RACBOX 3.0 inch LED Bi-led Projector

Contents

RACBOX 3.0 inch LED Bi-led Projector Headlight Lens Instruction Manual

Model: 3.0 inch LED Bi-led Projector

Brand: RACBOX

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your RACBOX 3.0 inch LED Bi-led Projector Headlight Lens. Please read this manual thoroughly before use to ensure proper function and safety.

This product is an auxiliary accessory for automotive lighting, intended for the normal replacement and upgrade of original car lights. It is not designed for illegal modification or unauthorized use. The product meets relevant national automotive lighting industry standards and has undergone strict quality testing.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Specifications

Product dimensions and specifications diagram

Figure 1: Product dimensions and key specifications.

Attribute Value
Lens Size3.0 inch
Input VoltageDC 12V-15V
Power45W (Low Beam), 55W (High Beam)
Cut-off LineLHD/RHD (Left-hand-drive / Right-hand-drive)
Color Temperature6000K White
Light SourceTop 3570 Big LED Chip
Luminous Flux20000LM
Beam PatternHi-Lo Beam
Lens MaterialsHigh Clear HD Glass
Housing MaterialAluminum
Shrouds MaterialABS Plastic
Working Temperature-40°C to +85°C
Lifespan≥50000 Hours
Waterproof RatingIP67
FitmentUniversal kit for H4, H7, 9005, 9006 Headlights

4. Key Features

  • High Clear HD Lens: Features high clear convex glass for enhanced efficiency, powerful light output, and precise focusing.
  • Advanced LED Chips: Built-in 3570 LED chips deliver powerful light output and stable performance without any dark areas.
  • Bi-LED Functionality: A solenoid controls both high and low beam lights within each projector lens.
  • Digital Driver: Integrated LED drivers monitor fan speed for optimal heat protection and stable performance.
  • Efficient Cooling System: Equipped with a high-quality cooling fan and 6063 aluminum heat dissipation module to effectively lower temperature, ensuring stable light output and a long service life.
  • Long Lifespan: Designed for a long service life of up to 50,000 hours.
  • Easy Installation: Features a threaded-shaft design, allowing the projector to be securely mounted with included hardware. Compatible with H4, H7, 9005, and 9006 reflectors with minimal or no modifications.
  • Waterproof Design: IP67 rated for high performance in various weather conditions, including rain and snow.
High Clear HD Lens detail

Figure 2: High Clear HD Lens for superior light projection.

Customized Big Chip LED detail

Figure 3: Customized Big Chip LED for super bright illumination.

Cooling system diagram

Figure 4: Advanced cooling system with aluminum materials and fans.

Waterproof IP67 rating demonstration

Figure 5: IP67 waterproof design ensures durability in wet conditions.

5. Setup and Installation

Before beginning installation, ensure you have all necessary tools and that the vehicle's engine is off and the existing headlamp is cool to the touch.

Installation method diagram showing mounting bracket and universal thread shaft

Figure 6: Installation method highlighting compatibility with Hella lens mounting and universal thread shaft.

Installation Steps:

  1. Turn off the engine and ensure the lamp is cool.
  2. Disconnect the power connector of the original bulb.
  3. Remove the factory halogen bulb.
  4. Install the LED bulb into the headlight housing.
  5. Connect the LED driver and fix it properly.
  6. Reconnect the power and test the light function.
  7. Reassemble the headlight assembly.

Note:

  • If the light does not turn on after installation, please reverse the plug polarity.
  • The projector lenses are designed with a universal thread shaft, making them suitable for most H4, H7, 9005, and 9006 headlights.
  • The mounting bracket is designed to be similar to Hella lenses for easy replacement.
Wiring diagram for the Bi-LED projector lens

Figure 7: Wiring diagram showing connections for Low Beam and High Beam.

6. Operation

The RACBOX Bi-led Projector Headlight Lens offers both high and low beam functions. Once installed, operate your vehicle's headlight switch as usual to toggle between low and high beams.

Video 1: Product demonstration showing the Bi-LED projector lenses and their beam patterns.

LHD high and low beam patterns

Figure 8: Example of LHD (Left-Hand-Drive) high and low beam patterns.

LHD vs RHD cut-off comparison

Figure 9: Comparison of LHD (Left-Hand-Drive) and RHD (Right-Hand-Drive) cut-off lines.

LHD (Left-hand-drive): The car steering wheel is on your left hand, and you drive on the right side of the road (e.g., Russia, USA).

RHD (Right-hand-drive): The car steering wheel is on your right hand, and you drive on the left side of the road (e.g., UK, Australia, Japan).

7. Maintenance

To ensure optimal performance and longevity of your RACBOX LED Bi-led Projector Headlight Lenses, follow these maintenance guidelines:

  • Cleaning: Periodically clean the lens surface with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the lens material.
  • Inspection: Regularly inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure all connections are secure.
  • Cooling System: Keep the cooling fins and fan area free from dirt and debris to ensure efficient heat dissipation. Blocked airflow can lead to overheating and reduced lifespan.
  • Environmental Exposure: While the product is IP67 waterproof, prolonged exposure to extreme conditions or harsh chemicals should be avoided.

8. Troubleshooting

If you encounter issues with your headlight lenses, refer to the following common problems and solutions:

Problem Possible Cause Solution
Light does not turn on Incorrect wiring polarity. Loose connection. Faulty LED driver. Reverse the plug polarity. Check all connections. Test with a known good LED driver if available.
Dim or flickering light Insufficient power supply. Loose connection. Overheating. Ensure stable 12V-15V power. Check connections. Ensure proper ventilation around the cooling system.
High beam or low beam not working Solenoid malfunction. Wiring issue to the solenoid. Check wiring to the solenoid. If the issue persists, contact customer support.
Condensation inside the lens Improper sealing during installation. Extreme temperature changes. Ensure the headlight housing is properly sealed. Small amounts of condensation usually dissipate. If excessive, re-check seals.

If you are unable to resolve the issue using these steps, please contact customer support for further assistance.

9. User Tips

  • Compatibility Check: Always double-check your vehicle's headlight bulb type (H4, H7, 9005, 9006) before purchasing to ensure proper fitment.
  • Professional Installation: While designed for easy installation, professional installation is recommended for optimal performance and to avoid potential wiring issues.
  • Beam Pattern Adjustment: After installation, it is advisable to check and adjust the headlight beam pattern to ensure proper alignment and avoid dazzling oncoming traffic.

10. Warranty & Support

RACBOX Warranty information

Figure 10: RACBOX Warranty details.

Standard Warranty:

RACBOX represents and warrants to the first end-user ("End-User") of the Product that the Product shall materially conform to Racbox's published specifications in the user manual, subject to the terms and conditions below.

Warranty Period:

The Warranty Period for a new Product is ONE Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.

What is Covered:

The Standard Warranty provides support for Racbox ("Support") as well as replacement parts during the Warranty Period. Customers will be covered for replacement parts, partial refund, or full refund in the Warranty Period on any product due to manufacturing defects of components or workmanship.

What is Not Covered:

The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error and failure to follow instructions relating to Product's use.

How to Get Warranty Service:

If you are within our limited warranty and need to request a replacement part, please use the information below. We are here to help solve problems! If you have any other questions feel free to contact our customer support, either by phone, email, or through our Live Support system.

Contact Information:

  • Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd
  • Email: tdlaccount@126.com
  • EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
  • EU Representative Email: info@apex-ce.com

© 2024 RACBOX. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.