1. Introduction
Thank you for purchasing the Feelworld F6 PLUSX 5.5-inch high bright touch screen monitor. This manual provides detailed instructions for setup, operation, and maintenance to ensure you have a great experience with your unit. Please read it carefully before use.
2. Safety Precautions
To ensure safe operation and prevent damage to the product, please observe the following:
- Avoid heavy impact or dropping the product.
- The screen is made of glass. Do not drop the screen face down. Keep away from injury if the screen is broken.
- Keep the product away from heat sources and avoid prolonged exposure to direct sunlight, as this can damage the LCD screen.
- Do not attempt to disassemble or repair the unit yourself. There are no user-serviceable components inside.
- To maintain the LCD screen and protect its cover, follow these guidelines:
- Do not use hard objects to hit the screen.
- Do not force or aggressively wipe the screen.
- Do not use chemical solutions to clean the screen.
- Do not spray any detergent directly on the screen.
- Do not write on the screen directly.
- Do not stick anything on the screen.
- Wipe the screen with a clean, soft cloth, ensuring no water remains on the screen.
3. Key Features
- 5.5-inch 1920x1080 Full HD IPS screen.
- Touch screen menu operation for ease of use.
- High Brightness 1600nits, ensuring visibility in sunlight.
- Supports 3D LUT Log to REC.709 conversion and user 3D LUT upload.
- Equipped with professional monitoring functions: Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, etc., to aid in accurate exposure and focus.
- Supports screenshots and image overlay functions.
- Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F & LP-E6 dual-purpose battery slot.
- Stereo Earphone output.
- DC 8V power out to power your DSLR or mirrorless camera.
4. Setup
4.1 Package Contents
The following items are included in your Feelworld F6 PLUSX package:
- 1 × Feelworld F6 PLUSX Monitor
- 1 × User Manual (this document, also available as PDF)
- 1 × Tilt Arm
- 1 × Micro HDMI Cable
- 1 × Sunshade
A PDF version of the user manual is available at: User Manual (PDF)
4.2 Panel Instructions
4.2.1 Front Panel
The front panel features the 5.5-inch display and an indicator light.
Indicator Light:
- When power is connected, the light is red.
- Long press the EXIT/ button to turn on the monitor; the light turns yellow.
- Once a signal is connected, the light turns green.
4.2.2 Rear Panel
The rear panel houses the battery lock and dual-purpose battery slot.
Battery Lock: The PUSH lock secures the battery. Press PUSH before removing the battery.
NP-F&LP-E6 Dual-purpose Battery Slot: Compatible with NP-F series batteries (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530) and Canon LP-E6 series batteries.
4.2.3 Top Button
The top of the monitor features the power/touch button and the MENU wheel.
- /TOUCH: Long press to turn the monitor on/off. Short press to toggle the screen touch function on/off.
- MENU: When the menu is not displayed, rotate the wheel to adjust volume or backlight. Press to open the main menu, rotate to select an item, and press again to open the corresponding function.
4.2.4 Bottom Port
The bottom of the monitor includes the SD card slot and power input ports.
- SD Card: Used for 3D LUT upload and firmware upgrades.
- DC IN 12V: DC power input (5.5mm outer, 2.1mm inner barrel connector).
- DC IN 5V (Type-C): Can be connected to a power bank for local power supply. This port does not support data transmission or loop-out power.
- 3.5mm Earphone Port: Stereo earphone output.
4.2.5 Left Port
The left side of the monitor provides HDMI input/output and DC output.
- HDMI IN: V1.4 HDMI signal input, up to 4K@30Hz.
- HDMI OUT: V1.4 HDMI signal output, up to 4K@30Hz.
- DC OUT 8V: DC power output interface (barrel connector) for powering cameras with a separately available DC coupler via adapter (e.g., NP-FW50 for Sony, LP-E6 for Canon, DMW-BLF19 for Panasonic).
4.3 Power Supply
The F6 PLUSX offers flexible power options:
- Battery Plate: The rear cover is equipped with an NP-F and LP-E6 dual-purpose battery plate.
- DC IN 12V: Use a 12V/1.5A adapter with the 5.5mm outer, 2.1mm inner barrel connector.
- Type-C 5V: Connect to a power bank or mobile phone charger (at least 5V/2A).
Recommendation: Use standard original NP-F970 batteries for optimal performance. Different battery specifications will affect working time. Remove the battery if the monitor will not be used for an extended period.
4.4 Mounting the Monitor
The monitor features three 1/4"-20 thread points (top, bottom, and right side) for versatile mounting.
4.4.1 Tilt Arm Mounting
The included Tilt Arm allows you to secure the monitor to your camera via a shoe mount or 1/4"-20 thread. This provides:
- 360-degree rotation for convenient viewing.
- Secure and lightweight mounting.
- An additional cold shoe mount on the arm for accessories like microphones, LED lights, or wireless receivers.
For stable installation, align the two small dots on the tilt arm with the monitor. This allows rotation without loosening screws.
4.5 Sunshade Installation
To install the sunshade:
- First, securely attach the Sunshade Frame to the monitor.
- Open the sunshade and align the sticker inside the sunshade with the marked part on the sunshade frame.
- Smooth and press the three sides of the sunshade onto the frame to complete the installation.
5. Operating Instructions
5.1 Menu Operation
5.1.1 Direct Touch Screen Operation
Ensure the screen touch function is enabled.
- Main Menu: Double-click on the screen to open the main menu (on the left side). Click on a menu item to display its secondary menu. Click on an option to select or set it. Click outside the menu to exit.
- Shortcut Menu: When the main menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Click a function icon to activate/deactivate it. Swipe left/right to access more functions. Click outside the shortcut menu to exit.
- Quick Adjustments: On the left half of the screen, you can directly adjust the screen backlight. On the right half, you can directly adjust the volume.
5.1.2 MENU Wheel Operation
- When the menu is not displayed, rotate the wheel to adjust backlight or volume. (Configurable in User Option > Left Right Key Set).
- Press the "MENU" scroll wheel button to enter the OSD main menu. Scroll the wheel to navigate through secondary menu functions.
- Press the "MENU" wheel key again to enter a secondary menu. Scroll to select a function, then press "MENU" to confirm.
- Scroll the wheel to adjust parameter values.
- Long press the MENU wheel button to exit the menu.
5.2 Menu Interface Instruction
The menu interface is organized into several categories:
- Assist: Contains tools for focus, exposure, and color analysis.
- Marker: Provides various on-screen markers.
- Image: Settings for image display and manipulation.
- User Option: Advanced user settings including LUTs and display adjustments.
- System: General system settings like language and firmware.
5.3 Menu Function Details
5.3.1 Assist Functions
- All Waves: On/Off. Displays waveform, vector, histogram, and embedded audio.
- Waveform: On/Off. Modes: RGB, YUV, Y. Shows overall brightness and checks lighting evenness. Transparency can be set (Off, 25%, 50%, 75%).
- Vector: On/Off. Shows image saturation and color spectrum.
- Histogram: On/Off. Modes: RGB1, RGB2, Y. Displays color tone distribution and exposure status.
- Focus Assist: On/Off. Colors: Red, Green, Blue. Peaking Level: 1-10. Highlights in-focus areas.
- Embedded Audio: On/Off. Provides numerical indicators for audio levels.
- Over Exposure: On/Off. Exposure Level: 10-100. Highlights overexposed areas with a striped pattern.
- Check Field: On/Off. Modes: Red, Green, Blue, Mono. Adjusts hue and saturation quickly.
- False Colors: On/Off. Modes: Normal, ARRI. Depicts objects in colors that differ from a true color image.
5.3.2 Marker Functions
- Grid: On/Off. Divides the screen into equal grids (e.g., 4x4, 5x5, 8x8). Colors: Red, Green, Blue, Black, White, Gray.
- Safe Frames: On/Off. Modes: 80%, 85%, 90%, 93%, 96%, 2.35:1. Colors: Red, Green, Blue, Black, White, Gray.
- Center Marker: On/Off. Colors: Red, Green, Blue, Black, White, Gray.
- Ratio Marker: On/Off. Modes: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1. Colors: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5.
5.3.3 Image Functions
- Scan Mode: Under Scan, Over Scan.
- Aspect Ratio: Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen.
- Anamorphic: On/Off. Modes: 1.33X, 1.6X, 2.0X, 2.0X MAG, User (customizable 1.20X-2.00X).
- Image Flip: On/Off. Modes: H Flip, V Flip, H_V Flip.
- Zoom Mode: On/Off. Modes: 2X, 4X, 9X, 16X, User (customizable 100%-200%).
- Image Freeze: On/Off.
- P2P (Pixel to Pixel): On/Off. Displays the image from the 1:1 signal source without scaling.
5.3.4 User Option Functions
- LUT: On/Off. When enabled, allows selection of built-in LUTs (SLOG2, SLOG3, LOGC, VLOG) and custom loaded LUTs.
- Lut Table: Shows built-in and custom loaded LUTs (up to 32).
- HDR: On/Off. Modes: HLG1, HLG2, HLG3. Provides dynamic range and detail.
- Display Adjustment:
- Backlight: 0-100.
- Brightness: 0-100.
- Contrast: 0-100.
- Saturation: 0-100.
- Tint: 0-100.
- Color Temp.: 5600K, 6500K, 9300K, User (customizable RGB 0-255).
- Left Right Key Set: Configures the function of the MENU wheel when the menu is not displayed (Volume, Backlight).
5.3.5 System Functions
- Language: English, Simplified Chinese, Spanish, Portuguese, French, German, Japanese, Traditional Chinese, Korean, Dutch, Russian.
- OSD Time: Off, 15Sec, 30Sec, 45Sec. Sets how long the menu stays on screen.
- OSD Trans: Off, 25%, 50%, 75%. Adjusts menu background transparency.
- No Signal: Red, Green, Blue, Black, White, Gray. Changes background color when no signal is present.
- Volume: 0-100. Adjusts speaker volume.
- Reset: Resets system to original settings.
- Firmware Update: Insert upgrade file on SD card, then select Confirm to update.
5.4 How to Load LUTs
The monitor supports loading up to 32 custom 3D LUT files.
- SD Card Format: Support FAT32 or NTFS. For MAC systems, format the SD card in MS-DOS (FAT).
- File Requirements:
- LUT file format suffix must be
.cube. - Single file size not to exceed 7.9Mb.
- Supports LUT-3D-Size 16, 17, 32, 33, 64, 65.
- LUT file names must be in English or Arabic numerals.
- LUT file format suffix must be
- Loading Steps:
- Ensure the SD card is correctly inserted.
- Enter the main menu, navigate to LUT > Lut Import, and click Confirm. The monitor will automatically detect the SD card.
- If valid LUT files are found, the monitor will load them and display "[n] name", where [n] is the quantity. Upon successful loading, the screen will show "complete[n]".
- Clearing Imported LUTs: Insert an empty SD card into the monitor, go to LUT > Lut Import, and click Confirm. The imported LUTs will be cleared.
6. User Tips
Based on common user experiences, here are some tips for optimizing your use of the Feelworld F6 PLUSX monitor:
- Outdoor Visibility: The 1600nit brightness is excellent for daylight. For extremely harsh sunlight, ensure the sunshade is properly installed to minimize glare.
- Power Management: When using batteries, carry spares, especially for long shoots. Consider using the DC OUT feature to power your camera from the monitor's battery for extended run-time.
- Custom LUTs: Experiment with different 3D LUTs to achieve desired color grades directly on set. Keep your LUT files organized on the SD card for quick access.
- Monitoring Tools: Utilize the Waveform, Vectorscope, and Histogram tools regularly to ensure accurate exposure and color balance, especially in challenging lighting conditions.
- Touch Screen Responsiveness: If the touch screen seems unresponsive, try toggling the touch function off and on using a short press of the /TOUCH button.
7. Maintenance
Regular maintenance helps prolong the life of your monitor:
- Cleaning: Use a soft, dry, lint-free cloth to clean the screen and body. Avoid abrasive materials or chemical cleaners.
- Storage: Store the monitor in a cool, dry place away from direct sunlight and extreme temperatures. If storing for a long period, remove batteries.
- Firmware Updates: Periodically check the Feelworld website for new firmware updates to ensure optimal performance and access to new features.
8. Troubleshooting
8.1 Only Black and White or Monochrome Picture
- Check saturation, brightness, and contrast adjustments in the menu.
- Verify that "Monochrome" is not enabled in the Assist functions or other settings.
8.2 No Image After Power On
- Check if the signal cable is securely connected.
- Ensure you are using the standard adapter or that the battery is fully charged if powering via battery.
8.3 Earphone No Sound
- Check if the Volume control is enabled and increase the volume level.
If you encounter other issues not listed here, please contact Feelworld customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Panel Size | 5.5" touch screen |
| Resolution | 1920 × 1080 pixels |
| Dot Pitch | 0.069 (H) × 0.069 (V) mm |
| Aspect Ratio | 16:9 |
| Brightness | 1600cd/m² |
| Contrast | 1000:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Adjustable Backlight | Yes |
| Input | HDMI V1.4 |
| Output | HDMI V1.4, 3.5mm stereo headphone jack |
| Power In | DC IN 12V (Barrel 5.5mm outer, 2.1mm inner), DC IN 5V (Type-C, use 5V/2A or more) |
| Power Out | DC OUT 8V (Barrel 5.5mm outer, 2.1mm inner; for DSLR or mirrorless camera) |
| HDMI Input/Output Support Format |
480i/480p/576i/576p 720p(60/59.94/50/30/29/25/24/23.98) 1080i(60/59.94/50) 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) 4K UHD 3840×2160p (30/29.97/25/24/23.98Hz) DCI 4K 4096×2160p (24Hz) |
| Power Input Voltage | 7~24V |
| Power Consumption | ≤10W |
| Unit Size (mm) | 148L×93H×20D (mm) |
| Unit Weight | 235g |
| Mount Points | (3) 1/4-20 thread points (top, bottom, right sides) |
| Working Temperature | -20°C ~ 50°C |
| Storage Temperature | -30°C ~ 60°C |
10. Warranty and Support
The product warranty for Feelworld monitors is one year from the date of purchase.
Feelworld is committed to providing high-quality products. In the event of unexpected issues, we aim to resolve them amicably with our customers:
- Quality Problems: If a quality issue arises, the buyer must provide photos, videos, or other evidence for evaluation and identification.
- Man-made Damage: Buyers are responsible for damages caused by misuse or accidents.
- Product Quality Processing: For confirmed quality issues, the buyer may return the goods. The buyer is responsible for return shipping costs. Upon receipt and verification, Feelworld will send a new product and cover the resend shipping cost.
For further assistance or inquiries, please contact Feelworld customer support.
11. Product Demonstration Video
Watch this video to see the Feelworld F6 PLUSX in action, demonstrating its use in food videography and its display capabilities.