ASCELINA PL230

Contents

ASCELINA Modern LED Wall Lamp User Manual

Model: PL230

1. Introduction

Thank you for purchasing the ASCELINA Modern LED Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

ASCELINA Modern LED Wall Lamp installed above a bathroom mirror

Figure 1: ASCELINA Modern LED Wall Lamp in a bathroom setting.

2. Safety Information

  • Always disconnect the power supply before installation, cleaning, or maintenance.
  • Ensure the voltage rating of the fixture matches your local power supply (90-260V AC).
  • Do not install the lamp in flammable or excessively humid locations.
  • All electrical connections must be made in accordance with local and national electrical codes. If you are unsure, consult a qualified electrician.
  • Do not attempt to modify the fixture.

3. Setup and Installation

3.1. Installation Requirements

  • Check all parts and accessories of the lamp are present and undamaged.
  • Ensure the power supply is cut off or the main circuit breaker is closed before beginning installation.
  • Do not install the lamp in flammable or humid environments.

3.2. Installation Procedure

Refer to the diagram below for visual guidance during installation. A detailed PDF user manual is available for download from the product page for further reference.

Installation diagram for ASCELINA LED Wall Lamp showing 7 steps

Figure 2: Installation Diagram and Steps.

  1. Confirm Position: Determine the desired mounting position for the lamp and mark the locations where holes need to be drilled.
  2. Drill Holes: Drill holes in the marked areas.
  3. Insert Plugs: After drilling, insert the rubber plugs into the holes. Tap gently with a hammer if necessary to ensure they are flush.
  4. Fix Pendant: Use a screwdriver to securely fix the mounting bracket (pendant) to the wall.
  5. Connect Wires: Connect the live wire, ground wire, and neutral wire to the corresponding terminals on the connector. Ensure connections are secure.
  6. Connect Cables: With the power still off, connect the lamp's cables to the main electrical supply cables.
  7. Secure Lamp: Tighten the screws to firmly attach the lamp fixture to the mounting bracket on the wall.

4. Operating Instructions

The ASCELINA Modern LED Wall Lamp is designed for simple operation.

  • Power On/Off: The lamp is typically controlled by a standard wall switch connected to its power supply. Flip the switch to turn the lamp on or off.
  • Light Temperature (if applicable): Depending on the model purchased, your lamp may offer different light temperatures:
    • Neutral Light: Provides a balanced white light, suitable for general illumination and tasks.
    • Tricolour Light: Allows switching between Warm White, Neutral White, and Cool White light. This is usually controlled by rapidly toggling the wall switch (off-on-off-on) to cycle through the modes.
LED lamp above a mirror showing neutral lightLED lamp installed above a cabinet showing warm light

Figure 3: Examples of different light temperatures.

5. Maintenance

5.1. Cleaning

The lamp is made with materials that are easy to clean, such as high permeability silicone. To maintain its appearance and performance:

  • Ensure the power is off before cleaning.
  • Wipe the lamp body and shade with a soft, dry, or slightly damp cloth.
  • Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and silicone material.

5.2. LED Light Source

This fixture uses integrated LED bulbs, which are designed for long-lasting performance and are not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced. Contact customer support for assistance.

6. Troubleshooting

If you experience issues with your LED Wall Lamp, please try the following steps:

  • Lamp Does Not Light Up:
    • Check if the power supply is connected and the wall switch is in the 'ON' position.
    • Verify that the circuit breaker has not tripped.
    • Ensure all wiring connections are secure (only check if you are qualified and have disconnected power).
  • Flickering Light:
    • Ensure the voltage supply is stable and within the specified range (90-260V).
    • Check for loose wiring connections.

If the problem persists after performing these checks, please contact customer support.

7. Specifications

FeatureSpecification
Brand NameASCELINA
Model NumberPL230
Item TypeWall Lamps
Light SourceLED bulbs (Integrated)
Is Bulbs IncludedYes
Is DimmableNo
Voltage90 - 260 V AC
Power SourceAC
MaterialIron, Aluminum, Silicone
Body MaterialIRON
Shade DirectionDown
TechnicsPerforated
Installation TypeWall Mounted
Installation MethodAssembly
Number of Light Sources1
Lighting Area3-5 square meters
Luminous Flux60-249 lm
Color OptionsBlack, White
StyleModern Style
CertificationCCC, CE, PSE, ROHS
Warranty2 years

7.1. Dimensions and Power Output

LengthDimensions (L x H x W)Power OutputDistance from Wall
40 cm40 cm x 2 cm x 5 cm8 W6.5 cm
60 cm60 cm x 2 cm x 5 cm (approx.)11 W (approx.)6.5 cm
100 cm100 cm x 2 cm x 5 cm18 W6.5 cm
Dimensions for 40cm white lampDimensions for 100cm black lamp

Figure 4: Dimensional details for 40cm (left) and 100cm (right) models.

8. User Tips

No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation. However, general tips for LED lighting include:

  • For optimal lifespan, avoid frequently switching the light on and off rapidly unless cycling through light modes.
  • Consider the light temperature (Neutral or Tricolour) based on the room's function. Neutral light is good for tasks, while warmer tones create a cozier atmosphere.

9. Warranty and Support

9.1. Warranty

This ASCELINA Modern LED Wall Lamp comes with a 2-year warranty from the date of purchase, covering manufacturing defects. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

9.2. Customer Support

For any questions, technical assistance, or warranty claims, please contact the seller or ASCELINA customer service through the platform where the product was purchased. Please have your order number and product model (PL230) ready when contacting support.

© 2023 ASCELINA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.