1. Important Safety Warnings
- Use correct protection: IP44/IP67.
- Match voltage to equipment rating.
- Align and avoid forced plugging/unplugging.
- Do not exceed rated current: 16A/32A/63A/125A.
- Do not overload (within rated power).
- Keep from children; no child operation.
- Inspect regularly; stop use if damaged.
- Do not force into incompatible sockets; anti-mismating by grounding pin position.
This product is not suitable for children aged 0-3 years.
2. Product Overview
This manual covers the Industrial Plugs & Sockets Series, manufactured by HIHAILE. These connectors are designed for robust electrical connections in industrial environments, featuring waterproof and dustproof properties.
The product line includes various types such as Panel Mount Sockets, Wall Mount Sockets, Couplers, Industrial Plugs, Wall Plugs, and Inward Tilt Sockets, available in 3-pin (3P), 4-pin (4P), and 5-pin (5P) configurations for 16A and 32A current ratings.
3. Setup and Installation
Before connecting any industrial plug or socket, ensure the equipment's power supply is OFF.
- **Choose Correct Connector**: Select the appropriate current rating (16A/32A/63A/125A) and number of poles (3/4/5 pin) that match your equipment's power requirements.
- **Prepare Wiring**: Ensure all wiring is correctly stripped and ready for connection to the terminals.
- **Connect Wires**: Open the connector housing. Connect the wires to the corresponding terminals (Phase, Neutral, Earth) as indicated inside the connector. Ensure secure connections.
- **Assemble Connector**: Close the connector housing, ensuring all seals are properly seated to maintain the IP44/IP67 protection rating.
- **Insert Plug**: Insert the plug fully into the socket. If available, ensure it locks for good contact.
- **Combination Products**: For combination products (e.g., plug + coupler + panel), assemble them as diagrammed in the specifications section.
Wiring Example: Panel Socket (3P Blue)
4. Operating Instructions
Once the plug is securely inserted into the socket and the equipment is connected, you may turn on the power supply to the equipment.
To disconnect, turn off the equipment's power supply BEFORE unplugging the connector.
5. Maintenance
- Store away from heat, moisture, and corrosive substances.
- Keep the connectors clean and dry.
- Inspect regularly for any signs of damage or wear. If damaged, discontinue use immediately.
6. Troubleshooting
- **Poor contact**: Check socket blades for looseness or blockage. Wipe oxidized pins if present. If the issue persists, replace the connector or contact service.
- **Hot plug/socket**: Slight warmth is normal during operation. Excessive heat indicates an overload or poor contact. Stop use immediately and investigate the cause.
- **Voltage identification**: Check the markings on the housing for voltage and the grounding pin position (clock orientation) to ensure compatibility.
7. Specifications
| Feature | Detail |
|---|---|
| Material | Plastic (Flame-retardant) |
| Socket Type | Combined |
| Installation Type | Wall Mounted (for specific models) |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| Shape | Irregular |
| Rated Current | 16A / 32A |
| Application | Industrial |
| Protection Class | IP44 (splash-proof) for indoor/outdoor use; IP67 (dust/immersion) for harsh environments |
| Origin | Mainland China |
| Certification | CE, RoHS |
| Standard | 3P / 4P / 5P (meets IEC/GB standards) |
| 3P Voltage | 220-240V ~ 2P + E |
| 4P Voltage | 380-415V ~ 3P + E |
| 5P Voltage | 220-380V / 240-415V ~ 3P + N + E |
| Earth Contact Position | 6h |
| Cable Nominal Cross-Section Area (16A) | 1-2.5 mm² |
| Cable Nominal Cross-Section Area (32A) | 2.5-6 mm² |
Dimensional Diagrams and Specifications
Below are detailed diagrams and tables for various plug and socket types, including dimensions (in mm) and cable cross-section areas.
8. User Tips
- Always double-check the security of brass pins within the plastic housing, especially if the product appears to be 3D printed or has visible seams. Loose pins can lead to poor contact and overheating.
- Ensure the protective cover is always closed when the socket is not in use to maintain its IP44/IP67 rating against water and dust.
9. Warranty and Support
For any quality issues or further assistance, please contact the official customer service or an authorized service center.
A user manual in PDF format is available for download: View User Manual (PDF)
10. Product Video
Watch this video for a visual overview of the product range and manufacturing process.