Fccemc Car LED Ambient Light

Contents

Fccemc Car LED Ambient Light

User Manual

Introduction

The Fccemc Car LED Ambient Light system is designed to enhance your vehicle's interior with dynamic and customizable lighting. Featuring 64 colors, RGB capabilities, and control via a mobile app, remote, or USB button, this system offers a personalized atmosphere. Its non-destructive installation ensures easy setup without permanent modifications to your car.

Car interior with multi-color LED ambient light strips installed along the dashboard, showing a smartphone app and remote control.
Overview of the Car LED Ambient Light system with app and remote control.
Before and after comparison of a car interior, showing a dull interior before and a vibrant, colorful interior after LED ambient light installation.
Transform your car's interior from monotonous to vibrant with ambient lighting.

Setup

Package Contents

  • 1x LED Ambient Light Strip (110cm)
  • 1x Integrated USB Controller
  • 1x Remote Control

Installation Guide

  1. Plan Placement: Identify desired locations for the light strip within your car's interior (e.g., dashboard gaps, door panels). The strip is designed for non-destructive installation, fitting into existing seams.
  2. Measure and Cut (if necessary): The light strip can be trimmed to your desired length. Use scissors to cut the strip. Important: Be careful not to cut through the lamp beads. The cut-off section will not be usable.
  3. Insert the Strip: Gently push the flexible silicone strip into the gaps or seams of your car's interior. While the strip is soft and flexible, it can be somewhat rigid for very sharp curves, requiring careful manipulation.
  4. Connect Power: Plug the integrated USB controller into any available USB port in your vehicle. This is a plug-and-play connection.
  5. App Installation: Locate the QR code on the USB controller. Scan this QR code with your smartphone to download the dedicated control application. Users have reported success with apps like 'Zengge'.
Diagram showing key features: soft and flexible material, ability to be cropped with scissors (caution not to cut lamp beads), and a USB interface with a control button and QR code.
Key features for installation: flexibility, trimmability, and USB power with app QR code.

Operating Instructions

Power On/Off and Mode Switching

  • USB Controller Button: A short press on the button located on the USB controller will turn the lights on or switch between different lighting modes. A long press will turn the lights off.

Control Methods

Your ambient light system can be controlled using three methods:

  1. Mobile App Control:
    • Ensure Bluetooth is enabled on your smartphone.
    • Open the installed control application.
    • The app allows you to select from 64 colors, adjust brightness, choose various RGB lighting patterns, and activate music synchronization modes where lights react to audio.
    • You can also create custom lighting patterns and effects.
    Car interior with LED ambient lights on the dashboard, showing a smartphone displaying the control app with music visualization.
    Control your ambient lights and sync with music using the mobile app.

    Demonstration of mobile app control for color changes and lighting effects.

  2. Remote Control:
    • Use the provided remote control for quick access to basic functions such as changing colors, adjusting brightness, and switching between preset modes.
  3. USB Controller Button:
    • As mentioned above, the button on the USB controller provides basic on/off and mode cycling functionality.
Nine coiled LED light strips displaying various solid colors and color gradients.
Examples of various colors and lighting effects available.
Four close-up images of an installed LED light strip in a car, showing different multi-color patterns and transitions.
Dynamic color patterns and transitions in an installed light strip.

Maintenance

  • Cleaning: To clean the light strip, gently wipe it with a soft, dry, or slightly damp cloth.
  • Avoid Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the acrylic material and LED components.
  • Handle with Care: Avoid excessive bending or pulling of the light strip, especially near connections, to prevent damage.

Troubleshooting

  • Lights Not Turning On:
    • Ensure the USB controller is securely plugged into a working USB port.
    • Check if the vehicle's USB port is receiving power (e.g., when the ignition is on).
    • Try a different USB port or power source.
  • Mobile App Not Connecting:
    • Verify that Bluetooth is enabled on your smartphone.
    • Ensure the app is correctly installed and has necessary permissions.
    • Try restarting the app, your smartphone, or unplugging and replugging the USB controller.
  • Remote Control Not Working:
    • Check the battery in the remote control and replace it if necessary.
    • Ensure there are no obstructions between the remote and the USB controller.
  • Inconsistent Lighting or Flickering:
    • Inspect the light strip for any visible damage or kinks.
    • Ensure the USB connection is stable.

Specifications

FeatureSpecification
Voltage5V
MaterialAcrylic
Special FeaturesSound control (music sync)
Light Strip Length110 cm (43.307 inches)
Number of Colors64 (Full RGB)
Control MethodsMobile App, Remote Control, USB Controller Button
Package Length20 cm
Package Width17 cm
Package Height2 cm
Package Weight0.12 kg
Image showing the 110cm LED light strip with its USB controller, a remote control, and a smartphone displaying the control app.
Complete set of the Car LED Ambient Light system.

User Tips

  • Installation for Curves: For optimal placement, plan your route carefully, especially around curves, as the strip can be somewhat rigid. Patience helps achieve a clean look.
  • Precise Cutting: If cutting the strip, measure precisely and avoid cutting through lamp beads; the cut-off piece will not be functional.
  • Memory Function: The device remembers your last settings (color and mode) even after being unplugged and reconnected, so you don't have to reset it every time.
  • App Connectivity: Ensure your phone's Bluetooth is active and the correct app (e.g., 'Zengge') is installed and updated for full control and access to all features like music sync.

Warranty and Support

For any issues, technical support, or warranty inquiries, please contact the seller directly through your purchase platform. For additional details or specific instructions, you may refer to the full User Manual PDF available here.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.