QYJSD LED Angel Eyes Cotton Lights

Contents

QYJSD LED Angel Eyes Cotton Lights with Turn Signal - User Manual

Model: LED Angel Eyes Cotton Lights

Brand: QYJSD

1. Introduction

Thank you for purchasing the QYJSD LED Angel Eyes Cotton Lights. This product is designed to enhance the aesthetic and functional lighting of your car or scooter headlights, providing vibrant RGB colors and integrated turn signal functions. Featuring APP Bluetooth control, you can easily customize your lighting experience. Please read this manual carefully before installation and use to ensure proper operation and safety.

LED Angel Eyes with APP control and various color options.

LED Angel Eyes with APP control and various color options.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

  • Ensure the vehicle's power is OFF before installation to prevent electrical shock.
  • Verify the correct voltage (12V or 24V DC) for your vehicle. Connecting to an incorrect voltage (e.g., 5V) will damage the lights.
  • Professional installation is highly recommended for optimal performance and safety.
  • Do not modify the product in any way not described in this manual.
  • Keep the product away from excessive heat sources.
  • Although the product is IP68 waterproof, ensure all connections are secure and protected from moisture during installation.

3. Package Contents

Please check the package for the following items:

  • 1 Pair of Angel Eye Halo Rings
  • 1 Bluetooth Symphony Controller
  • Wiring Harness
Contents of the LED Angel Eyes package, including rings, controller, and wiring.

Contents of the LED Angel Eyes package.

4. Specifications

Feature Detail
Product Name Bluetooth Symphony Controller
Voltage Range 12V / 24V DC
Item Weight 180g
Item Type Atmosphere lamp
LED Type 3535 Chips
Lumens 10Lm/SMD
Color RGB Streamer DRL + Turn Signal (Yellow)
Outside Diameter Options 60mm, 70mm, 80mm, 90mm, 95mm, 100mm, 110mm, 120mm
Waterproof Rating IP68
Connection Mode Bluetooth 4.0
Support System Android 4.4 and above / iOS 11.0 and above
Detailed product size chart for various LED ring diameters (60mm to 120mm).

Detailed product size chart.

5. Installation

5.1 Wiring Instructions

Follow these steps to connect the LED Angel Eyes:

  1. Connect the black wire to the negative pole of your vehicle's power supply.
  2. Connect the red wire to the daytime running lights (DRL) circuit. This will activate the RGB halo rings.
  3. Connect the yellow wire (short) to the left turn signal circuit.
  4. Connect the yellow wire (long) to the right turn signal circuit.
Wiring diagram for the LED Angel Eyes controller.

Wiring diagram for the LED Angel Eyes controller.

Demonstration of LED Angel Eyes wiring, turn signal functions, and APP color control.

5.2 APP Download and Connection

To control your LED Angel Eyes, you need to download and install the companion APP:

  1. Download the APP: Scan the QR code on the Bluetooth Symphony Controller or search for "LED LAMP" in your device's app store.
  2. Enable Bluetooth and Location: On your mobile device, ensure both Bluetooth and location services are enabled.
  3. Open the APP: Launch the "LED LAMP" application.
  4. Connect to Device: On the APP homepage, manually scroll down to refresh the interface. The APP will automatically search for nearby devices. Select the corresponding device icon (e.g., "LED DMX 00-XXXX") to enter the lighting control interface.
Diagram illustrating APP interface functions for LED control.

Diagram illustrating APP interface functions for LED control.

6. Operation

Once connected, you can control your LED Angel Eyes using the APP:

  • Color Selection: Use the color wheel to select any desired color. You can also adjust RGB values or choose from preset colors.
  • Mode Selection: The APP offers various lighting modes, including up to 120 preset modes. You can customize modes and adjust speed and brightness.
  • Brightness Adjustment: Easily slide to adjust the brightness of the lights.
  • Music Features: The APP supports voice control and music synchronization, allowing the lights to react to sound.
  • Settings: Access settings to configure RGB sorting, timing, subarea lighting, and skin replacement options.
  • Button Functions (K1, K2, K3): These buttons can be configured in the APP settings to switch startup mode, switch turn mode, and adjust the speed of the startup mode.
Mobile APP interface for intelligent color control.

Mobile APP interface for intelligent color control.

7. Maintenance

  • Cleaning: Gently wipe the LED rings with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
  • Connection Check: Periodically inspect all wiring connections to ensure they are secure and free from corrosion.
  • Water Resistance: The product has an IP68 waterproof rating, meaning it is protected against dust and immersion in water. However, avoid prolonged submersion or high-pressure water jets directly on the connections.
  • Storage: If storing the product for an extended period, keep it in a cool, dry place away from direct sunlight.

8. Troubleshooting

8.1 APP Connection Issues

If the APP cannot connect to the controller:

  • Bluetooth & Location: Ensure both Bluetooth and location functions are enabled on your mobile device.
  • Nearby Devices: Check if another phone is already connected to the controller. Bluetooth 4.0 supports one-to-many control, but not many-to-many. Disconnect any other connected devices.
  • Phone System Settings: Verify that the Bluetooth device is not already connected in your phone's system settings. If it is, disconnect it and exit the APP from the background before reopening.
  • Restart APP/Phone: If Bluetooth is on but not connecting, exit the APP from the background and reopen it. If issues persist, restart your phone and power on the lights again, then try connecting via the APP.
  • Reinstall APP: As a last resort, uninstall and reinstall the APP, then power on the lights and try connecting again.

8.2 Lights Not Functioning

  • Power Supply: Ensure the lights are receiving power and the wiring is correctly connected to the vehicle's electrical system.
  • Voltage Compatibility: Confirm that the power supply voltage is 12V or 24V. Connecting to a 5V source will burn out the lights.
  • Loose Connections: Check all wiring connections for tightness and proper contact.
  • Controller Malfunction: If individual lights or sections are not working, the controller might be faulty.

9. User Tips

  • Voltage Caution: Always ensure the correct voltage (12V/24V) is used. Do not connect to a 5V power source, as this will immediately damage the lights.
  • Direct Battery Connection: If connecting directly to a battery, it is highly recommended to add an inline fuse and a relay for enhanced safety and protection against electrical issues.
  • Wiring Durability: Some users suggest reinforcing the wiring connections for increased durability, especially in exposed areas.
  • Multiple Lights: One controller can manage multiple lights if they are connected to the same controller unit.
  • Brightness: The lights are noted for their strong and effective illumination.

10. Warranty and Support

For warranty information, technical support, or further assistance, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

An official user manual in PDF format may be available for more detailed instructions. Please refer to the seller's product page or contact support for access to this document: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.