MANUALS+

Adult content warning

RETEKESS TD167F Wireless Pager System User Manual

Why this warning: This page discusses adult sexual products and may include explicit descriptions or images.

Leave this page

RETEKESS TD167F

Contents

RETEKESS TD167F Wireless Pager System User Manual

Applicable to TD167A/TD167F Models

1. Introduction

The RETEKESS TD167F Wireless Pager System is an intelligent queue management solution designed to streamline service in various environments such as restaurants, cafes, food trucks, bars, and hotels. This system allows for efficient paging and calling, enhancing customer experience and operational flow. It supports multiple pagers and offers various customizable features.

RETEKESS TD167F Intelligent Queue Management System
Figure 1: RETEKESS TD167F Intelligent Queue Management System Overview

2. Safety Information

Before using this device, please read all safety instructions carefully to ensure safe operation and compliance with applicable standards.

2.1 RF Energy Exposure and Product Safety Guide

This device uses electromagnetic energy in the radio frequency (RF) spectrum. Improper use can cause biological damage. Please refer to the following guidelines:

  • Do not modify or adjust the device without authorization. Unauthorized modifications may void your authority to operate the radio.
  • Ensure the radio operates with an antenna of the type and gain approved by the manufacturer.
  • Transmit no more than 50% of the rated duty factor time.
  • Reduce the amount of time spent using your wireless device to minimize RF exposure.
  • This radio is designed for "General population/uncontrolled use".

2.2 Electromagnetic Interference/Compatibility

Nearly every electronic device is susceptible to electromagnetic interference (EMI). To avoid interference with other devices or systems, turn off the radio in areas where signs are posted to do so, such as hospitals or healthcare facilities.

2.3 Protect Your Hearing

  • Use the lowest volume necessary for your job. Turn up the volume only if you are in noisy surroundings.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Use carefully with the earphone; excessive sound pressure from earphones and headphones can cause hearing loss.

2.4 Battery and Charging Safety

  • Turn off your radio before charging.
  • Batteries shall be charged at 10°C~40°C environment temperature. Charging is prohibited if the temperature is below 0°C.
  • Rechargeable batteries need to be charged with a dedicated charger provided for each piece of equipment before first use.
  • Rechargeable batteries are only to be charged by adults or by children at least 8 years old under adult supervision.
  • Pull by the plug rather than the cord when disconnecting the charger.
  • Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
  • Do not use the charger outdoors or in moist environments; use only in dry locations/conditions.
  • Do not disassemble the charger, which may result in a risk of electrical shock or fire.
  • Do not operate the charger if it has been broken or damaged in any way.
  • An extension cord should not be used unless absolutely necessary. If used, ensure it is properly wired and in good condition, and the pins match the charger's plug.
  • Make sure the cord is located so it will not be stepped on, tripped over or subjected to damage or stress.

2.5 Choking Hazard

WARNING: CHOKING HAZARD - Small Parts. Not suitable for children under 3 years old.

3. Specifications

The following table details the technical specifications for the TD167F system:

ComponentParameterSpecification
Transmitter (Keyboard Host)Appearance size170*297*30 mm
PowerDC 12V/2A
Frequency433.92MHz
Modulation methodFSK
Working distance800 meters (open air)
Pager (TD167R)SizeDiameter: 80mm * Height: 11.5mm
Frequency433.92MHz
Prompting modeVibrate, Beep, Flashing
Standby timeAbout 25 hours
BatteryBuilt-in 300mAh lithium battery
Smart Box (TD167S)Modulation methodFSK
SystemAndroid 7.0
RAM1G
Remote control methodInfrared receiver
Dimensions of Keyboard Host and Pagers
Figure 2: Dimensions of Keyboard Host and Pagers

4. Setup Instructions

4.1 Keyboard Host (Transmitter) Setup

  1. Power On: Connect the power adapter to the keyboard host. After charging the base, it will power on automatically.
  2. One-Key Pager Pairing:
    • Place the pager into the independent coding slot on the keyboard host.
    • Enter the desired pager number (1-998) on the numeric keypad.
    • Press the 'P' key to perform one-click pairing.
    • A long beep from the keyboard base and flashing/beeping from the pager indicate successful pairing.
    Video: Demonstrates power on, one-key pairing, and calling a pager.
  3. Setting Base ID (F1):
    • Plug all pagers back into the charging base.
    • Press 'CALL' and 'DELETE' buttons simultaneously to enter the system menu.
    • Enter '1' to select F1.
    • Enter the desired ID number (1-99) for the base.
    • Press 'CALL' to save. The keyboard base will beep and the pager will flash/beep if successful.
    • Press 'DELETE' to exit the menu.
  4. Setting Channel (F9):
    • Plug all pagers back into the charging base.
    • Press 'CALL' and 'DELETE' buttons simultaneously to enter the system menu.
    • Enter '9' to select F9.
    • Enter the desired channel (1-31).
    • Press 'CALL' to save. The keyboard base will beep and the pager will flash/beep if successful.
    • Press 'DELETE' to exit the menu.
  5. Setting Extension and Smart Box (F10):
    • Plug all pagers back into the charging base.
    • Press 'CALL' and 'DELETE' buttons simultaneously to enter the system menu.
    • Enter '10' to select F10.
    • Enter '0' for off or '1' for on.
    • Press 'CALL' to save. The keyboard base will beep and the pager will flash/beep if successful.
    • Press 'DELETE' to exit the menu.
    • Note: The Smart Box uses a fixed channel (channel 1). If using the Smart Box, ensure the keyboard host is also set to channel 1.

4.2 Smart Box (TD167S) Setup (Optional)

If you have the optional Smart Box (TD167S), follow these steps for initial setup:

  1. Hardware Connection:
    • Install the antenna on the Smart Box.
    • Connect the Smart Box to an external display via the HDMI interface.
    Smart Box components and connections
    Figure 3: Smart Box Components (Smart Box, Remote Control, HDMI Cable)
  2. Initial Configuration:
    • After powering on the Smart Box, connect to Wi-Fi (if not a standalone version).
    • Select the desired language type on the screen using the remote control.
    • Ensure the F10 function on the keyboard host is turned on (refer to section 4.1, point 5).
  3. Smart Box Pager Pairing:
    • Access the "Code pair" menu on the Smart Box.
    • Enter any number (except "0") on the keyboard host and press the 'CALL' key to complete the code entry. The Smart Box identifies pagers via their keyboard ID.
    • You can also pick up a pager, and its ID will be automatically matched.
    • Configure Window Name, Group Name, and Type (Call or Queue) as needed.
    Smart Box Personalized Voice Options with Multilingual Support
    Figure 4: Smart Box Interface for Personalized Voice Options and Multilingual Support
  4. Function Settings (Smart Box):
    • Press the 'MENU' button on the remote control to enter the main settings interface.
    • Navigate through Basic settings, Screen interface selection, Code pair settings, Voice settings, System settings, and other functions.
    • To update firmware, select 'Check updates'. You may need to uninstall old versions and install new APK files via USB.
    Smart Box Customized Functions
    Figure 5: Smart Box Customized Functions (Voice Broadcast, Calling Page Layout, Subtitles, Advertising Breaks)

5. Operating Instructions

5.1 Calling a Pager

  1. Remove the configured pager from the charging base.
  2. Enter the pager number on the numeric keypad of the keyboard host.
  3. Press the 'CALL' button. The pager will vibrate, beep, or flash according to its settings.
Video: Demonstrates calling a pager.

5.2 Adjusting Pager Prompt Modes

The system offers multiple prompt modes (beep, vibration, flashing light) and customizable settings for each.

Multiple Pager Prompt Modes
Figure 6: Pager Prompt Modes (Buzzer, Flash, Vibration)
  1. Accessing Setting Menu: Press the 'CALL' and 'DELETE' buttons simultaneously on the keyboard host to enter the system menu.
  2. Setting Prompt Duration (F2):
    • Select F2 in the setting menu.
    • Enter the desired prompt duration (0-250 seconds). '0' means unlimited.
    • Press 'CALL' to save and 'DELETE' to exit.
  3. Setting Prompt Mode (F3 - Sound):
    • Select F3 in the setting menu.
    • Enter '0' for off, '1' for slow speed, '2' for medium speed, or '3-9' for fast speed.
    • Press 'CALL' to save and 'DELETE' to exit.
  4. Setting Vibration Prompt (F4 - On/Off):
    • Select F4 in the setting menu.
    • Enter '0' for off or '1-9' for on.
    • Press 'CALL' to save and 'DELETE' to exit.
  5. Setting Light Prompt (F5 - Mode):
    • Select F5 in the setting menu.
    • Enter '0' for off, '1' for slow flashing, '2' for fast flashing, or '3-9' for breathing light.
    • Press 'CALL' to save and 'DELETE' to exit.
  6. Setting Countdown Time (F6):
    • Select F6 in the setting menu.
    • Enter the desired countdown time (0-999 minutes). '0' disables the countdown.
    • Press 'CALL' to save and 'DELETE' to exit.
  7. Setting Out of Range Alarm (F7 - On/Off):
    • Select F7 in the setting menu.
    • Enter '0' for off or '1-9' for on.
    • Press 'CALL' to save and 'DELETE' to exit.
    • Note: If enabled, the base transmits a synchronization signal every 30 seconds. If a pager leaves the 800m/2625ft range, it will trigger an alarm.
    Pager Out of Range Alarm
    Figure 7: Pager Out of Range Alarm
  8. Setting Base Beep (F8 - On/Off):
    • Select F8 in the setting menu.
    • Enter '0' for off or '1-9' for on.
    • Press 'CALL' to save and 'DELETE' to exit.

5.3 One-Key Shutdown for All Pagers

To power off all pagers simultaneously:

  1. Ensure all pagers are placed in the charging base.
  2. Enter '999' on the numeric keypad.
  3. Press the 'CALL' button. All pagers will power off and no longer receive signals.
One-Key Shutdown for Pagers
Figure 8: One-Key Shutdown (Enter 999 + CALL)

6. Maintenance

6.1 Charging Pagers

  • Place pagers into the charging slots on the keyboard host.
  • The indicator light on the pager will flash while charging.
  • A solid indicator light means the pager is fully charged.
  • Pagers have a built-in 300mAh lithium battery, providing about 25 hours of standby time.
Pager Long Standby Time
Figure 9: Pager Battery and Standby Time

6.2 Cleaning

  • The touch keyboard is easy to clean.
  • Use a soft, dry cloth to wipe down the keyboard host and pagers.
  • Avoid using harsh chemicals or abrasive materials.

6.3 General Precautions

  • Do not touch the touch button panel when the base is powered on during the initial boot animation to prevent malfunction.
  • The system has a 5% time error; configure relevant time durations reasonably based on actual usage.
  • Ensure all pagers are properly seated in the charging slots.

7. Troubleshooting

ProblemPossible CauseSolution
Pager not responding to callPager is out of range, not paired, or battery is low.
  • Ensure pager is within the 800m/2625ft working distance.
  • Verify pager is correctly paired (refer to section 4.1, point 2).
  • Place pager on charging base to ensure it is charged.
Buttons on keyboard host malfunctionTouch panel touched during boot animation.Avoid touching the touch button panel during power-on and initial boot animation. Wait 1 second after boot animation ends before use.
Configuration (pairing, settings) failsInterrupted process or incorrect input.Wait for the pager to prompt successful configuration. If no prompt, retry the configuration process. Ensure correct parameters are entered.
Inaccurate timing for countdown/remindersSystem time error.The system has a 5% time error. Adjust the relevant time durations (e.g., countdown) reasonably based on actual usage and observed deviation.
Smart Box not displaying correctly or connectingIncorrect connections or settings.
  • Ensure antenna is installed and HDMI is connected.
  • Verify Wi-Fi connection (if applicable).
  • Check F10 setting on keyboard host is enabled.

8. User Tips

  • The pager buttons feature capacitive touch for sensitive and responsive input.
  • The system boasts a long working distance of up to 800 meters in open air, providing extensive coverage for various venues.
  • The charging stand is efficiently designed with 20 charging slots and 1 dedicated coding slot, allowing for simultaneous charging and easy pairing of multiple pagers.
  • Pagers are equipped with a built-in 300mAh lithium battery, offering approximately 25 hours of standby time on a full charge.
  • For optimal performance and to avoid interference, ensure the Smart Box (TD167S) is used with compatible TD167A/TD167F models, as indicated in the manual.

9. Warranty and Support

9.1 Guarantee Information

This product typically comes with a two-year manufacturer's warranty from the date of purchase. Please retain your guarantee card and proof of purchase for any warranty service.

For warranty service or after-sales support, please contact the seller where you purchased the product or a local repair center.

9.2 Exclusions from Warranty Coverage

  • Any product damaged by accident.
  • Damage resulting from misuse, abuse, unauthorized alterations, or repairs.
  • If the serial number has been altered, defaced, or removed.

9.3 Contact Information

For further assistance, repairs, or a list of approved accessories, please visit the official RETEKESS website: www.retekess.com

© 2024 RETEKESS. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.