Yamaha JP-F-WL-YAMAHA-R15-V3-01

Contents

Motorcycle Front Fairing Winglet Instruction Manual

Model: JP-F-WL-YAMAHA-R15-V3-01

1. Introduction

This manual provides essential information for the safe and effective installation and use of your new Motorcycle Front Fairing Winglet. This accessory is designed to enhance the aesthetic and aerodynamic profile of your motorcycle, while also helping to keep the bike clean.

The winglet is made from high-quality ABS plastic, ensuring durability and resistance to wear. It features an anodic oxidation finish, which helps prevent fading and rust.

Compatibility: Specifically designed for Yamaha R15 V3 models from 2017 to 2021.

2. Safety & Warnings

Important Safety Information:

Read all instructions thoroughly before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord (if applicable) out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product carefully before each use; do not use if damaged.
  • Follow all installation and operation guidelines to avoid injury.
  • Avoid impact or forceful striking to the product.
  • Adjust the product carefully according to its placement position.
  • Do not install violently to prevent product damage.

3. Package Contents

Upon opening the package, please ensure all items are present and in good condition:

  • 1x Motorcycle Front Fairing Winglet
  • Assorted Fasteners (e.g., clips, push-type retainers) - 50 pieces (as shown in image)
Blue winglet with a box of 50 assorted fasteners
Example of included fasteners with a blue winglet.

4. Specifications

Attribute Detail
Product Name Motorcycle Front Fairing Winglet
Model JP-F-WL-YAMAHA-R15-V3-01
Batch/Serial Number JP27174
Motobike Make Yamaha
Compatible Models Yamaha R15 V3 (Years: 2017, 2018, 2019, 2020, 2021)
Material ABS Plastic
Design Pattern Shark Fin, Beak
Dimensions (Approx.) Width: 420mm (16.5 inches), Max Height: 220mm (8.66 inches)
Weight (Approx.) 0.098 kg
Origin Mainland China
Dimensional drawing of the winglet
Approximate dimensions of the winglet.

5. Installation Instructions

The Motorcycle Front Fairing Winglet is designed for direct installation on compatible Yamaha R15 V3 models.

  1. Preparation: Ensure your motorcycle's front fairing area, specifically the air intake under the headlight, is clean and free from dirt or debris.
  2. Positioning: Carefully align the winglet with the air intake area under the headlight. The design is intended for a 'perfectly compatible' fit in this position.
  3. Securing: Use the provided fasteners to secure the winglet firmly in place. Refer to the underside view image for typical mounting points. Ensure the winglet is adjusted correctly to its placement position before tightening.
  4. Final Check: After installation, gently check the winglet for stability. Ensure it is securely attached and does not wobble.
Diagram showing winglet installation location
Installation position: Air intake under the headlight.
Underside view of black winglet showing mounting points
Underside view showing typical mounting points.

6. Operating Instructions

Once installed, the winglet operates passively as an aerodynamic accessory. It is designed to complement your motorcycle's existing structure and may contribute to keeping the front of the bike cleaner by deflecting some road spray.

7. Care and Maintenance

  • Cleaning: Clean the winglet regularly with a soft cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the ABS material or its finish.
  • Inspection: Periodically check the winglet for any signs of damage, cracks, or loose fasteners. Ensure all mounting points remain secure.
  • Protection: The anodic oxidation finish is designed to resist fading and rust, but prolonged exposure to extreme weather conditions may still affect its appearance over time.

8. Troubleshooting

  • Product does not fit: This winglet is specifically designed for Yamaha R15 V3 (2017-2021). If you have a different model or year, modifications may be required, or the product may not be compatible.
  • Product arrived damaged: Inspect the product immediately upon receipt. If it arrived broken or damaged, do not attempt to install it.
  • Loose installation: Ensure all fasteners are correctly installed and tightened. Avoid violent installation, which can damage the product or mounting points.
  • Scratches during installation: Handle the winglet carefully during installation to prevent scratching the finish.

9. User Tips

  • The winglet is noted for its lightweight and resistant properties, contributing to the bike's aesthetics without adding significant weight.
  • Consider applying protective tape (e.g., Versa tape) for customization or to create a visual contrast on your motorcycle.
  • If you plan to paint the winglet, ensure proper surface preparation for optimal adhesion and finish.

10. Frequently Asked Questions (FAQ)

Q: What is the primary use of this item?
A: It is an accessory used for motorcycles, specifically a front fairing winglet.
Q: What is the design pattern of this winglet?
A: The item's design follows a 'Shark Fin' and 'Beak' aesthetic.
Q: Will this fit my Yamaha R15v2, CF Moto 300SR, Honda RR 1000, RC 200, Ninja 400, Yamaha R125 2022, Yamaha FZ1 Fazer 2008, Yamaha YZF1 2008, or Yamaha R1 2007 model?
A: This product is specifically designed for the Yamaha R15 V3 (2017-2021). While some users may attempt modifications for other models, guaranteed compatibility is only for the specified Yamaha R15 V3 range. Please verify fitment for other models at your own discretion.

11. Warranty & Support

For any questions regarding installation, product defects, or general inquiries, please contact the manufacturer or your point of purchase. Please refer to the original product listing or packaging for specific warranty terms and conditions.

Manufacturer: Guangzhou Jiepu Trading Co., Ltd

EU Authorized Representative: Ubuy SAS

User manual (PDF): A detailed user manual in PDF format may be available for download. Please check the product page or contact customer support for access. View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.