Logitech G703 LIGHTSPEED Wireless Gaming Mouse

1. Setup Instructions

The Logitech G703 LIGHTSPEED Wireless Gaming Mouse comes with a wireless receiver, a USB adapter, and an optional 10g weight. Follow these steps to set up your mouse:

1. Connect the Receiver: Plug one end of the provided cable into your PC. Plug the other end into the USB adapter and then connect the wireless receiver to the USB adapter. The receiver can also be plugged directly into your PC. However, using the cable and adapter in wireless mode is recommended for better connectivity and easy access for recharging.
2. Power On: Turn the mouse on using the switch located on the bottom of the mouse.

2. Operating the Mouse

Mouse Features

The G703 mouse is equipped with 6 programmable buttons and a DPI cycle button:

1. Left Click (Button 1)
2. Right Click (Button 2)
3. Wheel Click (Button 3)
4. Back (Button 4)
5. Forward (Button 5)
6. DPI Cycle Button

The On/Off switch and weight door are located on the bottom of the mouse and are not programmable.

Logitech Gaming Software (LGS)

You can customize the G703's three onboard profiles using the Logitech Gaming Software. These settings include surface tuning, button programming, lighting color, lighting effects, report rate, and tracking behavior. The G703 allows up to 5 DPI settings per profile.

By default, the G703 has one active onboard profile with the following settings:

• DPI: 400, 800, 1600, 3200
• RGB Lighting: Color cycle
• Report Rate: 1ms

3. Charging and Battery Life

Charging the Mouse

When the battery is low, plug the provided USB charging cable into the front of the mouse. The mouse will seamlessly switch to data-over-cable mode when connected to a PC. A full charge from empty takes approximately two hours when plugged into a PC USB port.

The G703 is also compatible with the Logitech G POWERPLAY wireless charging system, which is sold separately.

Battery Life and Indicators

The G703 features a rechargeable 720mAh LiPol battery. It provides up to 32 hours of non-stop gaming at a 1ms report rate with lights off, or 24 hours with RGB color cycling on.

You can check the charge level when the mouse is powered on, or by assigning a button in Logitech Gaming Software to check the charge level. The scroll wheel displays the charge level for seven seconds upon mouse power-on:

• Green: 50-100%
• Orange: 30-50%
• Red: 15-30%
• Flashing Red: Less than 15%

When the battery is at 15% or less, the scroll wheel will flash red. At this point, plug in your mouse to charge it. Detailed battery information, including charge level, power draw, and estimated remaining battery life, can be monitored in Logitech Gaming Software.

4. Maintenance and Troubleshooting

Tips for Optimal Performance

• Keep the mouse and receiver at least 2 meters away from wireless routers or other 2.4GHz wireless devices to minimize environmental noise and interference.
• The G703 has a wireless range of up to 10 meters. For optimal performance in noisy wireless environments and easy access to the charging cable, it is recommended to keep the receiver within 20 cm of the mouse.

User Tips

• The Logitech G703 is an original Logitech product from a certified brand.
• The product does include a rechargeable battery, contrary to some potential misunderstandings.

5. Specifications

6. Support and Additional Resources

For further questions, troubleshooting, or detailed information, please visit the official Logitech support page for the G703:

http://support.logitech.com/product/g703

An official user manual in PDF format is also available for download, providing comprehensive details on the product:

Download User Manual (PDF)