RACBOX LED Roof Clearance Light

Contents

RACBOX 12V 24V Round Trailer LED Roof Clearance Lamp User Manual

Model: LED Roof Clearance Light (010-010)

1. Product Information

This product is an auxiliary accessory for automotive lighting, designed for the replacement and upgrade of original car lights. It complies with national automotive lighting industry standards and has undergone strict quality testing.

  • Product Name: 12V 24V Round Trailer LED Roof Clearance Lamp Rear Brake Light for Car Truck Tractor Mini Side Marker Light Waterproof Taillight
  • Model: LED Roof Clearance Light
  • Batch/Serial Number: 010-010
  • Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com
  • EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD,CORK,T23 AT2P, IRELAND, info@apex-ce.com

For a detailed item guide, please refer to the official User Manual (PDF).

2. Safety & Warnings

Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Setup & Installation

Follow these steps for proper installation:

  1. Turn off the vehicle engine and disconnect the power supply to avoid short circuits.
  2. Locate the mounting position of the original clearance lights assembly on your vehicle.
  3. Remove any existing fixing screws or clips that hold the stock light assembly in place.
  4. Unplug the power connector and carefully remove the original clearance lights assembly.
  5. Install the new clearance lights assembly into the designated mounting position.
  6. Secure the light assembly with screws or clips to ensure a stable installation.
  7. Connect the power plug correctly. If the light does not work, reverse the plug polarity.
Components of the LED light: light unit, rubber grommet, and metal ring.
Figure 1: Individual LED light components including the light unit, rubber grommet, and metal ring.
Diagram showing product dimensions: 30mm diameter, 20mm height, 18.5mm mounting hole, 19mm base diameter.
Figure 2: Product dimensions for installation, showing a diameter of 30mm and a height of 20mm.
Detailed product size diagram with measurements for the light unit.
Figure 3: Detailed measurements of the LED light, including the 18.5mm visible diameter and 19mm base diameter.

4. Operation

Once installed, the LED lights are ready for operation. They are designed for continuous use as clearance, side marker, or brake lights.

  1. After installation, test all light functions to ensure normal operation.
  2. The lights will illuminate when the corresponding vehicle circuit (e.g., parking lights, brake lights, turn signals) is activated.
Red LED lights installed on the side and roof of a truck and trailer.
Figure 4: Red LED lights functioning as side markers and roof clearance lights on various vehicles.
Amber LED lights installed on the side and roof of a truck and trailer.
Figure 5: Amber LED lights functioning as side markers and roof clearance lights on various vehicles.
Close-up of an amber LED light illuminated in the dark.
Figure 6: Close-up view of an illuminated amber LED light.
Close-up of a red LED light illuminated in the dark.
Figure 7: Close-up view of an illuminated red LED light.

Video 1: Product demonstration showing the LED lights and their components.

5. Maintenance

These LED lights are designed for durability and low maintenance, featuring waterproof and dust-resistant properties.

  • Regular Inspection: Periodically check the lights for any signs of damage, loose connections, or debris accumulation.
  • Cleaning: Clean the lens with a soft, damp cloth as needed to ensure maximum light output. Avoid abrasive cleaners.
  • Connection Check: Recheck all screws and electrical connections periodically to ensure they remain firm and reliable.

6. Troubleshooting

If you encounter issues with your LED lights, try the following troubleshooting steps:

  • Light Not Working: If a light does not illuminate after installation, try reversing the polarity of the power plug. Ensure the vehicle's power supply is active and the circuit is not shorted.
  • Dim or Flickering Light: Check all wiring connections for looseness or corrosion. Ensure the voltage supplied to the light is within the specified 12V-24V range.
  • Physical Damage: If the light housing or lens is cracked or damaged, replace the unit to maintain waterproof integrity and light performance.

7. Specifications

Feature Detail
Type LED Round Brake Light / Clearance Light Assembly
Input Voltage 12V - 24V
Material ABS + Metal Ring
Wiring 2 Lines Connection
LED Color Options Red, Yellow (Amber)
Lens Color Smoke
Dimensions (Approx.) 30mm Diameter, 20mm Height, 18.5mm Visible Diameter, 19mm Base Diameter
Features Waterproof, Dust Resistant, High Quality, Low Power & Current Draw, Long Life LED
Application Universal for Dump Truck, Semi Trailer, Boat, Camper, Wagon Van, ATV, etc.
Function Interior/Exterior Indicator, Roof Lighting, Side Turn Signal, Rear Brake Light, Clearance Light

8. User Tips

  • These lights are versatile and can be effectively mounted in various positions, such as on the rear bumper or the top of a carriage, to serve as clearance or marker lights.
  • Consider purchasing different colors (Red or Amber) to suit specific vehicle requirements or aesthetic preferences for different mounting locations.
  • The straightforward design and installation make these lights a practical choice for vehicle lighting upgrades.

9. Warranty & Support

While specific warranty details are not provided, the product is manufactured to meet national automotive lighting industry standards and undergoes strict quality testing.

For any questions or support needs regarding the product, please contact the seller or manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.