Introduction
Thank you for choosing the Retevis RT619/RT19 Two Way Radio. This manual provides important operating instructions, safety guidelines, and feature descriptions to help you get the most out of your device. We believe this two-way radio will provide dependable and reliable communication.
Safety Information
Before using this Two Way Radio, please read this guide which contains important operating instructions for safe usage, RF Energy Awareness, control information, and operational instructions for compliance with RF Energy Exposure limits in applicable national and international standards. Also, read the operational instructions for safe use.
RF Energy Exposure and Product Safety Guide
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum for communication. Improper use of RF energy can cause biological damage. All Retevis two-way radios are designed, manufactured, and tested to meet government-established RF exposure levels. Users are advised to follow specific operating instructions to control RF energy exposure.
For more information on RF energy exposure, refer to: http://www.who.int/en/
Local Government Regulations
When used for employment, users must be fully aware of and control their exposure to meet occupational requirements. Your Retevis two-way radio includes an RF Exposure Product Label and this manual provides necessary operating instructions to satisfy compliance requirements.
Radio License
Business two-way radios operate on regulated radio frequencies. To transmit on these frequencies, a license from local radio management departments (e.g., FCC, ISED, OFCOM) may be required. Consult your local authorities for detailed classification and usage requirements.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the manufacturer may void your authority to operate this radio. Transmitter adjustments should only be made by or under the supervision of a technically qualified person. Unauthorized replacement of any transmitter component could violate regulations.
FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to not causing harmful interference and must accept any interference received. This equipment has been tested and found to comply with Class A digital device limits, designed to provide reasonable protection against harmful interference in a commercial environment. Operation in a residential area may cause interference, requiring the user to correct it at their own expense.
CE Requirements
Shenzhen Retevis Technology Co., Ltd. declares that this radio equipment type complies with the essential requirements and other relevant provisions of RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retevis.com.
Disposal
The crossed-out wheeled-bin symbol indicates that in the European Union, all electrical and electronic products, batteries, and accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Information
- DO NOT operate the radio without a proper antenna attached.
- DO NOT transmit for more than 50% of total radio use time.
- Turn off the radio in areas sensitive to electromagnetic radiation (e.g., hospitals, aircraft, blasting sites).
- For body-worn use, always place the radio in a Retevis approved clip, holder, holster, case, or body harness. Maintain a separation distance of at least 2.5 cm (one inch) from the nose or lips.
- For mobile devices, ensure sufficient distance from a properly installed externally-mounted antenna.
- This radio is designed for "Occupational/Controlled Use Only" and is not intended for general population/uncontrolled environments.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Turn off your radio power in the following conditions:
- Before removing/installing a battery or accessory, or when charging.
- In potentially hazardous environments (near electrical blasting caps, in explosive atmospheres, etc.).
- While taking on fuel or parked at gasoline service stations.
- In any facility where posted notices instruct you to do so (hospitals, health care facilities).
- When on board an aircraft.
Protect your hearing:
- Use the lowest volume necessary.
- Turn up the volume only if in noisy surroundings.
- Turn down the volume before adding a headset or earpiece.
- Limit high-volume headset/earpiece use.
- Do not place the radio's speaker directly against your ear without a headset/earpiece.
- Excessive sound pressure from earphones can cause hearing loss.
Avoid Burns
- Do not use a portable radio with a damaged antenna.
- Exercise care when handling batteries to prevent short circuits.
Long Transmission
When the transceiver is used for long transmissions, the radiator and chassis may become hot.
Safety Operation
- Do not use the charger outdoors or in moist environments.
- Do not disassemble the charger.
- Do not operate a broken or damaged charger.
- Do not place a portable radio in the area over an airbag or in the airbag deployment area.
- Pull by the plug, not the cord, when disconnecting the charger.
- Unplug the charger from the AC outlet before maintenance or cleaning.
- Contact Retevis for assistance regarding repairs and service.
- The adapter should be installed near the equipment and be easily accessible.
Supplied Accessories
The following items are included with your Retevis RT619/RT19 Two Way Radio:
| Item | Quantity |
|---|---|
| Two Way Radio | 2 |
| Li-ion Battery Pack | 2 |
| Belt Clip | 2 |
| Strap | 2 |
| Micro-USB Cable | 1 |
| User's Manual | 1 |

Getting Started (Setup)
Follow these steps to set up your Retevis RT619/RT19 Two Way Radio:
Component Identification

- Power Switch: Located at the top.
- LED Indicator: Located near the power switch.
- Speaker: Front panel.
- Microphone: Bottom front panel.
- PTT Key: Side button for Push-to-Talk.
- Volume "+/-" / Channel Up/Down: Side buttons below PTT.
- Earpiece Interface: Side port for audio accessories.
- USB Charging Port: Side port for charging.
- Sling Jack: Top for attaching a strap.
Battery Installation
To install the Li-ion battery pack:
- Remove the battery cover from the back of the radio.
- Insert the Li-ion battery pack into the compartment, ensuring proper alignment.
- Replace the battery cover until it clicks securely into place.
Attaching the Belt Clip
To attach the belt clip:
- Align the belt clip with the designated slots on the back of the radio.
- Secure the belt clip using the provided screws.

Charging Precautions
To charge the radio:
- Connect the Micro-USB cable to the radio's charging jack.
- Plug the other end of the cable into an AC power source.
- The transceiver indicator light will be blue during charging.
- Once fully charged, the indicator will turn green.

Basic Operation
Power On/Off
Continue to press the power button to switch the radio on. Press this button again for more than 2 seconds to switch the radio off.
Transmit (PTT)
Press the PTT key, then speak into the microphone with a normal tone. Release the PTT key to receive messages from another speaker. The orange light indicates transmission, and the green light indicates reception.

Volume and Channel Adjustment
- Volume Up: Shortly press the "+" key. You will hear a "beep" tone.
- Volume Down: Shortly press the "-" key. You will hear a "beep" tone.
- Increase Channel: Shortly press the "+" key (under main channel mode).
- Decrease Channel: Shortly press the "-" key (under main channel mode).
Key Lock
Press the "-" key for 2 seconds to enter key lock mode. Press it again for 2 seconds to exit key lock mode.
Monitor Function
Press the "+" key for 2 seconds to turn on Monitor. Release the "+" key to close Monitor.
Advanced Features
Low Voltage Warning
The radio will flash red and prompt "please charge" when the battery is low.
Scrambler
Eight sets of scrambling groups are available for scrambling encryption.
Frequency Hopping
Three frequency hopping modes are available for encryption and can be used with other compatible models.
Voice Companding
Turn on this feature to eliminate background noise during communication.
Main Mode (Audio Mode)
The factory default main mode is audio mode. It can be programmed via software in the main channel mode. If no operation occurs for 5 seconds, it will automatically revert to the original mode.
VOX (Voice Operated Exchange)
VOX function allows hands-free transmission. The radio transmits when it detects your voice and stops when your voice stops. To activate, press and hold the side key "+" to turn on voice control mode. Use the "+" and "-" keys to switch the VOX level (off, level 1-9). Press PTT to confirm and exit automatically.
TOT (Time-Out Timer)
TOT prevents a single user from occupying a channel for an extended period. If transmission exceeds the set time, the transceiver will stop transmitting and alarm. Release the PTT switch to stop the alarm and resume standby.
Technical Specifications
| Category | Specification | Value |
|---|---|---|
| General | Frequency Range | FRS |
| Rated Voltage | 3.7V DC | |
| Memory Channel | FRS: 22 or PMR: 16 | |
| Antenna Impedance | 50Ω | |
| Standard Battery | 1300mAh | |
| Working Temperature | -20 to 60°C | |
| Dimensions (HxWxD) | 122x50x18mm | |
| Transmitter | Output Power | 0.5W-3W |
| Modulation | 16K F3E / 11K F3E | |
| Maximum Frequency Deviation | ≤5KHz / ≤2.5KHz | |
| Remanent Radiation Mode | ≤7uW | |
| Electric Current | ≤1.2A | |
| Modulation Distortion | ≤5% (300-3000Hz) | |
| Receiver | RF Sensitivity | ≤0.25uV / ≤0.3uV |
| Audio Frequency Power | ≥200mW | |
| Audio Distortion | ≤5% | |
| Inter-Modulation | ≥60dB | |
| Adjacent Channel Selectivity | ≥65dB | |
| Spurious Rejection | ≥55dB | |


CTCSS (Continuous Tone-Coded Squelch System) and DCS (Digitally Coded Squelch)
The radio supports 50 CTCSS tones and 210 DCS codes to filter out unwanted conversations on the same channel. These codes ensure that you only hear transmissions from users with the same CTCSS/DCS settings.
CTCSS Tones (50)
| Tone (Hz) | Tone (Hz) | Tone (Hz) | Tone (Hz) | Tone (Hz) | Tone (Hz) | Tone (Hz) | Tone (Hz) | Tone (Hz) | Tone (Hz) |
|---|---|---|---|---|---|---|---|---|---|
| 67.0 | 69.3 | 71.9 | 74.4 | 77.0 | 79.7 | 82.5 | 85.4 | 88.5 | 91.5 |
| 94.8 | 97.4 | 100.0 | 103.5 | 107.2 | 110.9 | 114.8 | 118.8 | 123.0 | 127.3 |
| 131.8 | 136.5 | 141.3 | 146.2 | 151.4 | 156.7 | 159.8 | 162.2 | 165.5 | 167.9 |
| 171.3 | 173.8 | 177.3 | 179.9 | 183.5 | 186.2 | 189.9 | 192.8 | 196.6 | 199.5 |
| 203.5 | 206.5 | 210.7 | 218.1 | 225.7 | 229.1 | 233.6 | 241.8 | 250.3 | 254.1 |
DCS Codes (210)
| Code | Code | Code | Code | Code | Code | Code | Code | Code | Code |
|---|---|---|---|---|---|---|---|---|---|
| D023N | D025N | D026N | D031N | D032N | D036N | D043N | D047N | D051N | D053N |
| D054N | D065N | D071N | D072N | D073N | D074N | D114N | D115N | D116N | D122N |
| D125N | D131N | D132N | D134N | D143N | D145N | D152N | D155N | D156N | D162N |
| D165N | D172N | D174N | D205N | D212N | D223N | D225N | D226N | D243N | D244N |
| D245N | D246N | D251N | D252N | D255N | D261N | D263N | D265N | D266N | D271N |
| D274N | D306N | D311N | D315N | D325N | D331N | D332N | D343N | D346N | D351N |
| D356N | D364N | D365N | D371N | D411N | D412N | D413N | D423N | D431N | D432N |
| D445N | D446N | D452N | D454N | D455N | D462N | D464N | D465N | D466N | D503N |
| D506N | D516N | D523N | D526N | D532N | D546N | D565N | D606N | D612N | D624N |
| D627N | D631N | D632N | D645N | D654N | D662N | D664N | D703N | D712N | D723N |
| D731N | D732N | D734N | D743N | D754N | |||||
| D023I | D025I | D026I | D031I | D032I | D036I | D043I | D047I | D051I | D053I |
| D054I | D065I | D071I | D072I | D073I | D074I | D114I | D115I | D116I | D122I |
| D125I | D131I | D132I | D134I | D143I | D145I | D152I | D155I | D156I | D162I |
| D165I | D172I | D174I | D205I | D212I | D223I | D225I | D226I | D243I | D244I |
| D245I | D246I | D251I | D252I | D255I | D261I | D263I | D265I | D266I | D271I |
| D274I | D306I | D311I | D315I | D325I | D331I | D332I | D343I | D346I | D351I |
| D356I | D364I | D365I | D371I | D411I | D412I | D413I | D423I | D431I | D432I |
| D445I | D446I | D452I | D454I | D455I | D462I | D464I | D465I | D466I | D503I |
| D506I | D516I | D523I | D526I | D532I | D546I | D565I | D606I | D612I | D624I |
| D627I | D631I | D632I | D645I | D654I | D662I | D664I | D703I | D712I | D723I |
| D731I | D732I | D734I | D743I | D754I |
Troubleshooting
If you encounter issues with your radio, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio won't turn on | Battery is low or not installed correctly. | Charge the battery or re-install it properly. |
| Cannot transmit or receive | Incorrect channel or CTCSS/DCS settings. Out of range. | Verify channel and CTCSS/DCS settings. Move closer to other radios. |
| Poor audio quality | Low battery, out of range, or interference. | Charge battery, move closer, check for interference sources. |
| Radio constantly transmitting (VOX) | VOX sensitivity too high or background noise. | Adjust VOX sensitivity or disable VOX. |
User Tips
- For optimal battery life, fully charge the radio before first use.
- Keep the radio's antenna clear of obstructions for best signal quality.
- Use the belt clip or strap for secure carrying to prevent accidental drops.
- Familiarize yourself with the PTT button and volume controls for quick adjustments during use.
- When communicating, speak clearly and directly into the microphone.
Warranty and Support
This product comes with a manufacturer's warranty. Please retain your proof of purchase for warranty claims.
Warranty Information
Most new products carry a two-year manufacturer's warranty from the date of purchase. For detailed warranty information, please visit: http://www.retevis.com/after-sale/
Exclusions from Warranty Coverage
- Product damaged by accident.
- Misuse or abuse of the product, or unauthorized alterations/repairs.
- If the serial number has been altered, defaced, or removed.
Support
For assistance, you can:
- Contact the seller where you purchased the product.
- Contact a Retevis Local Repair Center.
For a list of Retevis-approved accessories for your radio model, visit: http://www.retevis.com
You can also view the official user manual PDF here: Retevis RT619/RT19 User Manual (PDF)
Contact Information
Shenzhen Retevis Technology Co., Ltd.7/F, 13-C, Zhonghaixin Science & Technology Park,
No.12 Ganli 6th Road, Jihua Street, Longgang District,
Shenzhen, China
Web: www.retevis.com
E-mail: kam@retevis.com
Facebook: facebook.com/retevis