1. Product Overview
The DD0403MA is a compact DC-DC step-down converter module designed to provide stable 3V or 3.3V output from an input voltage range of 3.2V to 6V. It features low power consumption, high accuracy, and an ultra-small form factor, making it suitable for various portable and embedded applications.
Video: DD0403MA Product Overview
2. Important Safety Information
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
3. Setup and Wiring
3.1 Before First Use
- Visually inspect the module for any physical damage.
- Ensure all connections are clean and free from debris.
3.2 Wiring Instructions
The module has three pins: Vi (Input Voltage), G (Ground), and Vo (Output Voltage). Ensure correct polarity when connecting.
Figure 1: Wiring Diagram for 3V Output Configuration
- Input VCC (Vi): Connect to your DC input voltage source (3.2V-6V).
- Input GND (G): Connect to the ground of your input voltage source.
- Output VCC (Vo): This will provide the regulated 3V output.
- Output GND (G): Connect to the ground of your load.
Figure 2: Wiring Diagram for 3.3V Output Configuration
- Input VCC (Vi): Connect to your DC input voltage source (3.5V-6V).
- Input GND (G): Connect to the ground of your input voltage source.
- Output VCC (Vo): This will provide the regulated 3.3V output.
- Output GND (G): Connect to the ground of your load.
4. Operating Instructions
The DD0403MA module functions as a voltage step-down converter. Once correctly wired, it will provide a stable output voltage.
4.1 Important Operating Considerations
- Input Voltage Range: Ensure your input voltage does not exceed the maximum specified range (6V).
- Output Current: Do not exceed the maximum continuous output current of 300mA (400mA for short durations) to prevent damage to the module.
- Power Consumption: The input power must always be greater than the output power, as the module itself consumes a small amount of power.
- Load Management: Avoid connecting loads that draw current beyond the module's capabilities.
5. Maintenance
- Storage: When not in use, store the module in a dry place, away from direct sunlight and extreme temperatures.
- Cleaning: If necessary, gently clean the module with a dry, soft cloth. Do not use liquids or solvents.
- Handling: Handle the module by its edges to avoid touching the electronic components directly.
- Children: Keep the module away from children.
6. Troubleshooting
- No Output Voltage:
- Check if the input voltage is within the specified range.
- Verify all wiring connections for correct polarity and secure contact.
- Ensure the input power source is active and providing sufficient current.
- Incorrect Output Voltage:
- Confirm the input voltage is stable and within the module's operating range.
- Check if the load connected is drawing excessive current, causing voltage drop.
- Module Overheating:
- Reduce the load current to ensure it is within the module's maximum continuous rating.
- Verify that the input voltage is not excessively high, leading to higher power dissipation.
7. Specifications
Figure 3: Key Specifications Summary
| Feature | Specification |
|---|---|
| Model Number | DD0403MA |
| Type | DC/DC Converters (LDO DC-DC) |
| Input Voltage (3V Output) | DC 3.2V - 6V |
| Input Voltage (3.3V Output) | DC 3.5V - 6V |
| Output Voltage | DC 3V / 3.3V (Single Output) |
| Output Current (Long Time Max) | 300mA |
| Output Current (Short Time Max) | 400mA |
| Voltage Accuracy | ±2% |
| Quiescent Current | 8µA |
| Short Circuit Current | 30mA |
| Over Current Protection | 500mA |
| Operating Temperature | -25℃ to +85℃ |
| Dimensions (L x W x H) | 11.6 x 7.8 x 2.5mm |
| Weight (with pins) | 0.5g |
| Weight (no pins) | 0.3g |
Figure 4: Module Dimensions and Weight (with and without pins)
8. User Tips
- This module is ideal for projects requiring a compact and lightweight power solution.
- It works well with small 3.7V batteries, making it suitable for portable devices.
- Consider using this converter in solar-based projects where a stable 3V or 3.3V output is needed from a variable solar input (within the specified range).
- Its small size makes it a great value for integrating into tight spaces on PCBs or breadboards.
9. Warranty and Support
For any technical support, troubleshooting assistance, or warranty inquiries, please contact your seller directly. Please provide your purchase details and a clear description of the issue for prompt assistance.
Manufacturer: Guangzhou Keshen Electronic Technology Co., Ltd