1. Product Overview
The DIBILUN Track Light LED Ceiling Lamp is a versatile lighting solution designed for various indoor applications, including living rooms, cloakrooms, staircases, and commercial spaces like clothing shops. It features adjustable lighting angles, multiple color temperature options, and an efficient LED light source for optimal illumination and eye comfort.
Key Features:
- Adjustable irradiation angle (up to 270° for strip lights, 360° for spotlights)
- No flicker hazard for eye protection
- High color rendering index (Ra>97) for natural color restoration
- Available in multiple wattages (10W, 20W, 30W)
- Supports a wide voltage range (85-265V AC)
- Durable aluminum and PC construction
2. Package Contents
Depending on your purchased set, the package may include:
- LED Track Lights (spotlights or strip lights)
- Track Rails
- Connectors (straight, L-shaped, etc.)
- Mounting Screws and Anchors
- User Manual (this document)
3. Setup and Installation
Safety Precautions:
- Ensure power is turned off at the circuit breaker before installation.
- If you are unsure about electrical wiring, consult a qualified electrician.
- Do not exceed the specified voltage range (85-265V AC).
Installation Method: Self-contained
Installation Steps:
- Fix the Track to the Ceiling: Securely mount the track rails to your desired ceiling location using appropriate screws and anchors. Ensure the track is level and firmly attached.
- Connect to Wires: Open the wiring cover on the track end connector. Connect the live (usually brown or red) and neutral (usually blue or black) wires from your ceiling power supply to the corresponding terminals within the track connector. Ensure all connections are secure and insulated.
- Install the Lamp into the Track: Align the lamp's base with the track groove. Insert the lamp into the track and push it upwards until it clicks into place.
- Tighten the Buckle: Rotate or slide the lamp's locking mechanism (buckle) to secure it firmly within the track.
- Power On: Once all lamps are installed and secured, restore power at the circuit breaker. Test the lights.

Figure 3.1: Detailed Installation Steps (Product CMJ-GDD-001)

Figure 3.2: Examples of Multiple Installation Methods
4. Operating Instructions
Turning On/Off:
- The track lights are controlled by a standard wall switch (Touch On/Off Switch).
- Flip the switch to turn the lights on or off.
Adjusting Light Direction:
- Spotlights: Can be rotated 360° horizontally and adjusted 90° vertically to direct light precisely where needed.
- Strip Lights: Can be rotated and adjusted up to 270° (for some models) or 180° to change the direction of illumination.

Figure 4.1: 360° No Dead Angle Lighting for Spotlights

Figure 4.2: Adjustable Irradiation Angle (270° for Strip Lights)

Figure 4.3: Strip Light Rotation and Adjustment (180°)
Changing Color Temperature (if applicable):
- Some models may offer multiple color temperatures (White Light, Warm Light, Neutral Light). This is typically selected during purchase or may be controlled by a specific switch if the model supports it.

Figure 4.4: Available Color Temperatures
5. Maintenance
To ensure the longevity and optimal performance of your track lights, follow these simple maintenance guidelines:
- Cleaning: Turn off the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the lamp body and lampshade. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically check the track and lamp connections to ensure they are secure.
- Bulb Replacement: As these units use integrated LED bulbs, individual bulb replacement is generally not required. If a light fails, the entire lamp unit may need to be replaced.
6. Troubleshooting
If you encounter issues with your track lights, try the following solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty lamp unit | Check circuit breaker and wall switch. Ensure wires are securely connected (power off first). If other lamps on the same track work, the lamp unit may be faulty. |
| Light flickers | Loose connection Unstable power supply | Ensure lamp is securely seated in the track. Check main power supply for stability. |
| Light is dim | Dust accumulation Voltage fluctuation | Clean the lampshade and lamp body. Ensure voltage is within the specified range. |

Figure 6.1: No Flicker Hazard Feature
7. Specifications
| Feature | Specification |
|---|---|
| Brand | DIBILUN |
| Model Number | Track Light |
| Item Type | Track Lighting |
| Wattage | 10W, 20W, 30W (per lamp) |
| Voltage | 85-265V AC |
| Power Source | AC |
| Light Source | LED bulbs (integrated) |
| Bulbs Included | Yes |
| Dimmable | No |
| Finish | Polished Steel |
| Style | Modern Style |
| Usage | General Indoor Lighting (Residential & Commercial) |
| Material | Aluminum + PC |
| Color | Black / White |
| Light Color | Cold White / Neutral White (selectable) |
| Certifications | RoHS, CE, CCC |
Dimensions:
- Spotlight (30W): Diameter: 6cm, Length: 16cm, Height (from track): 14.5cm
- Strip Light (Length x Width x Height):
- 10W: 214mm x 35mm x 55mm
- 20W: 346mm x 35mm x 55mm
- 40W: 611mm x 35mm x 55mm

Figure 7.1: Spotlight Dimensions

Figure 7.2: Strip Light Dimensions and Key Specifications
8. User Tips
- Mounting Flexibility: While primarily designed for ceiling installation, track lights can often be mounted on walls if the track system allows and is securely fastened. Always ensure the mounting surface can support the weight.
- Voltage Compatibility: These lights are designed to work with a wide voltage range (85-265V AC), making them suitable for most standard electrical systems, including 110V and 220V.
- Heat Dissipation: The thickened lamp body is designed for efficient heat dissipation. Ensure adequate air circulation around the fixtures, especially in enclosed spaces, to maintain optimal performance and lifespan.
- Eye Comfort: The