1. Introduction
The LUXCEO P120S is a versatile RGB Tube Light designed for professional photography, video production, studio lighting, film sets, and stage applications. It features a wide color temperature range, full RGB+W spectrum, multiple control options including mobile app and DMX, and various special effects to enhance your creative lighting needs.
Video: LUXCEO P120S Product Introduction, showcasing various lighting effects and control methods.
2. Package Contents
Please check the box for the following items:
- 1 x P120S Light
- 1 x Power Cable
- 1 x Certification
- 1 x Instructions (User Manual)
- 1 x Power Adaptor
- 2 x Wire Rope
- 1 x Gimbal Frame
- 1 x RJ45 Interface Master-Slave Line
- 1 x Carry Bag
Image: All items included in the LUXCEO P120S package.
3. Product Overview
3.1 Control Panel
The P120S features an intuitive control panel for direct adjustments. Familiarize yourself with the buttons and display for easy operation.
Image: Close-up of the LUXCEO P120S control panel with buttons for CCT, HSI, FX, GEL, XY, BT, RGB, and DMX modes.
4. Setup
4.1 Powering On/Off
- Connect the power adaptor to the DC charging port on the light.
- Press and hold the power button on the control panel to turn the light on or off.
4.2 Mounting the Light
The P120S offers multiple mounting options for various scenarios:
- Gimbal Frame: Attach the light to the included gimbal frame for handheld use or mounting on a stand.
- Safety Cable: For secure overhead mounting, use the provided safety cable to prevent accidental drops.
- Cable Ties/Clips: Utilize cable ties or clips to attach the light to various structures or other lights.
Video: Demonstrating various mounting methods including safety cable, cable tie, and clips.
5. Operating Instructions
The P120S offers multiple control methods: on-board control, mobile APP (eLinks), and DMX control.
Image: Overview of the multiple control options: On-board Control, APP (eLinks), and DMX Control.
5.1 Mobile APP Control (eLinks)
The eLinks APP allows for comprehensive control over the P120S light via Bluetooth. It supports iOS, Android, and HarmonyOS systems.
- Download the APP: Scan the QR code provided in the manual or search for "eLinks" in your device's app store.
- Reset Bluetooth: On the light's control panel, navigate to the settings menu and select "Reset Bluetooth" (confirm with YES).
- Connect: Open the eLinks APP on your smartphone. The app will automatically search for available lights. Select your P120S from the device list to connect.
- Adjust Settings: Use the app interface to adjust color temperature, RGB colors, brightness, and activate various effects.
Image: LUXCEO New Smart APP (eLinks) interface, showing support for iOS, Android, and HarmonyOS, along with a QR code for download.
Video: Demonstrating Bluetooth reset and mobile app connection to control light settings.
5.2 CCT Mode (Correlated Color Temperature)
In CCT mode, you can adjust the color temperature from 2000K (warm) to 10000K (cool) and fine-tune with red and green tuning for precise white balance.
- Press the CCT button on the control panel.
- Use the rotary dial to adjust the color temperature.
- Adjust intensity (brightness) as needed.
Image: CCT mode showing broad color temperature range from 2000K to 10000K.
Video: Adjusting color temperature using the CCT mode on the device.
5.3 HSI Mode (Hue, Saturation, Intensity)
HSI mode allows you to select from 360 colors with saturation control, producing a myriad of color combinations.
- Press the HSI button on the control panel.
- Use the rotary dial to adjust Hue (0-360°), Saturation (0-100%), and Intensity (0-100%).
Image: HSI Mode interface showing controls for Hue, Saturation, and Intensity.
Video: Adjusting Hue, Saturation, and Intensity using the HSI mode on the device.
5.4 FX Mode (Special Effects)
The P120S includes 15 built-in special light effects and allows for DIY light effects. You can adjust frequency, brightness, and color to unlock more specific lighting as required.
- Press the FX button on the control panel.
- Use the rotary dial to select from effects like Breathing, Warning, Flash, TV, Paparazzo, Flame, Party, Bad Bulb, Fireworks, Welding, SOS, Color Cycle, CCT Cycle, Flicker, Music Rhythm.
- Adjust parameters for the selected effect as desired.
Image: FX Mode displaying 15 built-in special light effects.
Video: Changing special effects using the FX mode on the device.
5.5 Gel Mode
The Gel mode provides 13 built-in standard color filters for the film industry, eliminating the need for additional physical color filters.
- Press the GEL button on the control panel.
- Use the rotary dial to select from various gel filters (e.g., 1/8 CTB, 1/4 CTO, Full CTB, Double CTO).
- Adjust intensity (brightness) as needed.
Image: Gel Mode showcasing 13 built-in standard color filters.
Video: Choosing and adjusting gel filters on the device.
5.6 X.Y. Coordinate Mode
This mode allows users to precisely set the X and Y coordinates and brightness to produce a particular color from millions of options. It also includes four dimming curves (exponential, logarithmic, S, linear) for fine-tuning brightness change speed.
- Press the XY button on the control panel.
- Use the rotary dial to set the X and Y coordinates.
- Adjust intensity (brightness) as needed.
Image: X.Y. Coordinate Mode showing X and Y color selection and various dimming curves.
Video: Setting X and Y coordinates on the device for precise color selection.
5.7 Online Mode (Master-Slave / DMX Control)
The P120S supports DMX control and a master-slave control mode via RJ45 in/out ports, allowing you to control up to 32 lights simultaneously.
- Connect Lights: Use RJ45 cables to connect multiple P120S lights.
- Designate Master: On one light's control panel, navigate to "Online Mode" settings and set it as "Master".
- Set Slaves: For other connected lights, set them to "Slave Mode"; they will mimic the Master's settings.
- DMX Control: Connect a DMX controller to the Master light via the DMX port for advanced control of multiple units.
Image: Group Control setup showing RJ45 in/out ports for DMX and master-slave control.
Video: Setting up Online Mode (Master/Slave) and connecting multiple lights via RJ45.
5.8 Music Mode
The P120S is equipped with a microphone hole that allows the light's color and rhythm to change in sync with music or voice, creating dynamic visual effects.
Video: Lights syncing up with music in Music Mode.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the light's surface. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the light in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, fully charge the light before long-term storage and recharge it every 3 months if not in regular use.
- Avoid Impact: Protect the light from drops and impacts, which can damage internal components.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Low battery or power adapter issue. | Ensure the light is fully charged or connected to a working power adapter. Check power cable connections. |
| Cannot connect via eLinks APP. | Bluetooth not reset or out of range. | Reset Bluetooth on the light's control panel. Ensure your smartphone is within Bluetooth range. Restart the app. |
| DMX control not working. | Incorrect DMX settings or cable connection. | Check DMX cable connections. Verify DMX address settings on the light and controller. Ensure one light is set as Master if using master-slave. |
| Light effects are not changing. | Incorrect mode selected or parameters not adjusted. | Ensure you are in the correct mode (e.g., FX, HSI) and adjust the relevant parameters using the control panel or app. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | P120S |
| Lighting Type | RGB Video Light |
| Color Temperature Range | 2000K - 10000K |
| Brightness Adjustment Range | 0 - 100% |
| Max Power | 30W |
| Max Brightness | 3000LM |
| CRI (Color Rendering Index) | RA > 95 |
| TLCI (Television Lighting Consistency Index) | > 97 |
| Battery | 14.8V / 5200mAh (Built-in Lithium Battery) |
| Power Source | DC 20V/1.8A (Max) |
| Inbox Adaptor | Yes |
| Light Effect Modes | 15 kinds (FX Mode) |
| Control Options | On-board, Mobile APP (eLinks), DMX |
| Product Size | 113 x 4.3 x 4.3 cm |
| Weight | 1.1 kg |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
Image: Visual representation of CRI > 95 and TLCI > 97, indicating high color accuracy.
9. User Tips
- For quick and dynamic scene changes, utilize the eLinks mobile app. Its intuitive interface makes adjusting colors and effects on the fly very efficient.
- When using multiple lights, setting up a master-slave configuration via RJ45 cables can streamline your workflow and ensure synchronized lighting.
- Experiment with the X.Y. Coordinate mode and its dimming curves to achieve unique and precise color transitions for cinematic effects.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official user manual PDF or contact LUXCEO customer service.
The full user manual (PDF) can be accessed here.