ZODOLAMP D-1253

Contents

ZODOLAMP Ice Cube Lava Chandelier Instruction Manual

Model: D-1253

Brand: ZODOLAMP

1. Product Information

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ZODOLAMP Ice Cube Lava Chandelier.

  • Product Name: Pendant lights
  • Model: D-1253
  • Batch/Serial Number: A251123-02
  • Manufacturer: Zhongshan Kuzhimi Technology Co., Ltd.
  • Manufacturer Address: A309, Building 1, Jiapu Le Science and Technology Park, No. 8, Qianjin 2nd Floor, Tanzhou Town, Zhongshan City, Guangdong Province
  • EU Authorized Representative: E-CrossStu GmbH, Germany-DE-Mainzer Landstr.69

Compliance Information

This product complies with relevant electrical safety, electromagnetic compatibility, and environmental regulations. Conformity markings include:

CE Mark UKCA Mark RoHS Mark

2. Safety & Warnings

2.1. Installation Safety

  • This product must be installed by a professional electrician.
  • Before installation, ensure the main power switch is turned off to prevent electric shock.
  • Verify that the ceiling's load-bearing capacity is at least 2 times the product's weight.
  • Do not install on flammable materials (e.g., wood wallpaper, foam board). If necessary, add a thermal insulation layer.
  • After installing the hanging chain/suspension rod, check its firmness to prevent the lamp from falling.
  • Do not modify the structure of the lighting fixture without authorization (e.g., adding lamp sockets or extending wires).

2.2. Use Safety

  • Do not use in damp environments (e.g., directly above a bathroom or kitchen sink) to avoid short circuits from water vapor.
  • Do not exceed the maximum power limit of the marked light bulb to prevent overheating, burnout, or fire.
  • Children should be supervised by adults when near the fixture. Avoid touching high-temperature components (lamp body, bulbs) or ingesting small accessories.

2.3. Maintenance Safety

  • Before cleaning or replacing the light bulb, turn off the power and allow the lamp to cool down (at least 30 minutes).
  • Do not rinse the lamp body directly with water. Use a dry or slightly damp soft cloth to wipe surface dust.
  • Do not use wet hands to plug/unplug power supplies or touch electrical parts.
  • Do not hang heavy objects (e.g., clothing, decorative ornaments) on the lighting fixture.
  • Do not use non-original accessories (e.g., power adapters, hanging chains).

3. Setup & Installation

This section outlines the steps for installing your pendant light. Ensure all safety warnings are read and understood before proceeding.

3.1. Prepare Tools

The following tools are typically required (not included):

  • Electric drill
  • Screwdriver (cross/straight)
  • Spirit level
  • Tape measure
  • Wire stripping pliers
  • Expansion screws (if your ceiling is concrete/gypsum board and not included in the package, please provide your own).

3.2. Installation Steps (Example: Ceiling-Mounted Chandelier)

  1. Fixed Installation Base:
    • Position the installation base on the ceiling.
    • Use a spirit level to calibrate and mark the screw hole positions.
    • Drill holes at the marked locations with an electric drill.
    • Insert expansion tubes (if applicable) and secure the base to the ceiling with screws to ensure no looseness.
  2. Connect the Wires:
    • Carefully peel off approximately 1cm of the outer insulation from the ceiling power cord and the lamp wires.
    • Connect the wires according to color correspondence:
      • Live Wire (L): Usually brown or red. Connect to the live wire of the lamp.
      • Neutral Wire (N): Usually blue or black. Connect to the neutral wire of the lamp.
      • Ground Wire (E): Usually yellow/green. Connect to the ground wire of the lamp. (If there is no ground wire, it can be ignored, but grounding is recommended for safety).
    • Wrap the connections with insulating tape to prevent short circuits.
  3. Fixing the Lamp Body and Debugging:
    • Align the lamp body with the installation base.
    • Rotate the buckle or use screws to tightly attach the lamp body to the base.
    • Install the light bulb (if it is a split type).
    • Turn on the main power switch and test if the light fixture illuminates normally.
    • If the light does not turn on, immediately turn off the power and check the wire connections for correctness.
Installed ZODOLAMP Ice Cube Lava Chandelier (Clear)
Example of an installed ZODOLAMP Ice Cube Lava Chandelier (Clear version).

4. Operating Instructions

Once installed, operate your ZODOLAMP Chandelier as follows:

  • Power On/Off: Use your room's standard light switch to turn the chandelier on or off.
  • Dimming (if applicable): If you have selected a 'three color dimming' bulb and your switch supports it, you may be able to cycle through different light temperatures (warm, neutral, cool) or dim the light by toggling the switch quickly. Refer to your bulb's specific instructions for dimming functionality.
Video demonstrating the ZODOLAMP Chandelier's appearance and light effect.

5. Maintenance

To ensure the longevity and appearance of your chandelier:

  • Cleaning: Turn off the power and allow the fixture to cool. Use a dry, soft cloth to gently wipe the glass and metal components. For stubborn dust, a slightly damp cloth can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents.
  • Bulb Replacement: Always turn off the power and allow the bulb to cool completely before attempting to replace it. Use only E27 LED bulbs within the specified wattage range.
  • Regular Checks: Periodically check the hanging mechanism and electrical connections for any signs of wear or looseness.

6. Troubleshooting

If you encounter issues with your chandelier, refer to the following common problems and solutions:

  • Light does not turn on:
    • Ensure the main power switch is on.
    • Check if the light bulb is correctly installed and not burnt out. Replace if necessary.
    • Turn off the power and re-check all wire connections as per the installation instructions. Ensure they are secure and correctly matched (Live, Neutral, Ground).
    • Verify that the circuit breaker for the lighting circuit has not tripped.
  • Light flickers:
    • Ensure the bulb is screwed in tightly.
    • Check for loose wire connections.
    • If using a dimmable bulb, ensure it is compatible with your dimmer switch (if any).
  • Chandelier appears unstable:
    • Turn off the power.
    • Check the firmness of the installation base and the hanging chain/suspension rod. Tighten any loose screws or nuts.

7. Specifications

Detailed technical specifications for the ZODOLAMP Ice Cube Lava Chandelier:

Feature Specification
Brand NameZODOLAMP
Item TypePendant Lights
StyleModern Style
MaterialFRP (Fiber Reinforced Polymer) / Glass
Installation TypeCord Pendant
Installation MethodAssembly
Is Bulbs IncludedYes
Light SourceLED bulbs
Base TypeE27
Number of Light Sources1
Power SourceAC
Voltage220 V
Luminous Flux249-2000 lumens
Is DimmableYes
Switch TypeKnob switch
Lighting Area5-10 square meters
Place of UseParlor, Study, Master Bedroom, other bedrooms, Hotel Hall, Hotel Room
Is Smart DeviceNo
High-concerned chemicalNone
OriginMainland China
CertificationsCCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE, EAC

Dimensions

Chandelier dimensions: 16cm height, 15cm width
Approximate dimensions of the chandelier: 16cm (Height) x 15cm (Width).

Note on Light Source: While product specifications indicate an E27 base for LED bulbs, some visual diagrams may show a G9 base. Please refer to the packaging and actual product for the definitive bulb type required for your specific model.

8. User Tips

  • Smart Bulb Compatibility: Yes, you can typically use your own smart E27 base bulb with this fixture, provided it fits physically and its wattage does not exceed the fixture's maximum rating. Ensure the smart bulb is compatible with your home's electrical system and any existing dimmer switches.
  • Adjusting Suspension Length: The length of the suspension rod/chain can be adjusted during installation to suit your ceiling height and aesthetic preference. Always ensure the fixed nut is securely locked after adjustment.
  • Crystal Accessories: After installation, double-check that any crystal accessories are firmly attached to prevent them from falling off.

9. Additional Resources & Support

For further details or specific inquiries, you may refer to the official user manual PDF:

A user manual (PDF) is available for this product. Please consult the seller's website or contact customer support for access to the document.

Manufacturer Contact: For technical support or warranty claims, please contact Zhongshan Kuzhimi Technology Co., Ltd. via the provided email: 3455975516@qq.com.

© 2024 ZODOLAMP. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.