1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your PZSUNLY USB Rechargeable Motion Sensor LED Cabinet Light. This ultra-thin wireless sensor light features intelligent induction, turning on automatically when motion is detected, and offers adjustable light settings for various applications.
2. Package Contents
Ensure all the following items are included in your package:
- Cabinet Light
- Adhesive Fixing Clip
- USB Charging Cable
- User's Manual
3. Specifications
General Specifications
| Feature | Detail |
|---|---|
| Material | Aluminum |
| Voltage | 5V |
| Power Source | Rechargeable battery |
| Power Generation | Motion (PIR Motion Sensor) |
| Luminous Flux | <60 |
| Lifespan | 50000H |
| Dimmable | Yes (Stepless Dimming) |
| Bulbs Included | No (Integrated LEDs) |
| Smart Device | No |
| Installation Method | Self-contained (Magnetic attraction with adhesive clips) |
| Certifications | RoHS, FCC, CE |
Dimensions and Color Options
| Category | Options |
|---|---|
| Available Lengths | 20cm, 30cm, 40cm, 50cm |
| Exterior Light Color | Black, White |
| Luminous Color (3-in-1) | Warm Light (3000K), Neutral Light (4000K), White Light (6000K) |
| Approx. Package Dimensions (40cm model) | Length: 41cm, Width: 4cm, Height: 2cm |
| Approx. Package Weight | 0.157 kg |
4. Setup and Installation
The PZSUNLY Cabinet Light features a simple 3-step fixation method, requiring no complex wiring or drilling. The light attaches magnetically to adhesive clips.
- Prepare the Clips: Install the fixing clip onto the lamp. Adjust its position to approximately 1/3 from each end of the light for balanced support.
- Prepare the Surface: Ensure your desired installation surface is clean, dry, and smooth.
- Attach Clips: Remove the adhesive paper from the back of the fixed clip and firmly stick it to the target position on your surface.
- Mount the Light: The lamp body can then be magnetically attached to the fixed clips. The light can be easily removed and re-fixed at any time for charging or repositioning.
5. Operating Modes and Controls
The light offers multiple operating modes and adjustable brightness and color temperature.
Mode Selection
Use the main control button (refer to the image below for button location) to cycle through the operating modes:
- First Press: Constant On Mode (light remains continuously on).
- Second Press: Night Sensing Mode (light activates only in low-light environments when motion is detected).
- Third Press: All-day Sensing Mode (light activates in any light condition when motion is detected).
- Fourth Press: Off (light is turned off).
Brightness Adjustment (Stepless Dimming)
When the light is on in any mode, long-press the main control button to adjust the brightness continuously from 10% to 100%.
Color Temperature Switching
Short-press the dedicated color switch button (located next to the main control button) to cycle through the three available color temperatures:
- Warm Light (3000K)
- Neutral Light (4000K)
- White Light (6000K)
Motion Sensor Functionality
The integrated PIR motion sensor provides a 120° wide-angle, wide-range sensing capability, effective up to 3 meters. The light will automatically turn on when motion is detected within this range and will remain on as long as continuous movement is sensed.
6. Charging Instructions
The cabinet light is equipped with a rechargeable battery for convenience.
- Connect the provided USB charging cable to the light's charging port.
- Plug the other end of the USB cable into a standard 5V USB power source (e.g., phone charger, computer USB port, power bank).
- Charging Indicator: A steady red light will illuminate to indicate that the unit is charging.
- Full Charge Indicator: The light will turn steady green when the battery is fully charged.
7. Maintenance
To ensure optimal performance and longevity of your cabinet light, follow these maintenance guidelines:
- Cleaning: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
- Battery Care: For best battery life, avoid fully discharging the battery frequently. Charge the device when the light output noticeably diminishes.
- Storage: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
8. Troubleshooting
If you encounter any issues with your PZSUNLY Cabinet Light, please refer to the following common troubleshooting steps:
- Light not turning on in sensor mode:
- Check if the ambient light is too bright (Night Sensing Mode requires low light to activate).
- Ensure motion is within the 3-meter, 120° sensing range.
- Verify the light is not in "Off" mode.
- Check the battery level and charge if necessary.
- Battery life is shorter than expected:
- Constant On Mode (Always on) will drain the battery faster than sensor modes. Consider using sensor modes for energy saving.
- Ensure the unit is fully charged (green indicator light).
- Frequent activation in high-traffic areas will consume more power.
- Light not adhering to surface:
- Ensure the installation surface is clean, dry, and smooth before applying adhesive clips.
- Verify clips are properly installed and the light is magnetically attached to them.
- Light is faulty or damaged:
- If the product exhibits manufacturing defects (e.g., disconnected wires), do not attempt to repair it yourself. Contact customer support for assistance.
9. User Tips
- Optimal Placement: For best motion sensing performance, install the light in areas where movement will directly cross its 120° detection zone, rather than moving directly towards or away from it.
- Versatile Use: This light is ideal for illuminating dark corners in various locations such as kitchens, wardrobes, cabinets, lockers, and desks.
- Energy Saving: To maximize battery life, utilize the Night Sensing Mode in areas where light is only needed when it's dark and motion is present.
- Customizable Lighting: Experiment with the three color temperatures (Warm, Neutral, White) and stepless dimming feature to find the perfect ambiance and brightness for your specific needs.
10. Warranty and Support
This product is certified with RoHS, FCC, and CE standards, ensuring compliance with relevant safety and environmental regulations.
For detailed information regarding product warranty, returns, or technical support, please refer to the official user manual PDF available at: https://manuals.plus/m/40a0d719789cee23ade01cb0bca93a9067657a0d564209111512cf08ff21f5e2 or contact PZSUNLY customer service directly.