Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Zigbee 3.0 Constant Current CCT LED Driver, Model PB-12A-2(WZS). This device is designed for controlling CCT (Correlated Color Temperature) LED strips, offering dimming and color temperature adjustment capabilities through smart home platforms.
Features
- Tuya smart APP cloud control for color temperature and brightness adjustment, delay turn on/off, timer run, scene edit, sleep wake-up, and biorhythms function.
- Philips HUE APP control by connecting with a Philips HUE bridge.
- Voice control support for Amazon Alexa, Google Assistant, Tmall Genie, and Xiaodu voice assistant.
- Can relay and route to each other, up to 15 hops.
- Compatible with Zigbee 3.0 remote or scene panel control (optional).
- Reset key for clearing network connection.
- Universal AC input / Full range.
- Flicker-free operation.
- 2 channel constant current output, configurable current via DIP switch.
- Over-load / Short circuit protection with automatic recovery.
- Full protective plastic case.
- Suitable for indoor LED lighting applications.
- 5-year, 50,000-hour warranty.
Applications:
- Suitable for downlight, spotlight, and decorative applications.
- Ideal for Office / Commercial / Domestic lighting, Hotels, Classrooms, Warehouses, Health care, Retail, and Display.
- Use for retrofit upgrades & new luminaire designs.

Specifications
| Category | Parameter | Value |
|---|---|---|
| Output | Output Voltage | 10-42VDC |
| Output Current | 2x(150-450)mA | |
| Output Power | Max. 12W | |
| Max Output Voltage | 48VDC | |
| Dimming Range | 0-100% | |
| Input | Input Voltage Range | 100-240VAC |
| Frequency Range | 50/60Hz | |
| Input Current | 0.35A Max. | |
| Protection | Overload | Hiccup, recovers automatically after fault condition is removed |
| Short circuit | Hiccup, recovers automatically after fault condition is removed | |
| Environment | Working Temperature | -20°C-50°C |
| Working Humidity | 20%~90%RH, non-condensing | |
| IP Rating | IP20 | |
| Safety & EMC | Security Specifications | IEC/EN61347-1, IEC/EN61347-2-13 |
| Withstand Voltage | I/PO/P: 3750VAC | |
| Certifications | CE |

Setup
Mechanical Structures and Installations
The LED driver has dimensions of 140mm (length) x 38mm (width) x 20.5mm (height). It features AC N and AC L inputs, and LED+, WW-, CW- outputs. A DIP switch is present for current selection, and a reset key is available for network connection.

LED Current Selection
The output current (lout) of the LED driver can be configured using the DIP switches. Refer to the table below to set the desired current based on your LED strip's voltage requirements:
| DIP Switch Position | Output Voltage (Uout) | Output Current (lout) |
|---|---|---|
| ON (all switches) | 10-42V | 150mA |
| OFF (all switches) | 10-42V | 250mA |
| Specific combination | 10-34V | 350mA |
| Specific combination | 10-27V | 450mA |
System Wiring
The LED driver integrates into a Zigbee smart home system. Connect the AC power input to the driver. The driver's outputs (LED+, WW-, CW-) connect to your WWCW LED lights. The system requires a WiFi router and a Tuya Zigbee Gateway (or a smart panel with integrated Zigbee gateway function) for remote and voice control via a mobile phone or devices like Amazon Echo.

Important Notes for Wiring:
- The recommended distances in the diagram are for spacious, obstacle-free environments. Actual test distances should be considered during installation.
- Ensure your WiFi router operates in the 2.4GHz band; the 5GHz band is not supported. Do not hide your router network.
- Maintain close proximity between the LED driver and the router, and verify WiFi signal strength.
- A Tuya Zigbee gateway is essential for remote control and voice control functionalities.
Operating Instructions
1. Network Pairing
- Download the Tuya smart APP, register an account, and search for the Tuya Zigbee gateway device.
- To clear any previous network connection and enter pairing mode, quickly press the "RESET NET" button five times, or cycle power on/off five times. The output light will breathe (blink) to indicate pairing mode.
- Within the Tuya APP, under the gateway settings, search and add the new device. Upon successful network connection, the ZBS-CCT device will appear in your Tuya APP.
2. Lighting Control Settings
After successfully pairing the light device:
- Click on the device in the Tuya APP to access its controls.
- Adjust brightness and color temperature using the touch brightness slide and color wheel interface.
- In the "Scene" section, you can recall or customize up to 4 different lighting scenes.
- The "Setting" section provides access to advanced functions such as Plan, Schedule, Timer, Rhythms, and Power-on behavior.

User Tips
- Philips Hue Compatibility: This driver supports Philips HUE APP control when connected via a Philips HUE bridge. Ensure your Hue bridge is properly set up and connected to your network.
- Optimal WiFi Signal: For reliable operation, ensure the LED driver is within good range of your WiFi router and Tuya Zigbee Gateway. Weak signals can lead to connectivity issues.
- DIP Switch Settings: Double-check the DIP switch settings for output current before connecting your LED strips to prevent damage due to incorrect current.
Troubleshooting
- Device Not Responding: Check power connections. Ensure the Zigbee gateway is online and the device is within range. Try resetting the device by cycling power five times to re-enter pairing mode and re-add it in the Tuya APP.
- Lights Not Dimming/Changing Color: Verify the LED current selection via DIP switches matches your LED strip's requirements. Ensure the device is properly paired and responsive in the Tuya APP.
- Voice Control Issues: Confirm that your smart assistant (Alexa, Google Home) is correctly linked to your Tuya account and the device is recognized. Check your internet connection.
- Flickering Lights: Ensure stable power supply. If flickering persists, check wiring connections and verify the LED strip compatibility with the driver's output current.
Maintenance
The Zigbee LED Driver is designed for low maintenance. Follow these guidelines to ensure longevity:
- Cleaning: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners or solvents.
- Environment: Ensure the device is installed in a dry environment, away from direct sunlight, high temperatures, and excessive humidity. The working temperature range is -20°C to 50°C.
- Inspections: Periodically check wiring connections for any signs of wear or damage.
Warranty and Support
This Zigbee 3.0 Constant Current CCT LED Driver comes with a 5-year, 50,000-hour warranty, covering manufacturing defects and performance issues under normal use. For technical support or warranty claims, please contact your retailer or the manufacturer directly.
For a detailed user manual in PDF format, you can refer to the official document: User Manual (PDF).