1. Product Overview
The Prelingcar 12.3-inch LCD Digital Dashboard Cluster is a high-definition replacement for your vehicle's original instrument panel. It features a Linux operating system for stable performance, a 1920x720 resolution screen, and supports wireless casting for navigation and music. It also offers 30 ambient lighting colors to enhance your driving experience.
Key Features:
- Display: 12.3-inch LED Digital Screen
- Resolution: 1920x720
- Operating System: Linux
- Connectivity: WIFI, Bluetooth
- Customization: 30 ambient lighting colors, multiple dashboard display styles (Classic, Sport, Sport Rainbow, Sport Race, Digital, Economic & Range)
- Material: ABS
- Placement: Dashboard
- Compatibility: VW Golf 7 MK7 (Years 2013-2020)

Figure 1: Prelingcar 12.3-inch LCD Digital Dashboard Cluster. Features a 1920x720 screen and supports WIFI/Bluetooth/Remote Upgrade.

Figure 2: Upgraded dashboard with HD resolution screen, supporting wireless casting for navigation and music.

Figure 3: Dashboard showing 30 available ambient lighting colors. These synchronize with existing ambient lighting for an immersive experience.
2. Setup and Installation
2.1 Pre-installation Checklist
- Ensure your vehicle is turned off and the battery is disconnected before starting installation.
- Important: For Volkswagen vehicles, you must turn off the speed limit alarm and winter tire settings in your original car system before dismantling or replacing the car's dashboard.
2.2 Installation Video Guides
Refer to the following video guides for detailed installation instructions specific to your vehicle model:
- For VW Golf 7: https://youtu.be/WLpN78sgNgY
- For VW Golf 6: https://youtu.be/K9JSKCPHikc
- For 2017 VW Passat: https://youtu.be/D8tlx6h0Svw
- For VW Tiguan/Sciricco: https://youtu.be/ySrg55XC30E
- For VW Passat B8 Jetta: https://youtu.be/bylYaPyUa24
- For Audi TT: https://youtu.be/DDE39FJGePY
2.3 Motherboard Transfer
Regardless of your VW model, you must remove the original motherboard from your existing cluster and install it into the new digital cluster.

Figure 4: Illustration of removing the original car motherboard and installing it into the new digital cluster.
2.4 Specific Installation for 4 Out Circle Red Instrument Cluster
For VW Golf 5, EOS, Caddy, or Touran devices equipped with a 4 Out Circle Red instrument cluster, follow this specific connection method:

Figure 5: Connection diagram for 4 Out Circle Red Instrument Cluster. Relate Big Black Connection and Relate Small Blue connection as shown.
Refer to the video guide for this specific installation: https://youtube.com/shorts/z3hYiXCL3Zk?si=kb0Kf9ukyhruhPNS
3. Operating Instructions
3.1 Dashboard Display Modes
The digital dashboard offers various display styles that can be selected via your steering wheel controls:
- Classic
- Sport
- Sport Rainbow
- Sport Race
- Digital
- Gear & Speed
- Economic & Range
3.2 Ambient Lighting Settings
The cluster supports 30 ambient lighting colors. These colors synchronize with your vehicle's existing ambient lighting system for a cohesive look.
3.3 Setting Fuel Tank and Car Type
To configure your fuel tank capacity and car type, navigate to the settings menu:
- Go to the main interface settings.
- Select 'Car Type' or 'Configure Calibration'.
- Set the details according to your car model and fuel tank capacity.

Figure 6: Menu for setting fuel tank and car type.

Figure 7: Car type selection menu, showing options like Scirocco.

Figure 8: Fuel tank calibration menu.
3.4 Digital Function Settings
Access these settings via the main interface settings, then 'Advanced settings'. The password for advanced settings is '123456'.
- Kilometer Setting:
- Enter password '123456' and click 'OK'.
- In the total mileage column, enter the mileage value displayed on your original instrument panel.
- Press the confirm button. - Model Settings:
- Enter password '123456' and click 'OK'.
- Select the corresponding model in the model selection bar. - VW Fuel Tank Capacity Setting:
- Enter password '123456' and click 'OK'.
- Enter 93L in the main fuel tank capacity column.
- Enter 45L in the secondary fuel tank capacity column.
- Click the confirm button.

Figure 9: Dashboard view during digital function settings.
3.5 Steering Wheel Control (Wiper Buttons)
If your vehicle does not have steering wheel buttons for control, you can use the wiper buttons to navigate the digital cluster. Refer to this video guide:
https://youtube.com/shorts/2zBW2YMkDOW
3.6 Phone Mirroring and Navigation
- Wireless/Wire Connection (iPhone/Android):
- To connect your iPhone or Android phone for display on the digital cluster, refer to: https://youtu.be/n73xdKejsDQ - HDMI Cable Connection:
- To connect via HDMI cable for Volkswagen digital cluster with a radio Android player: https://youtu.be/yb73_PnrOms
- For iPhone/Huawei Android phone to connect via HDMI for CarPlay/Android Auto synchronization: https://youtube.com/shorts/4mmm1TM8gMA
4. Maintenance
4.1 Clearing Maintenance Information
To clear maintenance information, navigate to 'Subtotal Mileage' and select 'Clear'.
4.2 Oil Change Reminder
The digital cluster can display oil change maintenance reminders, indicating the remaining distance until the next service is due.

Figure 10: Dashboard displaying an oil change maintenance reminder.
5. Troubleshooting
5.1 Mirror Screen Related Questions
- Screen casting sometimes does not cast or cannot find RK:
- Ensure the previous connection is completely disconnected. Turn off the engine and lock the car for 5 minutes, then restart your phone. - Phone casting audio in dash, no sound from car navigation:
- This depends on your mobile phone. Samsung and Huawei phones can wirelessly cast video via WiFi and send audio via Bluetooth to the center navigation. Apple iOS systems are more restricted. - Phone cast and navigation interface not found:
- If the navigation interface shows a compass, press the multifunction steering wheel down button to bring it up. - Screen casting appears as a small piece in the middle:
- On your phone, pull down the notification bar (like turning on WiFi), close the vertical screen lock, enter the navigation map or video software, then shake your phone to enable horizontal screen display. In the digital UI mode, you can then display full-screen navigation or video.
- Setting method: Press the left button on the right side of the square control to find the interface menu, press the down button to choose 'digital' mode, then press OK. - Phone resting on screen, dash casting follows black screen:
- This is a phone-specific behavior. Some phones allow screen casting. You may need to adjust your phone's screen-off time to be longer or permanent.
5.2 Dashboard Related Questions
- Bluetooth and WiFi:
- These functions are for remote upgrades of the catch protocol only. Do not make settings. - Vehicle Selection:
- Press the left button on the right side of the multifunction reassurance disc.
- Find 'Settings' menu, then 'Model Selection'.
- Press OK to enter, then select your vehicle model and press OK.
- Turn off the engine and lock the car for two minutes after power on for changes to take effect. - Time Setting:
- The system relates to 'time settings' within the main settings menu. - PQ Turn Signals Not Showing:
- Go to settings -> physical lights -> off. Lock the car with the engine off for a few minutes. - PQ Tanks Not Allowed:
- In Settings -> Configuration Calibration -> Manual, adjust downward until the tank is full. - No Speed Allowed:
- In Settings -> Configuration Calibration, adjust 'Faster car speed' to -3 (slower) or +3 (faster). - Car Dings at Some Fixed Speed Above 30:
- Set the speed limit alarm in the original mechanical instrumentation to 250 before switching it off.
6. Specifications
| Feature | Specification |
|---|---|
| Display Size | 12.3 inches |
| Resolution | 1920x720 |
| Operating System | Linux |
| Material | ABS |
| Placement | Dashboard |
| Item Weight | 3.5 kg |
| Item Length | 40 cm |
| Item Width | 30 cm |
| Item Height | 20 cm |
| Special Features | LED digital, WIFI/Bluetooth/Remote Upgrade, Wireless casting, 30 ambient lighting colors |
| Compatibility | VW Golf 7 MK7 (2013-2020) |
7. User Tips
- Installation is generally straightforward and can be completed in about 45 minutes by an experienced individual.
- If you encounter any difficulties during installation or setup, the seller's support team is highly responsive and helpful.
- Always ensure to turn off the speed limit alarm and winter tire settings in your original car system before proceeding with the dashboard installation.
- For manual transmission vehicles, this unit is designed to display the current gear selection, similar to the stock analog display.
8. Warranty and Support
For any technical issues, installation assistance, or support, please contact our engineering team. We offer professional engineering help for installation and troubleshooting.
Contact Information:
- Sale Contact Phone: +86 13360093498
- Email Address: candicesong1985@163.com
- Engineer Skype ID: live:.cid.fd83a6a056155b8f
- Engineer WhatsApp: +905010825798
When contacting support, please provide details of your issue and your vehicle model for faster assistance.