Introduction
The POLVCDG X10 Bone Conduction Headphones are designed for active lifestyles, offering a unique listening experience through bone conduction technology. With IPX8 waterproofing and built-in MP3 memory, these headphones are ideal for swimming, sports, and everyday use, allowing you to enjoy music without blocking your ears.
Package Contents
Please check the package for the following items:
- POLVCDG X10 Bone Conduction Headphones
- User Manual
- Charger (charging cable)
- Lightning Adapter (if applicable)
Wearing Instructions
To ensure optimal sound quality and comfort, follow these instructions for wearing your headphones:
- Hang the headphones behind your neck.
- Position the speakers on both sides against your cheekbone.
- Adjust for a comfortable fit.
Key Function Overview
Familiarize yourself with the main components and controls of your X10 headphones:
- Magnetic charging port
- Microphone hole
- Right button
- Left button
- Display screen
Setup & Pairing
Bluetooth Pairing
- Power On: In the off state, long press the Right button for 3 seconds until you hear the "power on" tone.
- Enter Pairing Mode: After powering on, the headset automatically enters search pairing mode. The LED display will show Bluetooth flashing.
- Connect: On your mobile phone, desktop computer, or laptop, search for "X10 (Bluetooth)" in the Bluetooth settings and manually click to connect.
- Matching Success: For the first connection, you need to manually click Connect. The headset will beep "Bluetooth has been connected" upon successful pairing.
- Disconnect Bluetooth: To disconnect, actively disconnect Bluetooth from your phone. The Bluetooth light will flash.
TF Card Function
The headset's TF card function supports MP3/WAV format music only.
- Switch Mode: In any state, double-click the Right button to switch between Bluetooth mode and TF card mode. You will hear a beep indicating a successful switch.
- From Bluetooth to TF Card: While in Bluetooth playback, double-click the Right button to switch to TF card playback. The display will show the Bluetooth light / TF card mode beep.
- From TF Card to Bluetooth: While in TF card playback, double-click the Right multi-function key to switch to Bluetooth playback, accompanied by a Bluetooth mode beep.
Operating Instructions
Power On/Off
- Power On: In the off state, long press the Right button for 3 seconds. Tone: "power on".
- Shutdown: In the on state, long press the Right button for 5 seconds. Tone: "Chinese is Bluetooth off" (or similar shutdown tone).
Music Playback
- Play/Pause: In Bluetooth connection status, click the Right button to play. When music is playing, click the Right button to pause.
- Next Song: In music state, triple-click the Right button to play the next song.
- Previous Song: In music state, triple-click the Left button to play the previous song.
Call Management
- Answer Call: In case of an incoming call, click the Right button.
- Reject Call: In case of an incoming call, press and hold the Right button for 2 seconds.
- Hang Up: During a call, click the Right button to hang up.
Volume Control
- Volume Increase: In music and call status, double-click the Left button to increase the volume by one level.
- Volume Decrease: In music and call status, click the Left button to reduce the volume by one level.
Voice Assistant
- Activate/Deactivate: After connecting via Bluetooth (and not during a call), long press the Left button for 2 seconds to enter voice mode. Long press again for 2 seconds to exit.
- Note: For Siri (iOS) and Android voice assistants, you may need to enable the "Bluetooth headset press key to start" option in your device's voice assistant settings, or close background apps for Siri to function correctly.
Charging & Battery
The X10 headphones feature a built-in non-removable rechargeable battery. Please do not attempt to remove the battery to avoid damaging the headset.
Charging Instructions
- Connect the charging cable to the magnetic charging port on the headphones.
- Plug the charger into an AC power outlet.
- When charging, the headset will be off and cannot be turned on. The display percentage's end digit will flash, indicating the charging process.
- The display percentage represents the current charge level.
- When the headset's battery level is 10% or less, you will hear a low battery tone. Charge the headset promptly to avoid automatic shutdown.
Charger Specifications
It is recommended to use a charger with the following specifications:
- Output Voltage: DC5V +/- 0.25V
- Output Current: 100mA - 500mA
Warning: Using a charger with specifications outside the recommended range may damage the Bluetooth headset, violate warranty terms, and pose safety risks. Only use approved chargers. If the product came with a charging cable, connect it to a 3C certified charger or computer for charging. Avoid severe impacts to the product, as this may damage the electronic motherboard and battery.
Battery Maintenance
For long-term non-use, store the headset in a dry and ventilated place and charge it every two months to maintain battery health.
Specifications
| Feature | Specification |
|---|---|
| Model | X10 |
| Material | Metal, PVC, ABS, Plastic, TPU, Silica Gel |
| Weight | 182g |
| Dimensions (Width x Depth x Height) | 12mm x 16mm x 5mm |
| Battery Capacity | 230mAh |
| Battery Life (Music Playback) | Up to 10 hours (standard state: 8 hours) |
| Standby Time | 10 days |
| Charging Time | 2.5 hours |
| Bluetooth Version | 5.3 |
| Maximum Wireless Range | <10m |
| Waterproof Rating | IPX8 (Swimming depth up to 30 meters) |
| TF Card Capacity | 32GB |
| Speaker Impedance | 8Ω + 3db |
| Microphone Sensitivity | -42 ± 2db |
| Vocalism Principle | Bone Conduction |
| Features | Waterproof, With microphone, Amazon Alexa Support, Apple Siri Support, Detachable Cable, Playback Control, Google Assistant Support, NFC Technology, Voice assistant built-in |
| Certification | CE, FCC, RoHS |
Important Notes & Safety Information
- The correct position for the speaker is on the cheekbone in front of the ear. Do not place the speaker inside the ear.
- Listening to loud music for extended periods may cause discomfort. Use a medium volume whenever possible and avoid high volumes for long durations.
- Using headphones can affect your perception of surroundings, regardless of volume. Always pay attention to your environment.
- Do not throw, sit on, or immerse the headset in salt water. Keep the headset away from fire and high voltage equipment.
- Not suitable for children under three years old due to small parts.
- Do not dispose of the product as household waste. Take it to an appropriate local electrical and electronic equipment recycling station.
- The company does not assume responsibility for personal property damage caused by violating these warnings.
User Tips
- Music Playback: For random music playback from the internal memory, check the device's settings or the music player interface for shuffle or random play options.
- Durability: While the headphones are designed for sports and are waterproof, avoid dropping them or subjecting them to severe impacts to prevent damage.
- Comfort: If you experience discomfort during long periods of wear, try adjusting the position of the speakers on your cheekbones.
Troubleshooting
- Cannot connect to Bluetooth:
- Ensure the headphones are powered on and in pairing mode (Bluetooth light flashing). Make sure Bluetooth is enabled on your device and search for "X10 (Bluetooth)". If it's the first time connecting, you may need to manually select it.
- No sound or low volume:
- Check the volume level on both the headphones and your connected device. Ensure the speakers are correctly positioned on your cheekbones, not in your ears.
- Headphones not charging:
- Verify that the charging cable is securely connected to both the headphones and the power source. Ensure the charger meets the recommended specifications (DC5V +/- 0.25V, 100mA-500mA output). The display's last digit should flash when charging.
- TF card music not playing:
- Confirm that the music files on the TF card are in MP3 or WAV format. Ensure you have switched to TF card mode by double-clicking the Right button.
- Voice assistant not responding:
- Ensure the headphones are connected via Bluetooth and you are not on a call. Long press the Left button for 2 seconds to activate. For some devices (iOS/Android), you might need to enable the "Bluetooth headset press key to start" option in your phone's voice assistant settings or close background apps.
Warranty & Support
For detailed warranty information and further support, please refer to the official product documentation or contact customer service. A comprehensive user manual is also available in PDF format:
Product Demonstration Video
Watch this video for a visual guide on how to use and enjoy your POLVCDG X10 headphones: