Ligghig ZS19-1 Headlamp

Contents

Ligghig Mini LED Headlamp ZS19-1 Instruction Manual

Model: ZS19-1

Introduction

Thank you for choosing the Ligghig Mini LED Headlamp ZS19-1. This versatile and portable clip-on headlamp is designed for various outdoor activities such as camping, fishing, hiking, cycling, and night running. Featuring intelligent gesture sensing, multiple lighting modes, and a convenient USB rechargeable battery, it provides reliable illumination wherever you go. Please read this manual carefully to ensure proper use and maintenance of your device.

Ligghig Mini LED Headlamp ZS19-1 with USB cable and 180-degree rotation diagram
Product overview showing the headlamp, USB charging cable, and a diagram illustrating 180-degree rotation capability.

Package Contents

Please check the package for the following items:

  • 1 x Sensor Headlight (ZS19-1)
  • 1 x USB Data Cable

Specifications

Feature Detail
Brand Name Ligghig
Model Number Headlamp (ZS19-1)
Light Source LED Bulbs
Model of LED Beads T6
Wick Brightness 100lm
Irradiation Range 30-50m
Sensing Range 25cm
Beam Angle 180°
Battery Type Built-in LITHIUM ION
Battery Capacity 1000 mAh
Charging Input 5V USB interface
Charging Time 2 hours
Working Hours 8-12 hours (depending on mode)
Material ABS
Waterproof Grade IPX4 life grade waterproof (not for submersion)
Switch Mode High/Low, Push Button Switch/Motion Sensor Switch
Available Colors Black, Red, Blue
Dimensions Approx. 6.2 cm (length) x 5 cm (width) x 2 cm (height)
Diagram showing the dimensions of the headlamp: 6.2cm length, 5cm width, 2cm height.
Approximate dimensions of the ZS19-1 Headlamp.

Setup

  1. Attaching the Headlamp

    The ZS19-1 headlamp features a clip-on design, allowing it to be easily attached to the brim of a cap or hat. Ensure the clip is securely fastened to prevent the headlamp from falling during use.

    Diagram showing the headlamp clipped onto a hat, with arrows indicating 180-degree rotation and various outdoor activities like hunting, fishing, cycling, hiking, camping, and running.
    The headlamp can be clipped onto a hat and rotated 180 degrees for optimal lighting.
  2. Adjusting the Beam Angle

    The headlamp supports 180-degree angle adjustment. Once clipped, you can manually rotate the light module to direct the beam precisely where needed, enhancing visibility and convenience.

    Image showing the headlamp with a wider exposure range and indicating 180-degree adjustment capability.
    Wider exposure range is achieved through 180-degree adjustment.

Operating Instructions

  1. Power On/Off and Mode Selection (Push Button)

    Locate the 'routine' button on the top of the headlamp. Press the button to cycle through the lighting modes:

    • Strong Light Mode: Provides maximum illumination for clear visibility over longer distances (30-50m).
    • Low Light Mode: Offers reduced brightness for closer tasks or to conserve battery life.
    Two images comparing strong light mode and weak light mode of the headlamp.
    The headlamp offers two lighting modes: Strong Light and Weak Light.
  2. Gesture Sensing Control

    The headlamp is equipped with an intelligent infrared sensor for hands-free operation. To activate or deactivate the light using gesture control:

    • Press the 'induction' button to enable gesture sensing mode.
    • Wave your hand within the sensing range (approx. 25cm) in front of the headlamp to turn the light on or off. This is particularly convenient in dark environments or when your hands are occupied.
    Image demonstrating gesture sensing control where a hand waves in front of the headlamp to control the light.
    Gesture sensing allows for convenient hands-free control of the headlamp.

Charging Instructions

The headlamp has a built-in 1000 mAh lithium-ion battery and supports USB charging.

  1. Connecting for Charge

    Connect the provided USB data cable to the Micro USB charging port on the headlamp. Plug the other end into a 5V standard USB power source, such as a computer, power bank, wall charger, or outdoor power supply.

    Diagram showing the headlamp connected to a power bank via USB cable, with icons for various charging sources: charger, power bank, computer host, and outdoor power supply.
    The headlamp can be charged via various 5V USB power sources.
  2. Power Display

    The headlamp features an LED screen design that displays the battery status in four levels: 100%, 75%, 50%, and 25%. This allows you to monitor the battery life and charge the device in a timely manner, avoiding inconvenience during use.

    Image showing the headlamp's four-level power display (100%, 75%, 50%, 25%) and indicating the Micro USB charging port.
    Four-level power display and Micro USB charging port.
  3. Charging Time and Working Hours

    A full charge typically takes approximately 2 hours. Once fully charged, the headlamp can provide 8-12 hours of working time, depending on the selected lighting mode.

Maintenance

  • Water Resistance

    The headlamp has an IPX4 life grade waterproof rating, meaning it is resistant to splashing water from any direction. It can work as usual on rainy days. However, it is NOT designed to be submerged in water.

    Image showing the headlamp in a rainy environment with text 'LIFE WATERPROOF Work as usual on rainy days'.
    The headlamp is life waterproof and can be used on rainy days.
  • Cleaning

    Wipe the headlamp with a soft, damp cloth to remove dirt or debris. Do not use harsh chemicals or abrasive cleaners.

  • Storage

    Store the headlamp in a cool, dry place when not in use. If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months to maintain battery health.

Troubleshooting

  • Light Not Turning On

    Ensure the battery is charged. Check the power display. If the battery is low, recharge the device. If fully charged, try pressing the routine button multiple times to ensure it's not in gesture sensing mode or stuck.

  • Gesture Control Not Responding

    Make sure the 'induction' button is pressed to enable gesture sensing. Ensure your hand is within the 25cm sensing range and the motion is clear. Obstructions or extreme light conditions might affect sensor performance.

  • Battery Not Charging

    Verify that the USB cable is securely connected to both the headlamp and the power source. Try a different USB cable or power adapter. Ensure the power source is active and providing 5V output.

User Tips

  • Many users find this headlamp to be a good value for money, offering satisfactory performance for its price point.
  • The hands-free lighting provided by the gesture sensor is particularly useful for activities like fishing and camping, allowing for uninterrupted work.
  • The long-lasting lithium-ion battery ensures extended use during outdoor adventures.
  • Its lightweight design means it can be worn for extended periods without discomfort and easily stored in a pocket when not in use.

Frequently Asked Questions (FAQ)

Q: Under which category does this product fall?
A: It falls under the category of headlamps.
Q: What are the benefits of using this headlamp?
A: The benefits include hands-free lighting, suitability for fishing and camping activities, and a long-lasting lithium-ion battery.
Q: What are the highlights of this headlamp?
A: Key highlights include its waterproof design, a wide 180° beam angle, and High/Low switch modes.

Application Scenarios

The Ligghig Mini LED Headlamp ZS19-1 is ideal for a wide range of activities:

Grid of images showing various application scenarios for the headlamp: night running, fishing, biking, camping, hiking, and hunting.
Versatile for night running, fishing, biking, camping, hiking, and hunting.

Warranty and Support

For any questions, issues, or support needs regarding your Ligghig Mini LED Headlamp ZS19-1, please refer to the official user manual PDF or contact the seller directly. The official user manual (PDF) can be viewed here.

© 2023 Ligghig. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.