1. Product Introduction
The BT-S3NS is a Bluetooth 5.0 motorcycle helmet intercom system designed for clear communication and entertainment while riding. It supports rider-to-rider intercom, mobile phone connectivity, MP3/GPS audio, and is water-resistant. This manual provides detailed instructions for installation, operation, and maintenance.
Main Unit Components
The main unit features a power on button, an indicator light, a phone button, plus (+) and minus (-) buttons for volume and track control, a headphone socket, and an audio cord socket. It connects to a speaker and microphone system, which includes an earphone plug and a round adhesive plate for mounting.
2. Specifications
| Feature | Specification |
|---|---|
| Bluetooth version | 5.0 |
| Operating distance | 1000 meters |
| Standby duration | 200 hours |
| Working duration | 16 hours |
| Charging duration | About 3 hours |
| Charging interface | TYPE-C interface |
| Power supply requirements | 5V=1A |
| Battery type | Chargeable lithium polymer battery |
| Operating temperature | 14°F ~ 122°F (-10°C ~ 50°C) |
| Storage environment | 5°F ~ 131°F (-15°C ~ 55°C) |
Note: Working duration and mobile phone types are related to the operating status, so the actual duration may be somewhat different. There may be deviation in the operating distance due to effects such as environments and climates, etc.
3. Packing List
The package includes the following items:

- Main unit
- Headphone cord
- Charging cord (USB Type-C)
- Operation instructions (this manual)
- Clamp for helmet mounting
- Magic tape clamp (Velcro clip)
- Screwdriver
- Audio cord
The new model features a Type-C USB charging port, replacing the old Mini USB model for improved convenience and compatibility.

4. Installation Steps
4.1 Fixing Installation by Clamps
- Step 1: Loose screws at the back of the clamps with the component.

Loosen the screws on the clamp. - Step 2: Open the inner lining on the left of the helmet to mount the clamp.

Open the helmet's inner lining. - Step 3: Align the clamping position of the main unit base at the clamp fastener, and move the main unit at a proper position and in the direction of Arrow 1 first, followed by the direction of Arrow 2 to tighten it.

Align and secure the main unit to the clamp. - Step 4: Open inner lining at ear position of helmet and attach speaker hook surface to fur surface.

Attach the speaker to the helmet's inner lining. - Step 5: Attach circular microphone rod to a suitable position on the left side of the helmet, so that the microphone is aimed at the mouth.

Position the microphone correctly. - Step 6: Adjust the line and inner linings for comfort and proper fit.

Adjust cables and helmet lining. - Step 7: Insert the plug into the headphone jack. Installation is completed.

Insert the headphone plug.
4.2 Installation by Velcro Clip
- Step 1: Align the base of the main unit with the mounting port of the clip.

Align the main unit with the velcro clip. - Step 2: Peel off the sticker on the back of the velcro clip and stick it in place on the left side of the helmet. Move the main unit in the direction of arrow 1, then move in the direction of arrow 2 to fasten.

Attach the velcro clip to the helmet.
4.3 Main Unit Disassembly Steps
- Remove the headphone plug.
- Move the main unit near arrow 1 mark, then move arrow 2 in the direction of arrow 2 mark, and move the whole main unit in the direction of arrow 3 mark, and then take it out finally.
5. Operating Instructions
5.1 Function Introduction
The BT-S3NS supports various functions including two-vehicle communication (up to 1000M), three-way intercom with the ability to switch between two-to-two intercom, and connection with other Bluetooth headsets. It also features stereo music playback, voice calls, built-in FM radio, Hi-Fi stereo audio, DSP processing for enhanced sound, play control, and is waterproof.
5.2 Button Operation Instructions
Power Button
- Power On: In the power off state, press for 2 seconds until you hear 'Power On'. The blue light will flash 3 times, then become regular flashing. The current battery power will be broadcast.
- Power Off: In the power-on state, press for 5 seconds until you hear 'Power Off'. The blue light will be on for 1 second.
- Pairing Mode: In the off state, press for 4 seconds until red and blue lights flash alternately.
- Start Intercom Pairing: Both Bluetooth units enter pairing mode. Press the power button of one unit. Both units will turn blue and flash simultaneously after 'OK', and you will hear 'Intercom connected'. Press it again to interrupt, and press again to reconnect.
- Terminate Bluetooth Intercom Call: Short press during intercom. You will hear 'Intercom disconnected'.
- Clear Pairing Record: When shutting down, press the power button for 8 seconds until you hear a 'beep'. It will automatically shut down after clearing. Re-pairing is required for next use.
Phone Button
- Answer Call: When connected to a mobile phone and an incoming call is received, short press to answer or it will automatically answer after 8 seconds.
- Reject Call: When connected to a phone, press for 2 seconds to reject a call.
- Sound Switch Between Bluetooth Headset and Mobile Phone During Call: Press for 2 seconds during a call to switch audio between the headset and mobile phone.
- Hang up Call: Press during a call to hang up.
- Music Play/Pause: When connected to a phone, press the button.
- Voice Call (Voice Assistant): When there is no call, press for 2 seconds to activate voice assistant and hear 'Voice dial'.
- Start FM: When there is no call and no music playing, double-click the button to hear 'Turn on radio'.
Plus Button (+)
- Volume Up: Long press to increase volume. A 'beep' tone will be heard at maximum volume.
- Previous Music: When playing music, press to switch to the previous track.
- FM Tuning: In FM mode, press to search for the next station.
Minus Button (-)
- Volume Down: Long press to decrease volume.
- Next Music: When playing music, press to switch to the next track.
- FM Tuning: In FM mode, press to search for the previous station.
5.3 Bluetooth Status Indication & Prompt
- Power On Status: When powered on, you will hear 'Power On'.
- Intercom Connected: When intercom is connected, you will hear 'Intercom connected'.
- Intercom Disconnected: When intercom hangs up, you will hear 'Intercom disconnected', and the blue light flashes every 2 seconds.
- Charging Status: The red light is always on when charging. The red light turns off when fully charged.
- Low Battery Alarm: The current battery level will be broadcast when the unit is turned on ('Battery full', 'Battery medium', 'Battery low'). When the battery is low during operation, it will prompt 'Battery low' every 20 seconds, and the red light will turn on.
6. Pairing Method
6.1 Two Ways for BT-S3NS to Enter the Pairing Mode
- Method 1: When Bluetooth is off, press the power button for 4 seconds. Red and blue lights will flash alternately.
- Method 2: When Bluetooth is turned on, press the power button and phone button simultaneously for 2 seconds. Red and blue lights will flash alternately.
Note: If a previously paired Bluetooth device fails to enter pairing mode using Method 1, it's due to the unit's memory function. To pair a new device, clear previous pairing records first.
6.2 Two BT-S3NS Bluetooth Pairing
To pair two BT-S3NS units for intercom communication:
- Step 1: Place two BT-S3NS units within 1 meter range. Operate both units according to Section 6.1 Method 1, so that both units enter pairing mode (red and blue lights flashing alternately).
- Step 2: Press the power button of one of the units. It will automatically search for the other unit for pairing. After successful pairing, you will hear 'Intercom connected', and you can start intercom.
6.3 BT-S3NS Bluetooth and Mobile Phone/GPS/MP3 Pairing
To pair your BT-S3NS with a mobile phone, GPS, or MP3 player:
- Step 1: Place the BT-S3NS unit and your mobile phone/GPS/MP3 device within 1 meter range.
- Step 2: Follow Section 6.1 Method 1 to put the BT-S3NS into pairing mode (red and blue lights flashing alternately). Turn on Bluetooth on your mobile phone/GPS/MP3 device to search for Bluetooth devices. Select 'BT-S3NS' from the list, click connect. You will hear 'Bluetooth connected' when the connection is successful.
Note for simultaneous pairing (two intercoms + mobile phone): First, follow the steps in Section 6.2 to pair the two intercoms. After intercom connection is successful, press one of the on/off buttons to hang up the intercom. The Bluetooth unit will then enter pairing mode. Now, turn on your mobile phone's Bluetooth to search for 'BT-S3NS' and connect.
6.4 Pairing BT-S3NS Version with BT-S3 Version
To pair a BT-S3NS unit with an older BT-S3 unit:
- Step 1: Turn on both devices first to clear any existing pairing records. Place both Bluetooth devices within 1-meter range.
- Step 2: Long press the power button of the BT-S3NS Bluetooth unit until red and blue lights flash alternately.
- Step 3: Press the power button on the BT-S3 version for 4 seconds to enter the red and blue light flashing mode.
- Step 4: Short press the power button and phone button of the BT-S3NS Bluetooth unit simultaneously. It will automatically search for the BT-S3 Bluetooth unit for pairing. When you hear 'Intercom connected', the connection is successful.
Note: The BT-S3NS version Bluetooth can initiate pairing, but the BT-S3 version cannot actively connect to the BT-S3NS version Bluetooth.
6.5 Pairing BT-S3NS with Other Bluetooth Headsets
To pair a BT-S3NS unit with other brands of Bluetooth headsets:
- Step 1: Turn on the BT-S3NS device first to clear the pairing record. Place both Bluetooth devices within 1-meter range.
- Step 2: Long press the power button of the BT-S3NS Bluetooth unit until red and blue lights flash alternately.
- Step 3: Turn on the other Bluetooth headset and ensure it enters its red and blue light flashing pairing mode.
- Step 4: Short press the power button and phone button of the BT-S3NS Bluetooth unit simultaneously. It will automatically search for the other Bluetooth headset for pairing. When you hear 'Intercom connected', the connection is successful.
6.6 BT-S3NS Three-way Intercom Pairing Instructions
For three-way intercom, clear the pairing record of each machine before pairing.
- Step 1: Clear Pairing Records: Turn on units A, B, and C. Press the power button for 8 seconds on each unit respectively until you hear a 'beep' tone, and red & blue lights flash simultaneously.
- Step 2: Pair A and B: Simultaneously make red and blue lights flash on A and B (using Method 1 from 6.1). Press the power button of A, and wait for A & B to turn into a blue light simultaneously or hear 'Intercom connected'.
- Step 3: Pair B and C: Press the power button of B to hang up the intercom between A & B. Press the power button of B and the phone button simultaneously for 2 seconds to enter red & blue lights flashing. Then, press the power button of C to enter red & blue lights flashing. Finally, press the power button of B to initiate pairing. Wait for B & C to turn into blue lights simultaneously or hear 'Intercom connected'.
- Step 4: Pair C and A: Press the power button of C to hang up the intercom between B & C. Then press the power button and phone button of C simultaneously for 2 seconds to enter red & blue lights flashing. Press the power button and phone button of A simultaneously for 2 seconds to enter red & blue lights flashing. Finally, press the power button of C to initiate pairing. Wait for C & A to turn into blue light simultaneously or hear 'Intercom Connected'.
- Step 5: Three-way Call Mode: At this moment, the three-way call mode of A & B & C has been set.
- A: Press the power button to hang up intercom. When not in intercom, press the power button to reconnect to intercom with B, and press the power button twice to reconnect to intercom with C.
- B: Press the power button once to C, and press the power button twice in a row to A.
- C: Press the power button once to A, and press the power button twice in a row to B.
7. Function Priority Description
The BT-S3NS prioritizes functions as follows:
- Level 1: Telephone (Highest Priority)
- Level 2: Bluetooth intercom
- Level 3: Mobile Music
- Level 4: FM Radio
- Level 5: External audio input (audio cable can be used to listen to songs, and it can also be used when the unit is turned off)
8. Maintenance
- If you stop using this unit for a long period, please store it in a dry place.
- Charge the unit regularly (charge once every three months) to ensure it remains functional.
- The storage temperature of the unit is -15°C to 55°C. Do not store it in environments with excessively high or low temperatures, as this may adversely affect its service life.
- Do not expose this unit to open flames to avoid explosion.
9. Troubleshooting
- Device not turning on/connecting: Ensure the device is fully charged. If it still doesn't turn on, try clearing the pairing record (press power button for 8 seconds when off) and re-pairing.
- Poor FM signal reception/low volume: FM signal quality can vary based on location and environment. Try moving to an open area. Ensure volume is turned up using the '+' button.
- Music audio quality issues (squeaks, unclear high notes): Check the connection of the headphone cord. Ensure the speakers are properly positioned in the helmet.
- Intercom communication flaws/disconnections: Ensure units are within the 1000m operating distance and there are no major obstructions. Re-pair the intercom units if issues persist.
- Volume difference between music and communication: The device has function priority. Adjust volume levels for each function as needed. If music is loud but communication is weak, check microphone placement and ensure it's aimed at your mouth.
- Device turns off by itself: This could indicate a low battery. Ensure the device is fully charged before use. If the issue persists after charging, contact support.
- Compatibility with other brands (e.g., Cardo, Ejeas): The BT-S3NS supports pairing with other Bluetooth headsets. Follow the instructions in Section 6.5. However, full feature compatibility (like universal intercom) may vary between brands.
- Pairing with older BT-S3 Pro models: Yes, the BT-S3NS can be paired with BT-S3 versions. Refer to Section 6.4 for specific instructions.
10. User Tips
- For optimal sound quality, ensure speakers are positioned directly over your ears and the microphone is close to your mouth.
- Regularly check for firmware updates (if available from the manufacturer) to improve performance and fix potential bugs.
- When installing, take your time to properly route all cables within the helmet lining to avoid discomfort and ensure durability.
- If experiencing pairing issues, always try clearing previous pairing records on all devices involved before attempting to pair again.
- The device is waterproof, but avoid submerging it or exposing it to extreme water pressure to prolong its lifespan.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official product documentation or contact the seller directly. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download: View User Manual (PDF)