1. Product Overview
This product is a medium-high tone alarm buzzer, constructed from durable ABS flame-retardant material. It is designed to emit a high-loudness alarm sound of 120dB, making it suitable for various applications including home security, industrial alarms, and anti-theft systems. Its design ensures easy installation and broad compatibility with existing alarm systems.


2. Setup and Installation
2.1 Applicable Scope
- Rated Voltage: DC12V (compatible with DC6-12V)
- Rated Power: 15W
- Rated Current: <100mA
- Siren Decibel: 120dB
- Applicable Scenarios: Home security, industrial alarm, anti-theft systems, etc.
2.2 Operating Steps
- Select Installation Location: Choose a suitable location for the siren. It can be fixed using an adhesive sticker (if provided) or by drilling and mounting with screws.
- Connect to Alarm System: Connect the alarm access plug of the siren to your alarm host or other triggering devices.
- Verify Wiring: Ensure that the positive (red) and negative (black) wiring is connected correctly. Incorrect polarity can damage the device.
- Power On: Once wiring is confirmed, turn on the power supply to the alarm system.

3. Operation
Once properly installed and connected to an alarm host, the siren will activate when the alarm host is triggered. Upon activation, the siren will emit a high-loudness alarm sound of 120dB.
4. Maintenance
- Cleanliness: Keep the equipment clean and dry. Avoid any liquids from entering the interior of the siren.
- Wiring Check: Regularly inspect the wiring to ensure it remains firm and secure, preventing poor contact or disconnections.
- Storage: If the siren will not be used for an extended period, disconnect it from the power supply and store it in a dry, well-ventilated area.
5. Troubleshooting
- No Sound or Abnormal Sound: If the alarm sound is abnormal or there is no response when triggered, first check the power supply connection. Ensure that the positive and negative wiring is correctly connected (red to positive, black to negative). Verify that the alarm host is functioning correctly and sending a trigger signal.
- Sound Level Not 120dB: If the siren does not reach the expected 120dB output, ensure it is connected to a stable DC12V power source. Fluctuations or insufficient power can affect performance. Also, confirm the alarm host provides an adequate trigger signal.
6. Specifications
| Feature | Detail |
|---|---|
| Rated Voltage | DC12V (compatible with DC6-12V) |
| Rated Power | 15W |
| Rated Current | <100mA |
| Siren Decibel | 120dB |
| Material | ABS Flame-Retardant Material |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| High-Concerned Chemical | None |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 6 cm x 6 cm x 5 cm |
| Package Weight | 0.066 kg |

7. Safety Information and Usage Restrictions
7.1 Safety Precautions
- Hearing Protection: The siren produces a very loud 120dB sound. Avoid close contact with the siren during operation to prevent potential hearing damage.
- No Disassembly: Do not attempt to disassemble or modify the equipment. Doing so will void the warranty and may lead to safety hazards.
- Keep Away from Children: Ensure the siren is installed out of reach of children to prevent danger caused by misoperation.
- Abnormal Operation: If the equipment emits smoke, a peculiar smell, or abnormal heat, immediately disconnect the power supply and keep it away from any flammable materials.
- Electromagnetic Interference: Do not use the siren in environments with strong electromagnetic interference, as this may affect its proper function.
7.2 Usage Restrictions
- Power Supply: Do not connect the siren to a power supply outside the DC6-12V range to avoid damaging the equipment.
- Environment: Do not use the siren in flammable or explosive environments.
- Continuous Operation: Avoid long-term continuous operation to prevent overheating of the equipment.
- Not a Fire Alarm: This device cannot be used as a professional fire alarm device.
8. User Tips
- For optimal performance and to ensure the full 120dB output, always connect the siren to a stable DC12V power source.
- During installation, double-check the wiring polarity (red wire to positive, black wire to negative) to prevent damage to the siren or the alarm system.
- After completing the installation, perform a test of the alarm system to confirm that the siren is operating correctly and producing the expected sound level.
9. Warranty and Support
For specific warranty details, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your product seller directly.
10. Applicable Regulations and Harmonized Standards
This product complies with the following standards:
- EN 50131-1:2017: Requirements for the design, installation, configuration, and use of alarm systems.
- EN 60950-1:2006: Safety requirements for information technology equipment.
- Complies with the EU CE Certification Standard.