XTOOL TS100PRO

Contents

XTOOL TS100PRO TPMS Sensor User Manual

Model: TS100PRO | Brand: XTOOL

XTOOL TS100PRO TPMS Sensor and a tire

1. Introduction

The XTOOL TS100PRO TPMS Sensor is a universal, programmable tire pressure monitoring system sensor designed to replace faulty or aging OEM sensors. It features dual-frequency capabilities (315MHz and 433MHz) for broad vehicle compatibility and can be easily programmed using compatible XTOOL TPMS tools like the TP150 or IP819TP.

Features of XTOOL TS100 TPMS Sensors: 98% vehicle coverage, SAE standards, 100% ID clone-able, 5-year durability, 2-in-1 dual frequencies, program up to 8 sensors.

Figure 1: Key Features of XTOOL TS100PRO TPMS Sensors

2. What's in the Box

Each XTOOL TS100PRO TPMS Sensor package typically includes:

  • XTOOL TS100PRO TPMS Sensor (Rubber Version)
  • Valve Stem Assembly (pre-attached or separate, depending on packaging)
  • User Manual (refer to the official PDF for comprehensive details: XTOOL TS100PRO User Manual PDF)

3. Setup and Installation

Installation of the TS100PRO sensor involves both physical mounting within the wheel and electronic programming. It is recommended that installation and programming be performed by a qualified technician.

3.1 Sensor Components

Exploded view of XTOOL TS100PRO sensor components: Sensor Body, Screw, Valve Stem, Rubber Grommet, Valve Core Assembly, Cap, Air nozzle, Air nozzle cap, Fixing nut, Leak proof air cushion, Tire pressure sensor, Set screw.

Figure 2: XTOOL TS100PRO Sensor Exploded View and Components

The sensor consists of the main sensor body, a valve stem (rubber in this version), a fixing nut, and a valve cap. The internal components include a high-quality battery and a Freescale FXTH87 series chip for accurate pressure readings.

3.2 Physical Installation

Follow these general steps for physical installation:

  1. Remove the tire from the wheel rim.
  2. Remove the old TPMS sensor (if applicable).
  3. Insert the new XTOOL TS100PRO sensor's valve stem through the valve hole on the wheel rim from the inside.
  4. Secure the sensor by tightening the fixing nut from the outside of the rim. Ensure the sensor body is properly seated and remains at a 90-degree angle to the rim surface.
  5. Mount the tire back onto the wheel rim, taking care not to damage the sensor.
  6. Inflate the tire to the manufacturer's recommended pressure.

Video 1: XTOOL TS100PRO Sensor Overview and Installation Demonstration. This video illustrates the sensor's features, internal components, and the physical installation process into a wheel rim.

3.3 Electronic Programming

After physical installation, the sensor must be programmed and relearned to the vehicle's TPMS system using a compatible XTOOL TPMS tool (e.g., TP150, IP819TP).

  1. Connect your XTOOL TPMS tool to the vehicle's OBD-II port (if required for relearn procedure).
  2. Select the appropriate vehicle make, model, and year on the TPMS tool.
  3. Choose the desired programming method (e.g., Copy by OBD, Copy by Activation, Manual Input, Auto Create).
  4. Follow the on-screen instructions on your XTOOL TPMS tool to program the sensor(s). The tool can program up to 8 sensors at once.
  5. Perform the TPMS relearn procedure as prompted by the tool or vehicle manufacturer's specifications.
XTOOL TS100PRO sensor being programmed by an XTOOL TPMS tool (TP150/IP819TP).

Figure 3: XTOOL TS100PRO Sensor Programming with a Compatible TPMS Tool

4. Operating Instructions

The XTOOL TS100PRO sensor operates by transmitting tire pressure and temperature data wirelessly to the vehicle's TPMS receiver. Its operation is passive once installed and programmed.

  • Dual Frequency: The sensor supports both 315MHz and 433MHz frequencies, automatically adapting to the vehicle's requirements during programming.
  • Activation: Sensors are typically activated by the TPMS tool during the programming process or by driving the vehicle after installation and relearn.
  • Monitoring: Once active, the sensor continuously monitors tire pressure and temperature, sending data to the vehicle's TPMS module.
Global map showing vehicles with 315MHz and 433MHz frequencies, indicating wide coverage for XTOOL TS100PRO sensors.

Figure 4: XTOOL TS100PRO Dual Frequency Coverage

5. Maintenance

The XTOOL TS100PRO TPMS Sensor is designed for long-term, maintenance-free operation.

  • Battery Life: The sensor is equipped with a high-quality battery designed to last for approximately 5 years under normal operating conditions. The battery is not user-replaceable.
  • Durability: Constructed with high-quality materials and meeting SAE standards, the sensor is built to withstand typical road conditions and temperature variations.
  • Valve Stem: Periodically check the rubber valve stem for any signs of cracking or damage. Replace if necessary.

6. Troubleshooting

If you encounter issues with your TPMS system after installing XTOOL TS100PRO sensors, consider the following:

  • TPMS Light Remains On: Ensure the sensor programming and relearn procedures were completed successfully. Drive the vehicle for a few miles at speeds above 15 mph to allow the system to reset.
  • Sensor Not Detected: Verify that the sensor was correctly installed and that the programming tool is compatible and up-to-date. Re-attempt the programming and activation process.
  • Incorrect Pressure Reading: Double-check tire pressure with a reliable gauge. If the discrepancy persists, the sensor might be faulty or improperly programmed.
  • Compatibility Issues: While the TS100PRO offers 98% vehicle coverage, always confirm compatibility for your specific vehicle's VIN, year, make, and model.

For advanced diagnostics, refer to the user manual of your XTOOL TPMS programming tool.

7. Specifications

FeatureSpecification
Model NameTS100PRO
BrandXTOOL
Frequency315MHz & 433MHz (Dual Frequency)
Pressure AccuracyAccurate to 0.1 Bar
ChipFreescale FXTH87 series chip
MaterialRubber
Item Weight0.2 kg
Item Dimensions (Sensor Body)46.4mm (W) x 16.2mm (D) x 25mm (H)
Overall Height (Sensor + Stem)Approx. 79mm
External Testing CertificationCE
Battery LifeApprox. 5 years

8. User Tips

  • Authenticity: To ensure you receive genuine XTOOL TS100PRO sensors, purchase from XTOOL approved stores, often indicated by a 'gold badge' or official store status.
  • Compatibility Check: Before purchasing or installing, always verify the sensor's compatibility with your specific vehicle's VIN, year, make, and model.
  • Professional Installation: For best results and to avoid damage, have the sensors installed and programmed by a certified automotive technician.

9. Warranty and Support

  • Warranty: The XTOOL TS100PRO TPMS Sensor comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
  • Technical Support: XTOOL offers 24-hour online technical support. For assistance, please visit the official XTOOL website or contact their customer service.
  • Further Information: For detailed operational guides, troubleshooting steps, and warranty information, please refer to the comprehensive official user manual PDF: XTOOL TS100PRO User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.