1. Introduction
The OBDIICAT-VLinker MC/MC+ ELM327 is a versatile OBD2 car diagnostic scanner designed to provide real-time monitoring and protection for your vehicle. It supports various connection types including Bluetooth 3.0, Bluetooth 4.0 (BLE), and WiFi, making it compatible with a wide range of iOS and Android devices. This tool allows you to read and clear error codes, monitor engine parameters, and access advanced diagnostic functions through compatible third-party applications.
Figure 1: OBDIICAT-VLinker MC+ BT 4.0 device overview.
2. Safety Information
Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in damage to the device, vehicle, or personal injury.
- Always operate the vehicle in a safe environment.
- Do not attempt to connect or disconnect the device while the vehicle is in motion.
- Ensure the device is securely connected to the OBD2 port to prevent accidental disconnection.
- Keep the device away from water, extreme temperatures, and direct sunlight.
- Do not disassemble or modify the device.
3. Package Contents
Upon opening your package, please verify that all items are present:
- VLinker MC/MC+ ELM327 Diagnostic Scanner
- Quick Start Guide (Printed Manual)
- Packaging Box
Figure 2: Typical package contents including the device, quick start guide, and box.
4. Specifications
| Feature | Description |
|---|---|
| Item Type | Code Readers & Scan Tools |
| Brand Name | OBDeleven |
| Origin | Mainland China |
| Certification | CE |
| Hign-concerned Chemical | None |
| Software Update | Not applicable (Firmware updates supported for the device, but diagnostic application software is third-party) |
| Data Buffer | Up to 2K bytes |
| UART Baud Rate | Increased to 230.4kbps |
| Power Management | Automatic sleep and start to reduce power consumption |
| Advanced Features | Support user-defined commands, Request bytes up to 48 bytes, Support Firmware Update, Support user-defined APP |
Supported Protocols:
Figure 3: List of supported OBD2 and additional protocols.
- OBD2 Standard Protocols:
- SAE J1850 PWM
- SAE J1850 VPW
- ISO 9141-2
- ISO 14230-4 (slow)
- ISO 14230-4 (fast)
- ISO 15765-4 (CAN)
- More Protocols:
- SAE J1939 (CAN)
- ISO 11898 (raw can)
- Single Wire CAN (For GMLAN)
- Medium Speed CAN (MS-CAN)
5. Setup Guide
Follow these steps to set up your VLinker MC/MC+ device:
Figure 4: Quick Start Guide (English section).
- Download the App: Each diagnostic app has its unique connection process. Scan the QR code provided in the application manual (or search your device's app store) to download a compatible app and access its connection instructions.
- Start the Engine: Ensure your vehicle's engine is running.
- Insert the vLinker MC Bluetooth adapter into the OBD port: Locate your vehicle's OBD2 port (usually under the dashboard on the driver's side) and firmly plug in the vLinker device.
- Press the vLinker MC button: Press the button on the device to activate it.
- Find the Bluetooth name of "vLinker-MC": On your smartphone or tablet, go to Bluetooth settings and search for available devices. Select "vLinker-MC" from the list.
- Request pairing with "vLinker-MC", pairing code "1234": When prompted, enter the pairing code "1234" to establish the connection.
Figure 5: VLinker MC device properly installed in a vehicle's OBD II port.
6. Operating Instructions
Once connected, you can use various third-party diagnostic applications to interact with your vehicle's systems. The vLinker MC/MC+ supports a wide array of functions:
6.1. Supported Applications
The device is compatible with many popular diagnostic apps. Some examples include:
- Torque Lite
- BimmerCode
- FORScan Lite
- OBD Fusion
- JScan
- OBD Auto Doctor
Figure 6: Examples of compatible diagnostic applications.
6.2. Multiple Detection Functions
The vLinker MC/MC+ can monitor and protect cars in real-time by providing access to numerous data items. The specific data available may vary depending on the vehicle's make, model, and year, as well as the capabilities of the diagnostic application used.
Figure 7: Diagram illustrating various detectable parameters.
Commonly monitored parameters include:
- Read error diagnosis codes
- Clear fault codes (clear error code and turn off MIL)
- Engine speed per minute (RPM)
- Load value after calculation
- Coolant temperature
- State of fuel system
- Speed of the car
- Short term fuel condition
- Long term fuel condition
- Air inlet pipe pressure
- Time before oil injection
- Air inlet temperature
- Air velocity
- Absolute throttle position
- Oxygen detection voltage associated with short-term fuel state
- Fuel pressure
- Fuel consumption monitoring
7. Maintenance
To ensure the longevity and optimal performance of your VLinker device, follow these maintenance guidelines:
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Store the device in a cool, dry place when not in use.
- Avoid dropping the device or subjecting it to strong impacts.
- Do not expose the device to liquids or corrosive substances.
8. Troubleshooting
8.1. Common Issues and Solutions
- Device not connecting/pairing:
- Ensure the vehicle engine is running.
- Verify the device is firmly plugged into the OBD2 port.
- Press the button on the vLinker device to ensure it's active.
- Check your phone/tablet's Bluetooth settings and ensure Bluetooth is enabled.
- Confirm you are selecting the correct device name ("vLinker-MC") and using the pairing code "1234".
- Try restarting your phone/tablet and the vehicle.
- App not detecting device:
- Ensure the device is successfully paired via your phone/tablet's system Bluetooth settings first.
- Verify that the diagnostic app you are using is compatible with the vLinker MC/MC+ and supports your device's connection type (Bluetooth 3.0/4.0 or WiFi).
- Check the app's settings to ensure it's configured to connect to the correct adapter type.
- Some apps may require specific permissions (e.g., location services) to be enabled.
- Incorrect product received (e.g., MC instead of MC+):
- If you believe you received a different model than ordered, especially if it affects compatibility (e.g., an MC model that only supports Android when an MC+ for iOS was expected), please contact your seller for resolution.
- Device not working with specific OS (e.g., iOS, Android, Tesla):
- The vLinker MC+ is designed for both iOS and Android. The vLinker MC (non-plus) typically supports Android. Ensure you have the correct model for your operating system.
- Compatibility with specific vehicle brands like Tesla may vary and is often dependent on the third-party application's support for that vehicle's protocols.
8.2. Firmware Updates
The vLinker device supports firmware updates to improve performance and compatibility. You can use the VgateFwUpdate Tool for this purpose.
Figure 8: VgateFwUpdate Tool interface for firmware upgrades.
Firmware Upgrade Steps:
- Open the VgateFwUpdate Tool application.
- Select your connection type (WiFi, Bluetooth, or BLE).
- Scan the upgrade QR code (if provided) or proceed with auto-connect.
- Follow the on-screen prompts to download and install the firmware update.
The tool also provides an option to restore factory settings if needed.
9. User Tips
Based on user experiences, here are some helpful tips:
- For Jeep Grand Cherokee and Dodge Challenger 6.4 2016 owners, JScan is a highly recommended application for use with this device.
- Dodge owners using the Alpha OBD program (Android users) have reported excellent results.
- The device has been confirmed to work well with Volvo V60 (12th year models) and Hyundai i10, offering easy Bluetooth connection and extensive data reading capabilities.
- For BMW E60 models, Bimmerlink is a compatible app that provides reliable diagnostic functions.
- Opel Astra K 2020 and Skoda Octavia 2019 users have found success with Android apps like Car Scanner and JScan.
10. Frequently Asked Questions (FAQ)
- Q: Does it work with BMW E60 530i 2009?
- A: Yes, it works well with BMW models including the E60, connecting reliably via Bluetooth and supporting diagnostic functions through compatible apps like BimmerCode. (Based on buyers' feedback)
- Q: Will this OBD work with Opel Astra K 2020 and Skoda Octavia 2019? Is there a program for Android phones included in the set?
- A: Buyers confirm it works well with various Opel and Skoda models using Android apps like Car Scanner and JScan. No software is included with the device; it pairs reliably with third-party diagnostic apps on Android phones, which you will need to download separately.
11. Warranty and Support
For detailed warranty information, return policies, and further technical support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF document for comprehensive guidance:
For specific product inquiries or issues not covered in this manual, please contact the seller or manufacturer's customer support.