contact for charging to occur.

4.4 Using the Integrated Features
- Magnetic Base: The work light has strong magnets (6 & 7) on its tail and back, allowing it to be securely attached to metal surfaces for hands-free operation.
- Rotatable Hook: The hook (1) at the top of the light can rotate 360°, providing flexible hanging options.
- Rotatable Grip & Tail Clamp: The main grip (4) and tail clamp (5) can rotate up to 360° and 180° respectively, enabling you to direct the light precisely where needed.

5. Maintenance
5.1 Cleaning
Clean the flashlight with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the surface or internal components.
5.2 Battery Care and Storage
- If the flashlight will not be used for an extended period, remove the batteries to prevent leakage and damage.
- Always fully charge the battery before storing the flashlight for long periods.
- Do not wait for the battery to be completely empty before recharging, as this can shorten its lifespan.
- Avoid overcharging the batteries; use recommended chargers and disconnect once fully charged.
5.3 Temperature and Environment
- Protect the flashlight and batteries from extreme temperatures (excessive heat or cold), as these can affect battery autonomy and overall performance.
- The flashlight is waterproof for daily use (e.g., light rain), but it is not suitable for diving. Ensure all sealed parts are tightly closed when using it in damp conditions.
- Do not disassemble the flashlight in sandy or dusty weather conditions to prevent ingress of particles.
5.4 Periodic Inspection
Periodically check internal connections for any signs of rust or dirt. If necessary, lubricate the threads with silicone grease to maintain smooth operation and water resistance.
6. Troubleshooting
6.1 Charging Indicator Not Working
- The battery may be completely discharged. Wait at least 10 minutes for the indicator to light up after connecting to power.
- The charging cable or charging device may be damaged. Try a different cable or power source.
- The charging port may be dirty and requires cleaning.
- The battery itself may be damaged and need replacement.
- Ensure the charging cable is fully and correctly connected to both the light and the power source.
6.2 Flashlight Not Turning On or Emitting Weak Light
- Ensure the battery is correctly installed with the correct polarity.
- Check if the battery is sufficiently charged.
- Make sure the battery is fully inserted and making proper contact within the compartment.
- Clean the battery contacts inside the flashlight and on the battery itself.
6.3 Flashlight Overheating
This flashlight uses high-power LEDs and features a dust and water-resistant design. It is normal for the unit to become warm after prolonged use, especially on the strong light mode. If it becomes excessively hot, turn it off and allow it to cool down.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | CA-W001 |
| Lumen Output | 700LM |
| Switch Mode | High / Low |
| LED Type | COB |
| Beam Angle | 180° |
| Wattage | 80W |
| Light Source | LED bulbs |
| Certification | CCC |
| Battery Type | 2 x 18650 (Pointed Head, rechargeable) |
| Charging Interface | MicroUSB, USB-C |
| Dimensions (L x W x D) | 338mm x 66mm x 54mm (Head width: 57mm) |
| Use | Camping, Repairing, Emergency |
| Item Type | Portable Spotlight |

8. User Tips
- The magnets are strong and reliable for hands-free use on metal surfaces.
- The clamping feature in the handle can be very handy for securing the light in various positions.
- Appreciate the dual charging ports (MicroUSB and USB-C) for convenience.
- The mechanical switch (high/off/low) is straightforward and avoids unnecessary strobe or colored light modes.
- The ability to replace the 18650 batteries is a significant advantage for extending the product's lifespan and usage time.
9. Frequently Asked Questions (FAQ)
Q: I ordered lights with batteries but only received the lights. Are the batteries shipped separately?
A: Batteries may sometimes be shipped in a separate package due to shipping regulations or may not be included depending on the specific purchase option you selected. Please check your order details and tracking information for separate battery shipments. If you have further concerns, please contact the seller.
Q: Is the battery that you sell rechargeable?
A: Yes, the recommended 18650 batteries for this work light are rechargeable. Ensure you use 18650 Pointed Head rechargeable batteries.
10. Warranty and Support
This product is designed for durability and performance. Please note that disassembling or modifying the flashlight may void any applicable warranty. For any issues, questions, or support needs, please contact the seller directly through your purchase platform.