1. Introduction
Thank you for choosing the Tuya Smart Ceiling Light. This smart LED ceiling lamp offers versatile lighting options with RGB, Warm White (WW), and Cool White (CW) capabilities, controllable via Wi-Fi or Zigbee protocols. It integrates seamlessly with popular smart home platforms like Tuya Smart Life, Amazon Alexa, and Google Assistant, providing convenient control over your home lighting.
2. Safety Information
- Always turn off the power at the circuit breaker before installation, removal, or maintenance.
- Ensure the voltage supply matches the product's requirements (85-265V).
- Do not attempt to disassemble or modify the light fixture.
- Keep the device away from water and high humidity environments.
- Installation should be performed by a qualified electrician if you are unsure.
3. Product Overview
The Tuya Smart Ceiling Light is available in two versions: a Wi-Fi version and a Zigbee version. Both offer full-color RGB lighting, adjustable white light from warm to cool, and voice control capabilities.

Figure 1: Tuya Smart Ceiling Light showcasing RGB colors and compatibility with Tuya, Amazon Alexa, Google Assistant, and Smart Life.
3.1. Connection Methods

Figure 2: Comparison of Wi-Fi and Zigbee versions of the ceiling light.
| Feature | Wi-Fi Version | Zigbee Version |
|---|---|---|
| Name | Wifi Ceiling Light | ZigBee Ceiling Lamp |
| Power | 24W | 24W |
| Voltage | 85-265V | 85-265V |
| Color | RGB + WW + CW = 24W | RGB + WW + CW = 24W |
| Type | 2.4GHz WiFi | Zigbee 3.0 |
| Voice Control | Yes | Yes |
| Connection | Directly via 2.4GHz WiFi (No Hub Required) | Through Zigbee Gateway (Gateway not included) |
4. Setup and Installation
4.1. Physical Installation
Before starting, ensure the power supply is turned off at the circuit breaker.
- Unpack the ceiling light and ensure all components are present.
- Mount the base plate securely to the ceiling using appropriate screws and anchors.
- Connect the live (L) and neutral (N) wires from your ceiling to the corresponding terminals on the light fixture.
- Attach the light fixture to the mounted base plate.
- Restore power at the circuit breaker.
For a visual guide on installation, please refer to the video below:
Video 1: Installation guide for the 24W Wi-Fi and Zigbee smart ceiling light.
4.2. Resetting the Light
To put the light into pairing mode (breathing state), perform the following power cycle:
- Turn the light ON.
- After 1 second, turn the light OFF.
- Wait for 3 seconds.
- Repeat steps 1-3 two more times (total of 3 ON/OFF cycles).
- On the third ON cycle, the light will start flashing rapidly, indicating it is in pairing mode.
4.3. Connecting to Smart Home Platforms
The light supports various smart home platforms. You can only connect to one Zigbee gateway at a time.
4.3.1. Tuya Smart Life App (Wi-Fi Version)

Figure 3: Wi-Fi version of the smart ceiling light, highlighting no hub is required for direct Wi-Fi connection.
- Ensure your Wi-Fi network is 2.4GHz. The light does not support 5GHz Wi-Fi.
- Perform the reset procedure (Section 4.2) to put the light into pairing mode.
- Open the Tuya Smart Life app on your smartphone.
- Tap the '+' icon or 'Add Device'.
- The app should automatically discover the new device. If not, select 'Lighting' and then 'Ceiling Light (Wi-Fi)'.
- Confirm the light is flashing rapidly and follow the in-app instructions to connect.
- Once connected, you can rename the device and assign it to a room.
4.3.2. Tuya Smart Life App (Zigbee Version with Tuya Gateway)
- Ensure your Tuya Zigbee Gateway is already connected to the Tuya Smart Life app.
- Perform the reset procedure (Section 4.2) to put the light into pairing mode.
- In the Tuya Smart Life app, navigate to your Zigbee Gateway.
- Tap 'Add subdevice'.
- Confirm the light is flashing rapidly and follow the in-app instructions to connect.
- Once connected, you can rename the device and assign it to a room.
4.3.3. Philips Hue Bridge
- Ensure your Philips Hue Bridge is connected and set up.
- Perform the reset procedure (Section 4.2) to put the light into pairing mode.
- Open the Philips Hue app.
- Go to 'Settings' > 'Light setup' > 'Add light'.
- The app will search for new lights. After a short while, your smart ceiling light should appear.
- Follow the app instructions to add and configure the light.
- To use with Amazon Alexa, enable the Philips Hue skill in the Alexa app.
4.3.4. Amazon Echo Plus / Echo Show (2nd Gen) / Echo Show 10
- Perform the reset procedure (Section 4.2) to put the light into pairing mode.
- Say,