AELED 12V 10W COB Light Bead

Contents

AELED 12V 10W COB LED Lamp Chip User Manual

Model: 12V 10W COB Light Bead

Introduction

This manual provides essential information for the safe and efficient use of your AELED 12V 10W COB LED Lamp Chip. Please read these instructions carefully before installation and operation, and retain them for future reference.

Safety Information

  • Always disconnect power before installing or servicing the LED chip.
  • Ensure proper heat dissipation. The LED chip generates heat during operation and requires an adequate heatsink. Failure to do so will significantly reduce its lifespan and may cause damage.
  • Do not look directly into the illuminated LED chip, as it can cause eye strain or damage.
  • Handle the LED chip with care to avoid physical damage to the chip or its connections.
  • This product is designed for 12V DC input (or specified voltage for certain colors like Red). Connecting to incorrect voltage will damage the chip.
  • An LED driver (power supply) is required and is not included with this product. Ensure the driver matches the voltage and current requirements of the LED chip.

Package Contents

  • 1 x High Power Integrated LED Lamp Chip

Note: LED Driver is not included.

Specifications

Feature Specification
Model Type High Power Integrated Chip Lamp Beads
Wattage 10W
Forward Voltage 9-12V (Red: 6-7V)
Current 900mA (Red: 1500mA)
Chip Size 30Mil
Luminous Flux 800LM
Beam Angle 120 degrees
Working Temperature -20°C to 60°C
Life Span 100,000 Hours
Certification CE
High-concerned chemical None
Item Type BALL

Dimensions of the 10W COB LED chip:

10W COB LED Chip Size Diagram

Image: Diagram showing the dimensions of the 10W COB LED chip. Overall dimensions are 20.0MM x 20.0MM. The light-emitting area is 16.0MM x 8.0MM.

Installation and Setup

Follow these steps for proper installation:

  1. Prepare the Heatsink: Ensure you have an appropriately sized heatsink for a 10W LED chip. Apply a thin, even layer of thermal paste to the back of the LED chip.
  2. Mount the LED Chip: Securely attach the LED chip to the heatsink using screws or other suitable mounting hardware. Ensure good contact between the chip and the heatsink for optimal thermal transfer.
  3. Wiring: Connect the positive (+) and negative (-) terminals of the LED chip to a compatible 12V DC LED driver (power supply). For RGB chips, connect the Red, Green, and Blue channels to their respective outputs on an RGB controller/driver.
  4. Wiring Diagram for RGB COB LED:

    RGB COB LED Wiring Diagram

    Image: Diagram illustrating the wiring for an RGB COB LED. The Red channel requires 6-7V, Green 9-12V, and Blue 9-12V, all at 900mA current. The chip has R, G, and B input terminals.

  5. Power On: Once all connections are secure and verified, connect the LED driver to the main power supply.

Operation

The AELED 12V 10W COB LED Lamp Chip operates immediately upon receiving power from a compatible LED driver. For RGB versions, an appropriate controller is needed to select colors and effects.

Product Overview Video:

Video: A short demonstration showcasing the various colors and functionality of the 12V 10W COB LED chips.

Maintenance

  • Keep the LED chip and heatsink clean from dust and debris to ensure efficient heat dissipation.
  • Avoid touching the light-emitting surface directly to prevent damage or transfer of oils.
  • Regularly check wiring for any signs of wear or loose connections.

Troubleshooting

LED does not light up:
Check power supply connections, ensure correct voltage and current from the LED driver. Verify polarity (+/-). Ensure the LED driver is functioning correctly.
LED is dim or flickers:
Check for insufficient power supply or a faulty LED driver. Ensure proper heat dissipation; overheating can cause performance issues.
LED changes color unexpectedly (RGB only):
Verify connections to the RGB controller. Ensure the controller is functioning correctly and receiving proper input.

User Tips

  • When selecting a Red COB LED, be aware that some users have noted the color may appear closer to pink than a true red. If a precise red hue is critical for your application, consider testing the specific chip or verifying its wavelength (620nm for Red) with a spectrometer if possible.
  • Always use a dedicated LED driver, not a standard power supply, to ensure stable current and voltage for optimal performance and longevity.
  • For outdoor applications, ensure the entire assembly (LED chip, heatsink, and driver) is housed in a waterproof enclosure.

Applications

The AELED 12V 10W COB LED Lamp Chip is versatile and can be widely used in various lighting applications, including but not limited to:

  • Traffic lighting
  • Landscape lighting
  • Advertising lighting
  • Indoor Lighting
  • Special lighting
  • Landscape scene / spot lighting
  • Architectural lighting
  • Display scene
  • Artwork lighting
  • General lighting
  • Amusement park scene
  • Aquarium lighting
COB LED Application Examples

Image: Visual examples of the COB LED chip integrated into various lighting fixtures such as track lighting, LED spotlights, and LED floodlights.

Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For additional documentation, you may refer to the User Manual (PDF).

© 2024 AELED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.