CYCPLUS M2 Wireless GPS Bicycle Computer User Manual

1. Introduction

The CYCPLUS M2 is a smart GPS bike computer designed to track and display various cycling data. It features a 2.5-inch LCD screen, ANT+ and Bluetooth 5.0 connectivity for external sensors and app synchronization, and a robust waterproof design.

CYCPLUS M2 Bicycle Computer showing various data fields. Note: New and old versions may ship randomly.

2. Package Contents

Ensure all items are present in your package:

• CYCPLUS M2 GPS Bike Computer
• Bike Computer Mount
• Rubber Pad
• Type-C Charging Cable
• Rubber Band x 3
• Instruction Manual (this document)

Contents of the CYCPLUS M2 package.

3. Setup and Installation

3.1 Mounting the Device

1. Overlap the base and rubber mat.
2. Hang the rubber rings on the base.
3. Cross the rubber rings and secure them to the handlebars.
4. Rotate the M2 cycling computer into the base until it locks securely.

Installation steps for the bike computer mount.

3.2 Initial Power On and GPS Acquisition

1. Long press the L1 button (Play/Pause icon) to power on the device.
2. Wait for the GPS signal to connect. This may take a few minutes. The GPS icon will light up when connected.
3. Once connected, press the L1 button to start riding and recording data.

The device offers rapid 10-second positioning in open, unobstructed environments.

4. Operating Instructions

4.1 Button Description

• L1 Button (Left, Play/Pause icon): Short press to Start/Pause Recording. Long press to Power On/Off.
• L2 Button (Left, Circle icon): Short press to Count Lap. Long press to Save Record.
• R1 Button (Right, Arrow icon): Short press to Go to next page. Long press to Enter/Quit Settings.
• R2 Button (Right, Sun icon): Short press to Turn on/off Backlight.

4.2 Settings Overview

To access settings, long press the R1 button. Short press R1 to navigate through the setting pages (C1-C8). Use L1 to start setting, L2 to switch digits, and R1 to modify digits. Long press R1 to exit settings.

• C1: Brief Introduction
• C2: ANT+ Sensors Connection: Long press R1 to enter settings, short press R1 to C2. Press L1 to search for ANT sensors. Data will appear when connected. To unpair, switch to C9 page and press L1.
• C3: Wheel Circumference Setting: Long press R1 to enter settings, short press R1 to C3. Press L1 to start setting. Use L2 to switch setable digits and R1 to modify. Press L1 to finish.
• C4: Time Zone Setting: Long press R1 to enter settings, short press R1 to C4. Press L1 to start setting. Use R1 to modify the time zone. Press L1 to finish.
• C5: Speed Unit Setting: Long press R1 to enter settings, short press R1 to C5. Press L1 to start setting. Use R1 to switch between KMH and MPH. Press L1 to finish.
• C6: Temperature Unit Setting: Long press R1 to enter settings, short press R1 to C6. Press L1 to start setting. Use R1 to switch between °C and °F. Press L1 to finish.
• C7: Factory Reset: Long press R1 to enter settings, short press R1 to C7. Press L1 to start setting. Long press L2 to restore factory settings; the computer will turn off.
• C8: Odograph Setting: Long press R1 to enter settings, short press R1 to C8. Press L1 to start setting. Use L2 to switch setable digits and R1 to modify. Press L1 to finish.

The 2.5-inch large screen displays data at a glance, including various metrics.

5. App Connection and Data Sync

5.1 XOSS App Connection

Scan the QR code or search for "CYCPLUS Fit" (or XOSS app) on Google Play or the App Store to download the application. Register with your email and enable Bluetooth on your phone. In the app, select CYCPLUS M2, then click connect and choose your device from the found devices.

Scan the QR code to download the CYCPLUS Fit app for iOS or Android.

5.2 Sync to Strava/Training Peaks

You can sync activity ".Fit" files to Strava via Bluetooth 5.0. If Strava is connected to the app, data will automatically sync. You can sync 100km data in just 30 seconds.

6. Maintenance and Care

6.1 Battery and Charging

The M2 features a 1100 mAh 3.7 V battery, providing approximately 30-35 hours of endurance. Charging is done via a Type-C port and takes nearly 3.5 hours.

The M2 offers long battery endurance and charges via a Type-C port.

6.2 Waterproofing

The device has an IPX6 waterproof rating, meaning it is rain-proof and can withstand strong jets of water. However, it is not designed for prolonged immersion in water.

6.3 Auto Backlight and Awakening

The M2 features auto backlight and auto awakening. After 10 minutes of no displacement and no vibration, the device will enter hibernation. Move the device to wake it up. The backlight can also be manually turned on/off using the R2 button.

Auto backlight and awakening features for convenience.

7. Troubleshooting

• GPS Signal Issues: Ensure the device is in an open, barrier-free area and remains static for a few minutes after power-on to acquire a GPS signal.
• Sensor Connection Problems: If external sensors (speed, cadence, heart rate, power) are not connecting, ensure they are active and within range. Try re-searching for ANT+ sensors in the settings (C2). To unpair all sensors, switch to C9 page and press L1.
• Display Readability: While the screen is generally easy to read, some users report difficulty in direct sunlight with sunglasses or in very dark conditions without backlight. Adjust backlight settings (R2 button) as needed.
• Device Malfunction/Reset: If the device is not functioning as expected, a factory reset (C7 in settings) can restore default settings. Long press L2 in C7 to perform the reset.

8. Specifications

8.1 Tire Circumference Chart

Refer to the chart below for common tire sizes and their corresponding circumferences. This is crucial for accurate speed and distance readings. The tire size is usually shown on the side of your tire. Tire circumference may vary depending on tire pressure.

Tire Circumference Chart for accurate setup.

9. User Tips

• The M2 offers excellent battery life and precise data tracking.
• GPS acquisition is generally fast and accurate, especially in open areas.
• The device is easy to operate and the display is clear, though some users note challenges with readability in direct sunlight with sunglasses or in very dark conditions without backlight.
• Setup for ANT+ and Bluetooth devices is straightforward.
• The M2 functions independently for core features like speed and GPS tracking; phone connection is primarily for data synchronization.
• External sensors (heart rate, cadence, speed, power) are not included and must be purchased separately for advanced metrics.

10. Warranty and Support

10.1 Warranty

The CYCPLUS M2 comes with a 1-year warranty for free replacement or repair.

10.2 After-sales Support

For any after-sales inquiries or technical support, please contact us via email:

steven@cycplus.com