Canon QXNF4NB1402624

Contents

RC-6 Wireless Remote Control Shutter Release User Manual

Model: QXNF4NB1402624

Brand: Canon (Compatible Remote)

1. Introduction

This manual provides instructions for the safe and effective use of your RC-6 Wireless Remote Control Shutter Release. This infrared remote allows you to trigger your Canon EOS camera's shutter from a distance, reducing camera shake and enabling self-portraits or group shots. Please read this manual thoroughly before use and retain it for future reference.

RC-6 Wireless Remote Control
Figure 1: RC-6 Wireless Remote Control

2. Safety Information

  • Avoid Water: Do not expose the remote control to water or moisture.
  • Do Not Disassemble: Do not attempt to disassemble or repair the device yourself. Repairs should only be performed by qualified professionals.
  • Battery Safety: Ensure batteries are inserted correctly. Dispose of used batteries responsibly according to local regulations.

3. Package Contents

The package includes:

  • 1 x RC-6 Wireless Remote Control Shutter Release
RC-6 Remote Control in packaging
Figure 2: RC-6 Remote Control as packaged

4. Specifications

Feature Detail
Model Number QXNF4NB1402624
Type Wireless Infrared Remote Controller
Compatible Brand Canon
Operating Range Approx. 6-10 meters
Dimensions 60x28x7mm / 2.36x1.11x0.27inch
Certification NONE
High-concerned chemical None

Compatible Canon EOS Camera Models:

  • EOS 5D Mark II, EOS 5D MARK III
  • EOS 7D, EOS 6D
  • EOS 70D, EOS 60D
  • EOS 700D, EOS 650D, EOS 600D
  • EOS 550D, EOS 500D, EOS 450D
  • EOS 100D
  • And other Canon cameras with a built-in infrared receiver.

5. Setup

  1. Insert Battery: Ensure a working battery is correctly installed in the remote control.
  2. Prepare Camera:
    • Ensure your Canon EOS camera has a built-in infrared receiver.
    • Set your camera's drive mode to "Self-timer: 2sec/remote" or a similar remote control mode. This setting is crucial for the remote to function.
Canon camera screen showing drive mode set to Self-timer: 2sec/remote
Figure 3: Example of camera drive mode setting for remote control.

For a visual guide on camera setup, please refer to the product video:

Video 1: Product overview and demonstration of remote control functionality.

6. Operating Instructions

  1. Power On: The remote is always ready for use; there is no separate power button.
  2. Aim the Remote: Point the remote control directly at the infrared sensor on the front of your Canon camera. The sensor is typically a small, dark window on the camera body.
  3. Trigger Shutter:
    • Press the large circular button on the remote once for an immediate shutter release.
    • If your camera is set to a 2-second delay mode, pressing the button will trigger the shutter after a 2-second countdown.
  4. Operating Distance: The remote functions effectively within an approximate range of 6-10 meters from the camera.
Remote control being used with a Canon camera
Figure 4: Demonstrating the use of the remote with a Canon camera.

7. Maintenance

  • Cleaning: Wipe the remote with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Replacement: If the remote stops responding, replace the battery. Refer to the PDF user manual for specific battery type and replacement instructions if available.

8. Troubleshooting

Problem Possible Cause Solution
Remote not triggering shutter
  • Camera not in remote mode.
  • Remote not aimed correctly.
  • Out of range.
  • Dead or low battery in remote.
  • Camera's infrared receiver blocked.
  • Ensure camera drive mode is set to "Self-timer: 2sec/remote" or similar.
  • Point the remote directly at the camera's front infrared sensor.
  • Move closer to the camera (within 6-10m).
  • Replace the remote's battery.
  • Ensure nothing is obstructing the camera's IR receiver.
Remote works intermittently
  • Weak battery.
  • Interference.
  • Replace the remote's battery.
  • Ensure no strong infrared sources or bright lights are interfering.

9. User Tips

  • Always ensure your camera's drive mode is correctly set to "Self-timer/remote" for the remote to function.
  • Directly point the remote towards the camera's infrared sensor for reliable triggering.
  • If the remote isn't working, try replacing the battery before assuming it's faulty.

10. Frequently Asked Questions (FAQ)

Q: Does this remote work with all Canon cameras, like the D2000?
A: This remote is compatible with Canon EOS cameras that have a built-in infrared receiver. Please check your specific camera model's manual to confirm if it supports infrared remote control. The D2000 is not a standard Canon EOS model name, so compatibility cannot be confirmed without further information.

11. Warranty and Support

For any issues or support, please contact the manufacturer:

  • Manufacturer: Shenzhen Chiyi Technology Co., Ltd
  • Address: 401-43, Buildings 2 and 3, M-10, Maqueling Industrial Zone, Maling Community, Yuehai Street, Nanshan District, Shenzhen
  • Email/Tel: smtsykj@163.com / 17722493418

For additional information and detailed guides, you may refer to the official user manual PDF: View User Manual (PDF).

© 2023 All rights reserved. This manual is for informational purposes only.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.