ShangDeLi Dual USB QC3.0 Type C Car Charger

Contents

Dual USB QC3.0 Type C Car Charger Instruction Manual

Model: Universal Dual USB QC3.0 Type C Car Charger

1. Product Overview

This product is a Dual USB QC3.0 Type C Car Charger designed for universal automotive use, providing fast charging capabilities for various devices. It integrates seamlessly into compatible vehicle models, replacing a blank button panel or existing cigarette lighter socket.

Product Name

Car Charger Socket

Basic Specifications

Feature Specification
Input Voltage DC 12V-24V
Output Parameters DC 5V/3A, 9V/2A, 12V/1.5A
Rated Power 18W (Max)
Charging Type Fast Charging (QC3.0)
Material Flame-retardant ABS + Pure Copper Core
Working Temperature -10°C to 60°C
Fitment Universal for 12V-24V cars, trucks, SUVs, vans, RVs (e.g., Toyota Camry, Land Cruiser, RAV4, Corolla)
Item Type Cables, Adapters & Sockets
Shell Color Black
Backlight Color Blue

Product dimensions: 3.3cm height, 6.2cm depth, 2.3cm width Figure 1: Product dimensions (Height: 3.3cm, Depth: 6.2cm, Width: 2.3cm)

Product with 120cm wiring harness Figure 2: Product with 120cm wiring harness

2. Safety Instructions (WARNING!)

  • For automotive use only. Read and follow these instructions carefully to avoid fire, electric shock, or damage to the product and connected devices.
  • Do not use in wet, humid environments or under rain to prevent short circuits and electric shock.
  • Do not disassemble, repair, or modify the product yourself; unauthorized operation may cause safety hazards.
  • Do not touch the product or its ports with wet hands when in use.
  • Keep away from children and pets; small parts may cause choking hazards, and improper use may lead to burns or electric shock.
  • Do not connect devices that exceed the rated power (18W) of the adapter, otherwise, it may cause overheating, short circuit, or damage to the product and devices.
  • Do not use the product while driving if it distracts your attention; ensure driving safety first.
  • Do not expose the product to direct sunlight for a long time or place it in high-temperature environments (above 60°C) to prevent material deformation or internal component damage.
  • This product is for automotive use only, not for household or other non-automotive scenarios.

3. Setup and Installation

I. Core Preparation (Vehicle-Specific Adaptation)

Tools Required:

  • 2 plastic pry bars (for removing the button panel)
  • Phillips screwdriver
  • Cable ties
  • Clean towel (to prevent scratches on interior trim)

Safety Precautions: Turn off the vehicle engine and set the key to the LOCK position before beginning installation.

II. Step-by-Step Installation Procedure

Step 1: Remove the Original Blank Button Panel (Key Positioning)

  1. Wrap a plastic pry bar with a clean towel and insert it into the gap of the blank panel.
  2. Gently pry outward until the panel's clips pop out. Grasps the panel edges firmly and pull it out smoothly (avoid excessive force to prevent damage to surrounding trim).
  3. If there are pre-installed clip posts on the blank panel, break them off gently with your fingernails or a small screwdriver (to fit the socket's clip-free base).

Step 2: Power Plug Connection (Non-Destructive Parallel Connection, Core Step)

  1. Locate the cigarette lighter (usually in the storage compartment in front of the gear shift lever). Use a pry bar to gently remove the cigarette lighter trim and pull out the cigarette lighter assembly.
  2. Unplug the white power plug from the back of the cigarette lighter assembly.
  3. Connect the white female plug with a branch on the modification wiring harness to the cigarette lighter assembly.
  4. Plug the original white plug into the white male plug of the modification wiring harness. This forms a parallel circuit: Original Vehicle Harness → Modified Socket → Original Cigarette Lighter (ensures both the original cigarette lighter and new socket work simultaneously without function loss).

Step 3: Wiring & Socket Fixation (Hidden Wiring)

  1. Wiring Route: Route the modification harness from the cigarette lighter along the bottom of the gear shift boot → gaps inside the center console → rear of the button panel. Align it with the original vehicle harness and avoid blocking the gear shift travel.
  2. Socket Installation: Align the dual charging sockets (USB/Type-C) with the removed blank button slot. Push the sockets outward from inside the center console until you hear a "click" (indicates the clips are fully engaged, matching the feel of original buttons).
  3. Harness Organization: Secure the modification harness to the original center console harness with cable ties (1 tie every 15-20 cm). Keep it away from air conditioning ducts and sharp metal edges to prevent abnormal driving noise or harness abrasion.

Car charger with wiring harness and an example of in-car installation showing blue backlight Figure 3: Product with wiring and example of in-car installation

Installed car charger showing blue backlight and voltage display Figure 4: Installed car charger with blue backlight and voltage display

Step 4: Power Test & Interior Reassembly

  1. Function Test: Turn the key to the ACC position. Plug a phone into the USB and Type-C ports respectively to confirm normal charging; test the original cigarette lighter to verify the parallel circuit works.
  2. Detailed Inspection: Touch the plug connections to ensure no overheating or unusual odors. Confirm the sockets are flush with the panel (no looseness) and do not interfere with gear shifting.
  3. Final Reassembly: Press the edges of the button panel firmly to reset all clips. Wipe the interior trim with a clean towel to complete the installation.

III. Vehicle-Specific Notes

  • Power Adaptation: The total power of the dual charging sockets should not exceed 60W (avoid connecting high-power on-board devices simultaneously).
  • Anti-Rattle Measure: If the sockets are slightly loose after installation, attach a thin layer of foam tape to the socket sides to enhance fixation and eliminate rattling.

4. Operating Instructions

Once installed, the car charger operates automatically when the vehicle's ignition is in the ACC position or running. Simply connect your USB-A or USB-C compatible device to the corresponding port for fast charging. The integrated blue backlight and voltage display provide visual confirmation of operation and current vehicle voltage.

  • Connect your device's charging cable to either the USB-A (QC3.0) or USB-C port.
  • Ensure your vehicle's ignition is on (ACC or engine running) for power delivery.
  • The blue backlight indicates the charger is powered, and the digital display shows the input voltage.

5. Maintenance

  • Keep the charger ports free from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid using harsh chemicals or abrasive cleaners on the product.
  • Regularly check the wiring for any signs of wear or damage, especially if the vehicle experiences vibrations.
  • Ensure all connections remain secure to prevent intermittent power or damage.

6. Troubleshooting

  • No Power/Charging:
    • Ensure the vehicle's ignition is in the ACC position or the engine is running.
    • Check all wiring connections for tightness. A loose wire can prevent power delivery.
    • Verify that the original cigarette lighter (if connected in parallel) is functioning.
    • Inspect the vehicle's fuse for the cigarette lighter circuit; a blown fuse will cut power.
  • Slow Charging:
    • Ensure your device supports Quick Charge (QC3.0) for optimal speeds.
    • Check your charging cable; a damaged or low-quality cable can limit charging speed.
    • Avoid connecting multiple high-power devices simultaneously if the total power exceeds 60W.
  • Overheating/Unusual Odors:
    • Immediately disconnect all devices and turn off the vehicle.
    • This indicates a potential overload or short circuit. Do not use the product until the issue is identified and resolved.
    • Ensure connected devices do not exceed the rated 18W per port or 60W total.
  • Loose Fit/Rattling:
    • If the charger feels loose in the panel, remove it and apply a thin layer of foam tape to the sides before re-inserting to enhance fixation.
    • Ensure all clips are fully engaged during installation.
  • Internal Component Issues (e.g., erratic voltage display, faceplate detaching):
    • If internal components appear loose or detached, or if the faceplate separates, professional repair may be required. Attempting to re-solder or re-glue components should only be done by individuals with appropriate technical skills and understanding of electronics.

7. User Tips

  • This charger has been reported to fit perfectly in various Toyota models (e.g., 2013 Corolla, 2008 RAV4) and Mitsubishi L200 (2019).
  • For optimal charging, ensure your device and cable are compatible with Quick Charge 3.0.
  • If you experience loose wiring, re-crimping or securing connections can resolve the issue.
  • The compact design makes it convenient for use and portability.
  • Consider reinforcing the faceplate or internal connections with a strong adhesive if it feels unstable, especially if frequently plugging/unplugging cables.

8. Frequently Asked Questions (FAQ)

Q: What is the size of this product?
A: The product dimensions are approximately 3.3cm (height) x 6.2cm (depth) x 2.3cm (width). It is designed to be compact and convenient.
Q: What is the functionality of this product?
A: This product serves as a dual USB (USB-A QC3.0 and USB-C) car charger, adapter, and socket, offering versatile functionality for various charging needs in your vehicle.
Q: Is this product durable and long-lasting?
A: Yes, this product is designed with flame-retardant ABS and a pure copper core for durability and reliable performance over time.
Q: Is this product compatible with most devices?
A: Yes, it is designed to be compatible with a wide range of USB-A and USB-C devices that support 5V/3A, 9V/2A, or 12V/1.5A charging, ensuring versatility and convenience.

9. Warranty and Support

For specific warranty information, please refer to the seller or your purchase documentation. If you encounter any issues or require technical assistance, please contact the retailer or manufacturer directly.

Additional item guides and documents, including a user manual in PDF format, may be available from the seller. You can typically find these resources on the product's purchase page or by contacting customer support.

A PDF version of the user manual is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.