Retekess TR633

Contents

Retekess TR633 AM/FM Radio User Manual

Model: TR633 | Brand: Retekess

Introduction

This manual provides detailed instructions for the safe and effective use of your Retekess TR633 AM/FM radio. Please read this guide thoroughly before operating the device to ensure proper functionality and to understand all features.

Product Overview

The Retekess TR633 is a portable AM/FM radio designed for ease of use, featuring a large frequency display, clear sound, and multiple power options. It is suitable for various environments, from indoor listening to outdoor activities.

Retekess TR633 AM/FM Radio front view with key features highlighted

Figure 1: Front view of the Retekess TR633 radio, highlighting FM/AM bands, indicator lights, large screen, and ease of operation.

Controls and Components

Side view of Retekess TR633 radio with labels for portable handle, volume knob, 3.5mm external antenna jack, and 3.5mm headphone jack.

Figure 2: Side view of the radio showing the portable handle, volume knob, 3.5mm external antenna jack, and 3.5mm headphone jack.

Front view of Retekess TR633 radio with labels for tuning knob and band/power switch.

Figure 3: Front view of the radio showing the tuning knob and band/power switch.

  1. Handle
  2. Frequency indication window
  3. Built-in speaker
  4. Function switch (OFF/FM/AM)
  5. Tuning knob
  6. Volume knob
  7. Tuning indicator light (green)
  8. Power indicator (red)
  9. Battery compartment
  10. Telescopic antenna
  11. Labels (product information)
  12. AC-IN jack
  13. AM external antenna jack
  14. Headphone jack

Video 1: A short demonstration of the Retekess TR633 radio's features and ease of use.

Setup

Power Supply

The TR633 radio supports two power supply methods: AC power and DC battery power.

Diagram showing two charging methods: AC power cable and 4 AA batteries.

Figure 4: Two power supply options for the TR633 radio.

DC Battery Power

  • Open the battery compartment (9) on the back of the radio.
  • Insert 4 AA 1.5V batteries, ensuring correct polarity as indicated inside the compartment.
  • Close the battery compartment.

Note: Battery power will be disconnected automatically when the AC cable is used.

AC Power

  • Insert the plug of the AC power cable into the AC-IN jack (12) on the side of the radio.
  • Connect the other end of the AC cable to a wall outlet. Ensure the voltage matches the label on the radio (110V or 220V).

Operation

FM/AM Listening

  1. Adjust the function switch (4) to the FM or AM position. The red power indicator light (8) will illuminate.
  2. Rotate the tuning knob (5) and observe the frequency indication window (2) to select a station.
    Close-up of the radio's tuning dial and indicator lights.

    Figure 5: Tuning knob and indicator lights. The green light indicates a stable signal.

    • When a strong signal is received, the green tuning indicator light (7) will turn on.
    • If the signal is weak, the green tuning indicator light will not turn on.
  3. Rotate the volume knob (6) to adjust the sound level.

Antenna Operation

  • For FM reception: Fully extend the telescopic antenna (10) for optimal listening.
    Diagram showing the 360-degree rotatable telescopic antenna for FM/AM reception.

    Figure 6: The telescopic antenna can be rotated 360 degrees for better reception.

  • For AM reception: The radio uses an internal AM antenna. Rotate the entire radio body to find the best reception.
  • External AM Antenna: An external AM antenna can be connected via the 3.5mm external antenna jack (13) for improved reception.

Using Headphones

  • Insert a 3.5mm headphone plug into the headphone jack (14).
  • The built-in speaker will automatically be disconnected, allowing private listening through headphones.

Turning Off the Radio

  • Set the function switch (4) to the "OFF" position.

Note: When operating on battery power, if the power indicator light (8) is constantly red, it indicates that the battery power is below 5% and needs replacement.

Maintenance and Safety

General Care

  • Keep the radio dry. Avoid exposure to rain, moisture, or liquids.
  • Clean the radio with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Avoid extreme temperatures. Do not place the radio near heat sources or in direct sunlight for extended periods.
  • Handle with care. Do not drop or subject the radio to strong impacts.

Safety Warnings

Avoid Choking Hazard

WARNING: Small parts. Not for children under 3 years.

Protect Your Hearing

WARNING:

  • Use the lowest volume necessary for your listening.
  • Increase volume only if you are in noisy surroundings.
  • Turn down the volume before adding a headset or earpiece.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Excessive sound pressure from earphones and headphones can cause hearing loss.
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing can be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.

Troubleshooting

ProblemPossible CauseSolution
No power / Radio does not turn on
  • Batteries are dead or incorrectly inserted.
  • AC cable is not properly connected or power outlet is faulty.
  • Function switch is in "OFF" position.
  • Replace batteries or ensure correct polarity.
  • Check AC cable connection and try a different outlet.
  • Set function switch to "FM" or "AM".
Poor reception / Static noise
  • Antenna not extended (FM).
  • Radio orientation (AM).
  • Weak signal in the area.
  • Interference from other electronic devices.
  • Fully extend the telescopic antenna for FM.
  • Rotate the radio for better AM reception.
  • Try moving to a different location or connecting an external AM antenna.
  • Move the radio away from other electronics.
No sound from speaker / Sound only from headphones
  • Headphones are plugged in.
  • Volume is too low.
  • Unplug headphones to enable speaker.
  • Increase volume using the volume knob.

Specifications

FeatureDetail
Frequency Range (Europe)FM: 87.5-108MHz, AM: 530-1600kHz
Frequency Range (USA)FM: 88-108MHz, AM: 520-1710kHz
AM Sensitivity< 80dBµ
FM Sensitivity< 10dBµ
Output Power0.8W
Power SupplyDC 6V (4 AA 1.5V batteries) / AC 110V or AC 220V
Dimensions (WxHxD)222x79x140mm
Weight798g
Body MaterialPlastic
ScreenYes
FunctionBuilt-In Speaker
CertificationCE, FCC

User Tips

  • For elderly users, the large frequency adjustment dial and clear sound make this radio very user-friendly.
  • The portable handle makes it convenient to carry for outdoor activities like walking or camping.
  • Even without fully extending the antenna, many users report good reception and clear sound, especially for FM stations.
  • The radio's retro design is appreciated by many users.
  • If using AC power, remember that battery power is automatically disconnected.

Warranty and Support

Warranty Information

Most new Retekess products come with a two-year manufacturer's warranty from the date of purchase. Please retain your guarantee card and proof of purchase for any warranty claims.

Exclusions from Warranty Coverage:

  • Damage caused by accident.
  • Damage resulting from misuse, abuse, unauthorized alterations, or repairs.
  • If the serial number has been altered, defaced, or removed.

Contact and Support

For support, warranty service, or inquiries, please contact your seller or refer to the manufacturer's contact information:

  • Manufacturer: Henan Eshow Electronic Commerce Co., Ltd.
  • Address: 7/F, Sanjiang Building, No. 170 Nanyang Road, Huiji District, Zhengzhou, Henan, China
  • E-mail: support@retekess.com
  • Website: www.retekess.com

For EU customers, you may also contact:

  • EU Importer: Germany Retevis Technology GmbH
  • Address: Uetzenäcker 29, 38176 Wendeburg
  • E-mail: Retevis-Europa@outlook.com
  • Tel: +0049 053029369179

Safety and Compliance Information

ATTENTION: Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

Local Government Regulations

When radios are used as a consequence of employment, the Local Government Regulations requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

FCC Requirements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CE Requirements

(Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at the following internet address: www.retekess.com.

Disposal

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

WEEE symbol indicating separate collection of electrical and electronic equipment.

Figure 7: WEEE symbol for proper disposal.

IC Requirements

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Warning Statements

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

WARNING: Do NOT operate the radio without a proper antenna connected, as this may damage the radio and cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared. To avoid interference, turn off the radio in areas where signs are posted to do so. Do NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.